What is sodium hydrosulphide?
Sodium hydrosulphide, NaHS (CAS 16721-80-5), is supplied mainly as yellow flakes containing about 70 % NaHS; the balance is water of crystallisation. It dissolves readily to give an alkaline solution of hydrosulphide ions.
In mineral processing NaHS is the main copper depressant in copper–molybdenum separation and a sulphidising agent for oxidised copper and lead minerals. It is also used in pulp and paper, leather and chemical production.
Where is sodium hydrosulphide used?
The largest mining users are copper–molybdenum concentrators, where NaHS depresses copper sulphides so molybdenite floats. Oxide copper plants use it to sulphidise malachite and similar minerals before PAX or SIBX collectors.
How is sodium hydrosulphide produced?
NaHS is made by absorbing hydrogen sulphide in caustic soda.
- Hydrogen sulphide, often from gas processing or chemical by-product streams, is absorbed in caustic soda solution.
- The resulting NaHS liquor is concentrated by evaporation.
- It is cooled on flaking drums to produce flakes of about 70 %, or shipped as liquid.
- Each lot is tested for NaHS, sodium sulphide, carbonate and iron, and packed in moisture-tight packaging.
Sodium hydrosulphide forms
The table compares the forms supplied to mines; each is then explained with its typical uses.
| Flakes | Liquid solution | |
|---|---|---|
| NaHS content | ≥ 70 % | about 40–45 % |
| Appearance | Yellow to orange flakes | Yellow to green liquid |
| Delivery | Lined bags or steel drums | Road or ISO tankers |
| Best for | Imports, long routes | Plants near a producer |
Flakes 70 %
The standard internationally traded form, dissolved on site in a closed, ventilated make-up tank.
- Cu–Mo separation
- Sulphidisation of oxide ores
- Pulp and leather
Liquid solution
Avoids dissolving on site, but carries more water per tonne of NaHS; offered on request where a regional source exists.
- Large Cu–Mo plants
- Pulp mills
- Continuous dosing
Typical analysis (flakes)
| Parameter | Typical value |
|---|---|
| Appearance | Yellow flakes |
| NaHS | ≥ 70 % |
| Sodium sulphide (Na₂S) | ≤ 4 % |
| Sodium carbonate (Na₂CO₃) | ≤ 1.5 % |
| Iron (Fe) | ≤ 30 ppm |
| Water insolubles | ≤ 0.05 % |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Molar mass (NaHS) | 56.06 g/mol |
| Melting point (flakes) | about 55 °C |
| Solubility in water | Very soluble |
| Solution pH | Alkaline, about 10–12 |
| Odour | Rotten-egg smell of hydrogen sulphide |
Chemical properties
See PubChem for full data.
- HS⁻ ions lower the pulp potential and desorb collectors from copper and iron sulphides, while molybdenite stays floatable.
- On oxidised minerals it forms a sulphide coating that xanthates can adsorb on; overdosing depresses instead, so addition is controlled.
- In contact with acids, or at low pH, it releases highly toxic hydrogen sulphide gas; it also slowly releases H₂S in moist air.
- Causes severe skin burns and eye damage (H314), is toxic in contact with skin (H311), harmful if swallowed (H302) and very toxic to aquatic life (H400); contact with acids liberates toxic gas (EUH031).
Sodium hydrosulphide applications
Copper–molybdenum separation
Added to bulk Cu–Mo concentrate to depress chalcopyrite and other copper minerals; molybdenite is floated with an oil collector. Covered cells and gas monitoring are standard.
Sulphidisation
Controlled additions activate malachite, azurite and cerussite for xanthate flotation.
Pulp and leather
Sulphidity make-up in kraft pulping and dehairing of hides.
Chemicals and effluent
Intermediate for dyes and chemicals, and precipitation of heavy metals as sulphides.
Main sodium hydrosulphide supplier countries
Flake NaHS is produced in China, the United States, India and several European countries. Liquid NaHS is mostly supplied regionally because of its water content.
Sodium hydrosulphide in Turkey
In Turkey NaHS is used by flotation plants at copper and polymetallic mines, and by leather and chemical producers.
Mercafons supplies 70 % flakes to Turkey and the region in lined bags and drums, with dangerous-goods documentation and the SDS in the local language.
Sodium hydrosulphide price
The NaHS price depends on NaHS content, packaging, dangerous-goods freight and lot size. Request a quote.
Sodium hydrosulphide packaging
All packaging is UN-approved, moisture-tight and labelled for Class 8.


Shipment
NaHS flakes ship as UN 2949, sodium hydrosulphide, hydrated, Class 8, packing group II. They must be segregated from acids and kept dry and cool. See logistics. HS code: 2830.10.
Storage and safety
Storage
Store sealed in a cool, dry, ventilated area, away from acids, oxidisers and copper or brass fittings. Moisture and CO₂ cause caking and H₂S release.
Safety
Use chemical goggles, face shield, gloves and protective clothing, with fixed and personal H₂S detectors. Dissolve only in a closed, ventilated tank.
Sodium hydrosulphide FAQ
Why is NaHS used in Cu–Mo separation?
It depresses copper and iron sulphides strongly while molybdenite keeps floating, giving a saleable molybdenum concentrate.
What does 70 % mean?
The flakes contain about 70 % NaHS; the rest is mainly water of crystallisation.
What is the main hazard?
Hydrogen sulphide gas, released if NaHS meets acid or low-pH water; it is toxic and dulls the sense of smell.
Is NaHS the same as sodium sulphide?
No. Sodium sulphide (Na₂S) is more alkaline; both are used in flotation, but NaHS is preferred in Cu–Mo plants.
Can I get NaHS as a liquid?
Where a regional producer exists; please mention it in your request.
Sodium hydrosulphide documents: MSDS, TDS and CoA
Flakes and solution have separate SDSs. See technical documents.
Flakes 70 %
Bags and drums.
Last reviewed: November 2026













