What is MIBC?
Methyl isobutyl carbinol, MIBC (4-methyl-2-pentanol, CAS 108-11-2), is a colourless, slightly water-soluble alcohol. It is the benchmark frother in mineral flotation and is supplied at ≥ 98.5 % purity.
MIBC produces a fine, brittle froth with fast kinetics and low water entrainment, which helps concentrate grade. It is the reference against which other frothers are compared.
Where is MIBC used?
Most MIBC goes to mineral flotation: copper, lead–zinc, nickel, gold-bearing sulphides and coal, together with collectors such as SIBX and PAX. It is also an intermediate for lubricant additives and a solvent.
How is MIBC produced?
MIBC is made from acetone through methyl isobutyl ketone (MIBK).
- Acetone is condensed to mesityl oxide, which is hydrogenated to MIBK.
- Further hydrogenation of MIBK, or co-production in the MIBK process, gives MIBC.
- The crude alcohol is purified by distillation.
- Each lot is tested for purity by gas chromatography, water, acidity and colour.
MIBC grades
The table compares the common grades; each is then explained with its typical uses.
| Flotation grade | High-purity grade | |
|---|---|---|
| Purity (GC) | ≥ 98.5 % | ≥ 99 % |
| Water | ≤ 0.1 % | ≤ 0.1 % |
| Colour | ≤ 15 Pt-Co | ≤ 10 Pt-Co |
| Best for | Mineral and coal flotation | Chemical synthesis, solvents |
Flotation grade
The standard grade for concentrators, dosed neat into conditioning tanks or cell feed.
- Copper and lead–zinc flotation
- Coal flotation
- Fine-particle flotation
High-purity grade
Tighter limits for use as a chemical intermediate or solvent.
- Lubricant additive production
- Solvent for coatings and dyes
- Chemical synthesis
Typical analysis (flotation grade)
| Parameter | Typical value |
|---|---|
| Appearance | Clear, colourless liquid |
| MIBC (GC) | ≥ 98.5 % |
| MIBK | ≤ 0.5 % |
| Water | ≤ 0.1 % |
| Acidity (as acetic acid) | ≤ 0.01 % |
| Colour | ≤ 15 Pt-Co |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Molar mass | 102.17 g/mol |
| Boiling point | about 132 °C |
| Flash point (closed cup) | about 41 °C |
| Density at 20 °C | about 0.81 g/cm³ |
| Solubility in water | about 16 g/L at 20 °C |
Chemical properties
See PubChem for full data.
- MIBC adsorbs at the air–water interface, reducing bubble coalescence so the cell produces many small bubbles.
- Its froth is brittle and breaks quickly in the launder, which limits entrainment of fine gangue.
- It is chemically stable under flotation conditions and does not act as a collector.
- Flammable liquid and vapour (H226) that may cause respiratory irritation (H335).
MIBC applications
Sulphide flotation
Standard frother for copper, lead–zinc, nickel and gold circuits, often at a few tens of grams per tonne or less.
Coal flotation
Frother for fine coal recovery, often with a diesel or kerosene collector.
Frother blends
Blended with polyglycol frothers to give a stronger froth for coarse particles while keeping selectivity.
Chemical uses
Intermediate for zinc dithiophosphate lubricant additives and a solvent for coatings and dyes.
Main MIBC supplier countries
MIBC is made by a limited number of producers, mainly in the United States, South Africa and Asia.
MIBC in Turkey
Turkey imports MIBC for its copper, lead–zinc and gold flotation plants and for chemical and lubricant industries.
Mercafons supplies flotation-grade MIBC to Turkey and the region in drums, IBCs and ISO tanks, with dangerous-goods documentation and the SDS.
MIBC price
The MIBC price follows acetone and MIBK markets and depends on packaging, Class 3 freight and volume. Request a quote.
MIBC packaging
All packaging is UN-approved for Class 3 flammable liquids.



Shipment
MIBC ships as UN 2053, methyl isobutyl carbinol, Class 3, packing group III. Keep it away from heat, sparks and oxidisers, and earth equipment during transfer. See logistics. HS code: 2905.19.
Storage and safety
Storage
Store closed in a cool, ventilated flammable-liquids area, away from ignition sources and oxidisers. Steel and stainless tanks are suitable; use earthed, bunded storage.
Safety
Use goggles, chemical-resistant gloves and good ventilation; use a respirator where vapour levels are high. No smoking or open flames.
MIBC FAQ
Why is MIBC the reference frother?
It gives fast, selective flotation with a fine, brittle froth and low entrainment, so it is the baseline in most testwork.
MIBC or polyglycol frother?
MIBC gives a brittle froth for fines and grade; polyglycols give a more persistent froth for coarse particles and high mass pull.
Is MIBC diluted before dosing?
Usually not. It is dosed neat with small metering pumps because it is only slightly soluble in water.
Is MIBC a dangerous good?
Yes, it is UN 2053, Class 3, with a flash point of about 41 °C.
Can MIBC be blended with other frothers?
Yes, blends with polyglycols are common; we can supply both, see flotation frothers.
MIBC documents: MSDS, TDS and CoA by grade
Both grades share one SDS for 4-methyl-2-pentanol. See technical documents.
Flotation grade
≥ 98.5 %.
Last reviewed: November 2026













