What is potassium amyl xanthate?
Potassium amyl xanthate, PAX (CAS 2720-73-2), is a yellow, water-soluble xanthate and the strongest of the commonly used xanthate collectors. It is supplied mainly as pellets with ≥ 90 % active content.
Its longer amyl chain makes mineral surfaces strongly water-repellent. PAX therefore gives high recovery, including tarnished, oxidised and coarse particles, but is less selective than SIBX.
Where is PAX used?
PAX is used in flotation plants where recovery matters most: scavenger circuits, nickel and gold-bearing pyrite ores, and oxide copper or lead ores after sulphidisation with NaHS. It is commonly paired with MIBC or polyglycol frothers.
How is PAX produced?
PAX is made in the same way as other xanthates, using amyl alcohol and potassium hydroxide.
- Amyl alcohol (pentanol) reacts with potassium hydroxide and carbon disulphide under controlled temperature.
- The xanthate is dried under vacuum to limit decomposition.
- It is extruded into pellets, or milled to powder.
- Each lot is tested for active content, free alkali and moisture, and packed in sealed, lined packaging.
PAX grades
The table compares the common forms; each is then explained with its typical uses.
| Pellets | Powder | |
|---|---|---|
| Active content | ≥ 90 % | ≥ 85–90 % |
| Form | Pellets about 3–15 mm long | Fine powder |
| Dust and stability | Low dust, better storage life | Dissolves faster, more dust |
| Best for | Long routes, most plants | Small plants, manual make-up |
Pellets
The standard export form, with lower dust and slower decomposition in storage.
- Scavenger and rougher flotation
- Nickel sulphide ores
- Gold-bearing pyrite
Powder
Dissolves quickly; used where make-up is manual or for testwork.
- Small concentrators
- Pilot plants
- Laboratory testwork
Typical analysis (pellets)
| Parameter | Typical value |
|---|---|
| Appearance | Pale yellow to yellow-green pellets |
| Active content (purity) | ≥ 90 % |
| Free alkali | ≤ 0.2 % |
| Moisture and volatiles | ≤ 4 % |
| Pellet length | about 3–15 mm |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Formula | C₆H₁₁KOS₂ |
| Molar mass | 202.4 g/mol |
| Solubility in water | Readily soluble |
| Odour | Pungent, sulphurous |
| Typical solution strength | 10–20 % for dosing |
Chemical properties
See PubChem for full data.
- The xanthate group bonds to sulphide surfaces; the five-carbon chain gives stronger water repellency than ethyl, isopropyl or isobutyl xanthates.
- It decomposes faster at low pH, high temperature and in moisture, releasing carbon disulphide, which is highly flammable and toxic; solutions are made fresh and kept alkaline.
- Solid PAX is self-heating in bulk and must be kept away from heat, sparks, acids and oxidisers.
- Typical classification: self-heating (H251), harmful if swallowed (H302), skin and eye irritant (H315, H319) and toxic to aquatic life (H411); see the SDS for each lot.
PAX applications
Scavenger flotation
Recovers slow-floating and middling particles that a more selective collector leaves in the tailings.
Nickel and gold-pyrite ores
Strong collector for pentlandite and for pyrite and arsenopyrite that carry gold.
Oxidised and tarnished ores
With sulphidisation, recovers oxide copper and lead minerals and tarnished sulphides.
Main PAX supplier countries
China produces most of the world’s xanthates. Smaller plants operate in other mining regions, including southern Africa.
PAX in Turkey
PAX is used in Turkey’s copper, polymetallic and gold-pyrite flotation plants, often alongside a more selective xanthate.
Mercafons supplies PAX pellets to Turkey and the region in lined boxes and drums, with dangerous-goods documentation and an SDS for each lot.
PAX price
The PAX price depends on active content, form, packaging, Class 4.2 freight and order size; it is usually a little higher than SIBX. Request a quote.
PAX packaging
All packaging is UN-approved for Class 4.2, with a sealed inner liner.



Shipment
PAX ships as UN 3342, xanthates, Class 4.2, packing group II or III depending on the product. Containers are stowed away from heat sources and segregated from acids and oxidisers; a 20 ft container holds about 13–17 t depending on packaging. See logistics. HS code: 2930.90.
Storage and safety
Storage
Store sealed in a cool, dry, ventilated, shaded store away from heat, ignition sources, acids and oxidisers. Use the oldest stock first; shelf life is typically about 12 months in sealed packaging.
Safety
Use goggles, gloves and dust protection. Make up solutions in a ventilated area with no ignition sources, and monitor for carbon disulphide.
PAX FAQ
When should I use PAX instead of SIBX?
When recovery is limited by slow-floating, coarse or tarnished particles, or in scavenger circuits.
Does PAX reduce concentrate grade?
It can float more pyrite and gangue sulphides, so it is often used in scavengers or blended with a selective collector.
Can PAX and SIBX be used together?
Yes, collector mixtures are common; the ratio is set by testwork.
How long does PAX solution last?
Use it within a short period, ideally the same or next day, as it slowly decomposes.
Is PAX a dangerous good?
Yes, it is UN 3342, Class 4.2, a self-heating substance.
PAX documents: MSDS, TDS and CoA by form
Pellets and powder share one SDS for potassium amyl xanthate. See technical documents.
Pellets
Standard export form.
Last reviewed: November 2026













