H₂SO₄Drag to rotate
3D ball-and-stick modelHOS
Industrial chemicals

Sulphuric Acid

98 % technical

CAS 7664-93-9HS 2807.00
Product family
Chemicals
Forms
98 %93–96 %
Packaging
1,000 L IBCISO tankRoad tanker
Request TDS / MSDS

What is sulphuric acid?

Sulphuric acid, H₂SO₄ (CAS 7664-93-9), is a dense, oily, colourless to slightly yellow mineral acid. It is the world’s highest-volume industrial chemical and a strong acid, dehydrating agent and oxidiser when concentrated.

It is traded mainly as 98 % technical grade, as 93–96 % with a much lower freezing point, and as oleum (fuming sulphuric acid) for sulphonation.

Where is sulphuric acid used?

Sulphuric acid makes phosphate fertilisers, leaches copper, uranium and nickel in mining, catalyses alkylation in refineries, adjusts pH in water treatment, pickles steel, and is a raw material for aluminium sulphate, titanium dioxide, detergents and batteries.

How is sulphuric acid produced?

Almost all sulphuric acid is made by the contact process.

  • Sulphur is burned to SO₂, or SO₂ is recovered from copper, zinc and lead smelter off-gas or from pyrite roasting.
  • SO₂ is oxidised to SO₃ over a vanadium pentoxide catalyst at about 420–450 °C.
  • SO₃ is absorbed in 98 % acid, then diluted with water to the target strength; oleum is made by absorbing extra SO₃.
  • Each lot is tested for concentration, iron, residue on ignition and heavy metals.

Sulphuric acid grades

The table compares the grades; each is then explained with its typical uses.

98 % technical93–96 %Drinking-water gradeOleum
Strength≥ 98.0 % H₂SO₄93–96 % H₂SO₄per EN 89920–25 % free SO₃
Freezing pointabout +3 °Cabout −35 to −14 °Cper strengthvaries with SO₃
TransportUN 1830, Class 8UN 1830, Class 8UN 1830, Class 8UN 1831, Class 8 (6.1)
Best forFertilisers, leaching, chemicalsCold climates, fertilisersDrinking-water pH controlSulphonation, LABSA

98 % technical sulphuric acid

The standard commercial grade; the highest strength that can be stored in carbon-steel tanks without corrosion problems.

Typical uses
  • Phosphoric acid and fertilisers
  • Copper and uranium leaching
  • Refinery alkylation
  • Aluminium sulphate and chemicals

93–96 % sulphuric acid

Slightly weaker acid that stays liquid in cold weather, where 98 % would freeze.

Typical uses
  • Winter storage and transport
  • Superphosphate fertilisers
  • Steel pickling

Drinking-water grade

Certified for treatment of water intended for human consumption, with low heavy metals.

Typical uses
  • pH correction in drinking water
  • Alkalinity reduction ahead of RO
  • Regeneration of cation exchangers

Oleum (fuming sulphuric acid)

Sulphuric acid with dissolved free SO₃, for reactions that need a very strong sulphonating agent.

Typical uses
  • Linear alkylbenzene sulphonic acid (LABSA)
  • Dyes and intermediates
  • Strengthening acid for chemical processes

Typical analysis (98 % technical)

ParameterTypical value
H₂SO₄≥ 98.0 %
Iron (Fe)≤ 50 mg/kg
Residue on ignition≤ 0.02 %
Lead (Pb)≤ 50 mg/kg
Arsenic (As)≤ 1 mg/kg
Mercury (Hg)≤ 10 mg/kg
AppearanceClear, colourless to light yellow, oily

Drinking-water grades are supplied to EN 899. Smelter acids can carry more metals; the binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue (98 %)
Molar mass98.08 g/mol
Density (20 °C)about 1.84 g/cm³
Boiling pointabout 330–338 °C
Freezing pointabout +3 °C
Viscosity (20 °C)about 25 mPa·s
Vapour pressurevery low at ambient temperature
MiscibilityMiscible with water with strong heat release

Chemical properties

See PubChem for full data.

