What are flotation frothers?
Flotation frothers are surface-active reagents that create small, stable bubbles and a froth that carries floated minerals to the concentrate launder. Besides the alcohol MIBC, the main families are polyglycol ethers, polypropylene glycols (PPG) and alcohol or ester blends.
Polyglycol frothers give a stronger, more persistent froth than MIBC. They are chosen where coarse particles, high mass pull or variable water quality need extra froth stability.
Where are polyglycol frothers used?
They are used in copper, gold, lead–zinc and coal flotation, often blended with MIBC. They work with collectors such as SIBX and PAX, and help in plants using recycled or saline process water.
How are frothers produced?
Most synthetic frothers are made from propylene oxide.
- Propylene oxide is polymerised onto methanol or another alcohol to give polyglycol ethers, or onto water or propylene glycol to give PPG.
- Chain length is controlled to set molecular weight, solubility and froth strength.
- Alcohol and ester frothers are blended from purified alcohol streams.
- Each batch is tested for active content, water, density and appearance.
Frother types
The table compares the main types; each is then explained with its typical uses.
| Polyglycol ether | Polypropylene glycol | Alcohol or ester blend | |
|---|---|---|---|
| Froth | Persistent, strong | Strongest, most persistent | Brittle to medium |
| Selectivity | Medium | Lower | High |
| Water solubility | Fully soluble | Soluble at lower molecular weight | Limited |
| Typical transport class | Usually not dangerous | Usually not dangerous | Often Class 3 |
Polyglycol ethers
Versatile frothers that combine good froth stability with reasonable selectivity.
- Copper and gold flotation
- Blends with MIBC
- Saline water
Polypropylene glycols
Higher molecular weight gives a very stable froth for coarse or heavily loaded froths.
- Coarse-particle recovery
- High mass pull
- Coal flotation
Alcohol and ester blends
Alternatives to MIBC with a similar, more selective froth.
- Fine-particle flotation
- Cleaner circuits
- MIBC replacement trials
Typical specification (polyglycol ether frother)
| Parameter | Typical value |
|---|---|
| Appearance | Clear, colourless to pale yellow liquid |
| Active content | ≥ 95 % |
| Water | ≤ 0.5 % |
| Density at 20 °C | about 0.95–1.00 g/cm³ |
| Flash point | Above 100 °C |
Each product has its own specification; the binding one is in our offer and the Certificate of Analysis.
Physical properties
| Property | Polyglycol ether | Alcohol blend |
|---|---|---|
| Form | Liquid | Liquid |
| Odour | Mild | Alcohol-like |
| Solubility in water | Fully soluble | Slightly soluble |
| Flash point | Usually above 100 °C | Often 40–60 °C |
| Dosing | Neat or diluted | Neat |
Chemical properties
- Frothers adsorb at the air–water interface, reducing bubble size and stabilising the froth; they do not collect minerals themselves.
- Longer polyglycol chains give stronger, wetter froths; shorter chains and alcohols give drier, more selective froths.
- Persistent froth can carry over into thickeners and pumps, so dosage is controlled and often blended with MIBC.
- Classification depends on composition; the SDS of each product is binding.
Frother applications
Coarse-particle flotation
A stronger froth holds heavier, partly liberated particles that would drop back from a brittle MIBC froth.
High mass pull and roughers
Keeps the froth stable when large amounts of mineral are floated.
Recycled and saline water
Maintains froth behaviour when water chemistry varies.
Tuning with MIBC
Blending lets a plant adjust froth strength and selectivity without changing the whole reagent scheme.
Main frother supplier countries
Polyglycol frothers are made from propylene oxide in the United States, Europe and Asia. Alcohol blends are produced in many chemical regions.
Flotation frothers in Turkey
Turkish copper, gold and lead–zinc plants use MIBC and polyglycol frothers, often in blends set by plant trials.
Mercafons supplies polyglycol and blended frothers to Turkey and the region in drums and IBCs, and can send samples for laboratory testwork.
Frother prices
Frother prices depend on type, active content, propylene oxide costs, packaging and volume. Request a quote or a sample.
Frother packaging
Packages are labelled with product, batch and net weight, and for dangerous goods where applicable.


Shipment
Most polyglycol frothers are not dangerous goods for transport. Flammable alcohol blends may ship as UN 1987, alcohols, n.o.s., Class 3. A 20 ft container holds about 16–20 t in drums or IBCs. See logistics. HS code: 3824.99 for blends; pure products may use other headings.
Storage and safety
Storage
Store closed in a cool, covered area away from oxidisers; store flammable blends as Class 3 liquids. Shelf life is typically 12–24 months in sealed packaging.
Safety
Wear goggles and chemical-resistant gloves; frothers can irritate the eyes. Follow the SDS for each product.
Flotation frothers FAQ
Which frother should I use?
MIBC for fine, selective flotation; polyglycols where coarse particles or high mass pull need a stronger froth. Testwork decides.
Can polyglycol frothers be blended with MIBC?
Yes, blends are common and let plants tune froth strength.
Why can too much polyglycol be a problem?
A persistent froth can reduce grade and cause froth carry-over into thickeners and pumps.
Are polyglycol frothers dangerous goods?
Most are not; some alcohol blends are Class 3. Check the SDS.
Can I get samples for testing?
Yes, we can supply samples for laboratory or plant trials; please mention it in your request.
Frother documents: MSDS, TDS and CoA by type
Each frother has its own SDS and TDS. See technical documents.
Polyglycol frothers
Ethers and PPG.
Alcohol and ester blends
MIBC alternatives.
Last reviewed: November 2026













