API 13A barite: choosing between 4.20 and 4.10 SG
Oil & Gas · 14 Oct 2026

API 13A barite: choosing between 4.20 and 4.10 SG

Two density grades, one specification. What changes for the mud engineer and the buyer.

Drilling fluids are by far the largest market for barite. According to the US Geological Survey, they account for about 70 % of global barite consumption, because barite combines high specific gravity with low abrasiveness, chemical inertness and low cost.

Until 2010 the API specification required a minimum specific gravity of 4.20. API Specification 13A then added a 4.10 SG grade, effective 1 August 2010, to widen the pool of usable ore. Apart from density, both grades must meet the same requirements, including limits on water-soluble alkaline earth metals, coarse residue above 75 µm and fines below 6 µm.

In practice, 4.10 SG barite needs slightly more material, and therefore slightly more solids, for the same mud weight. For most wells the difference is manageable. For high-density or narrow-margin wells, 4.20 SG or hematite may be the better choice. When you send us your target mud weight and volume, we quote both options so the comparison is on cost per barrel, not cost per tonne.

Oil & Gas DrillingRequest a quote