  • A strong diprotic acid that neutralises bases to sulphates.
  • Mixing with water releases a large amount of heat: always add acid slowly to water, never water to acid.
  • Concentrated acid dehydrates and chars organic materials such as sugar, wood and cotton.
  • Diluted acid attacks steel and releases flammable hydrogen. It causes severe skin burns and eye damage (H314) and may be corrosive to metals (H290).

Sulphuric acid applications

Fertilisers

About half of world demand goes to digesting phosphate rock into phosphoric acid for DAP, MAP and superphosphates.

Mining and metallurgy

It leaches copper oxide ores for SX-EW, uranium and nickel laterites, and makes copper sulphate and zinc sulphate.

Refining and chemicals

It catalyses isobutane alkylation for high-octane gasoline and is used to make titanium dioxide, caprolactam and LABSA.

Water treatment

It lowers pH and alkalinity ahead of RO and makes coagulants such as aluminium sulphate.

Metal finishing and batteries

It pickles steel and is the electrolyte in lead-acid batteries.

Main sulphuric acid supplier countries

China is the largest producer. Large exporters include Japan, South Korea and European countries, much of it smelter acid, while Chile, Morocco, India and Brazil are big consumers for mining and fertilisers.

Sulphuric acid in Turkey

Turkey produces sulphuric acid mainly from sulphur burning and smelter gas, much of it for its fertiliser industry, and imports additional volumes for mining, chemicals and water treatment.

Mercafons supplies 98 % and 93–96 % sulphuric acid through its Istanbul office, in IBCs, ISO tanks and road tankers, with CoA for each lot.

Sulphuric acid price per ton

The sulphuric acid price is volatile: it follows sulphur prices, smelter output and fertiliser demand, and freight is often a large share of delivered cost. Request a quote.

Sulphuric acid packaging

All packaging is UN-approved for Class 8 corrosives and marked with hazard labels.

1,000 L IBC – Sulphuric Acid packaging | Mercafons
1,000 L IBC1,000 L acid-resistant IBCs, about 1,800 kg.
ISO tank – Sulphuric Acid packaging | Mercafons
ISO tankLined or steel ISO tanks, about 20–25 t.Photo: Gerd Fahrenhorst, CC BY 4.0, via Wikimedia Commons (brands blurred)
Road tanker – Sulphuric Acid packaging | Mercafons
Road tankerRoad tankers for regular regional deliveries.

Shipment

Sulphuric acid is UN 1830, Class 8, packing group II; oleum is UN 1831. Keep it away from bases, water-reactive materials, metals powders and organics. Because it is dense, a 20 ft container is weight-limited to about 18–20 t. See logistics. HS code: 2807.00.

Storage and safety

Storage

Store 93–98 % acid in carbon-steel or lined tanks with desiccant-dried vents, in bunded areas. Keep moisture out: diluted acid corrodes steel and forms hydrogen. Protect 98 % acid from freezing in winter.

Safety

Wear a face shield, acid-resistant suit, gloves and boots. Provide safety showers and eyewash. Neutralise spills with lime or soda ash after containment; never add water to concentrated acid.

Sulphuric acid FAQ

Why does 98 % sulphuric acid freeze in winter?

98 % acid freezes at about +3 °C, while 93 % stays liquid to about −35 °C, so weaker acid is used in cold climates.

How do I dilute sulphuric acid safely?

Add the acid slowly to cold water with stirring and cooling; adding water to acid can boil and spatter violently.

What is the difference between sulphur-burning and smelter acid?

Sulphur-burning acid is usually cleaner; smelter acid may contain more metals but is often cheaper.

Can sulphuric acid be stored in steel tanks?

Yes at 93–98 %, if kept dry; dilute acid needs lined, plastic or alloy tanks.

Is sulphuric acid a precursor chemical?

It is listed in international precursor controls, so some countries require end-user documents.

Sulphuric acid documents: MSDS, TDS and CoA by grade

Sulphuric acid grades share one SDS; oleum has its own because free SO₃ adds inhalation hazards. See technical documents.

Last reviewed: November 2026