What is hydrated lime?
Hydrated lime, also called slaked lime or calcium hydroxide, Ca(OH)₂ (CAS 1305-62-0), is a fine white alkaline powder made from limestone. It is one of the cheapest and most widely used alkalis in industry.
It is supplied as dry powder with ≥ 90–95 % Ca(OH)₂ and is often mixed on site with water to make milk of lime. Quicklime (CaO) is the related unslaked product.
Where is hydrated lime used?
Hydrated lime is used in water and wastewater treatment, in mining and metallurgy for pH control, in flue-gas desulphurisation, in construction and soil stabilisation, in sugar refining and in the food industry as E526.
How is hydrated lime produced?
High-purity limestone (CaCO₃) is burned in kilns at about 900–1,100 °C, releasing CO₂ and leaving quicklime (CaO).
- Quicklime is crushed and fed to a hydrator, where a controlled amount of water converts it to Ca(OH)₂ with strong heat release.
- The dry hydrate is air-classified and milled to remove grit and reach the target fineness.
- Each lot is tested for available lime, magnesium, carbonate and fineness.
Hydrated lime grades and forms
The table compares grades and forms; each is then explained with its typical uses.
| Standard ≥ 90 % | High-purity ≥ 95 % | Milk of lime | |
|---|---|---|---|
| Ca(OH)₂ | ≥ 90 % | ≥ 95 % | 20–40 % slurry |
| MgO | ≤ 3 % | ≤ 1 % | As source |
| Form | Powder | Fine powder | Pumpable slurry |
| Best for | Mining, construction, effluent | Drinking water, food, chemicals | Continuous dosing on site |
Standard hydrated lime ≥ 90 %
Economical grade for neutralisation and pH control where purity is less critical.
- Mine and process-water pH control
- Acid mine drainage neutralisation
- Soil stabilisation and mortars
- Industrial effluent neutralisation
High-purity hydrated lime ≥ 95 %
Low magnesium and impurities, high reactivity and fine particle size. Drinking-water grades meet EN 12518; food grade meets E526.
- Drinking-water softening and remineralisation
- Flue-gas desulphurisation
- Sugar refining
- Calcium chemicals and food (E526)
Milk of lime
A slurry made by mixing hydrated lime with water on site, or delivered ready-made. It is pumped and dosed continuously without dust.
- Large water and wastewater plants
- Mineral processing circuits
- Sludge conditioning
Typical analysis
| Parameter | Standard | High-purity |
|---|---|---|
| Ca(OH)₂ | ≥ 90 % | ≥ 95 % |
| Available CaO | ≥ 68 % | ≥ 72 % |
| MgO | ≤ 3.0 % | ≤ 1.0 % |
| CO₂ (as CaCO₃) | ≤ 5 % | ≤ 3 % |
| SiO₂ + Al₂O₃ + Fe₂O₃ | ≤ 2 % | ≤ 1 % |
| Residue on 90 µm | ≤ 5 % | ≤ 2 % |
| Moisture | ≤ 1 % | ≤ 1 % |
Drinking-water grades are supplied to EN 12518. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Appearance | White, fine, odourless powder |
| Molar mass | 74.09 g/mol |
| Density (particle) | about 2.24 g/cm³ |
| Bulk density | about 0.4–0.6 t/m³ |
| Solubility in water | about 1.7 g/L at 20 °C (falls as temperature rises) |
| pH (saturated solution) | about 12.4 |
| Decomposition | loses water to CaO above about 580 °C |
Chemical properties
Calcium hydroxide is a strong base with low solubility. Full data is on PubChem.
- Neutralises acids and raises pH to about 12.4 at saturation.
- Absorbs CO₂ from air and slowly turns back into calcium carbonate.
- Precipitates heavy metals as hydroxides and removes hardness in lime softening.
- Causes serious eye damage and skin irritation (GHS H318, H315, H335).
Hydrated lime uses
Water and wastewater
Lime raises pH, softens water by precipitating calcium carbonate, removes phosphate and metals, and stabilises sludge. It is often used with soda ash and ferric chloride.
Mining and metallurgy
It sets pH in flotation, depresses pyrite and keeps protective alkalinity at pH 10.5–11 in gold cyanidation with sodium cyanide.
Flue-gas cleaning
Dry or slurry lime captures SO₂ and HCl in power plants and incinerators.
Construction
It improves workability of mortars and stabilises clay soils under roads.
Sugar, food and chemicals
Lime purifies sugar juice, is a food additive (E526) and is a raw material for calcium salts.
Main hydrated lime supplier countries
Lime is produced in most countries because limestone is widely available; China is by far the largest producer, followed by the United States, India, Russia, Brazil and Japan. See the USGS lime statistics.
Hydrated lime in Turkey
Turkey has abundant high-purity limestone and many lime plants, which supply quicklime and hydrated lime to steel, construction, water treatment and mining. Turkish lime also reaches neighbouring markets by road and sea.
Mercafons supplies standard and high-purity hydrated lime from Turkey in bags, big bags and bulk, with available lime and fineness confirmed on the CoA.
Hydrated lime price per ton
The hydrated lime price depends on purity, fineness, packaging and freight; because lime is light and bulky, freight often costs more than the product. Request a quote.
Hydrated lime packaging
Packages are marked with product, grade, lot number and net weight.



Shipment
Hydrated lime is not a dangerous good for transport. Because of its low bulk density, a 20 ft container is volume-limited at about 15–18 t. Keep it dry: moisture and CO₂ reduce quality. See logistics. HS code: 2522.20.
Storage and safety
Storage
Store dry and covered in closed bags or silos; exposure to air slowly converts it to carbonate. Use within about 6–12 months.
Safety
Lime dust can cause serious eye damage and irritates skin and airways. Wear tight goggles, gloves and a dust mask, and keep an eyewash station nearby.
Hydrated lime FAQ
What is the difference between hydrated lime and quicklime?
Quicklime is CaO; it reacts violently with water. Hydrated lime is Ca(OH)₂, already slaked, and safer to handle.
Is hydrated lime the same as limestone?
No. Limestone is calcium carbonate; burning and hydrating it gives the much more reactive calcium hydroxide.
How do I make milk of lime?
Mix hydrated lime into water under stirring, usually to 10–30 %, and keep it agitated. Our engineers can size the system.
Why is lime used in gold cyanidation?
It keeps pH above about 10.5 so cyanide stays in solution and toxic HCN gas is not released.
Lime or caustic soda for pH control?
Lime is cheaper and adds calcium; caustic soda is cleaner and fully soluble but costs more.
Hydrated lime documents: MSDS, TDS and CoA by grade
Standard and high-purity grades share one SDS for calcium hydroxide; drinking-water and food grades add certificates. See technical documents.
Standard hydrated lime
For mining, construction and effluent.
High-purity, drinking-water and food grades
Additional certification.
Last reviewed: November 2026











