What is activated carbon?
Activated carbon (activated charcoal, CAS 7440-44-0 / 64365-11-3) is a highly porous form of carbon with an internal surface of about 900–1,200 m² per gram. Its pores adsorb organic compounds, chlorine, taste and odour, micropollutants and, in mining, gold-cyanide complexes.
It is made from coconut shell, coal or wood and supplied as powder (PAC), granules (GAC) or extruded pellets. The raw material sets the pore structure, and the form sets how it is used.
Where is activated carbon used?
Activated carbon is used in drinking-water and wastewater treatment, in RO pre-treatment for dechlorination, in gold mining carbon-in-pulp (CIP) and carbon-in-leach (CIL) circuits, in sugar, food and beverage purification for FMCG producers, and in air and gas cleaning.
How is activated carbon produced?
Production has two stages, carbonisation and activation.
- Carbonisation: the raw material is heated without air at about 400–700 °C to drive off volatiles and form char.
- Physical (steam) activation: char is treated with steam or CO₂ at about 800–1,000 °C, which burns out pores. Coconut and coal grades are made this way.
- Chemical activation: wood is impregnated with phosphoric acid and heated at about 400–600 °C, giving larger pores for decolourisation.
- The product is crushed, sieved, sometimes acid-washed, and tested for iodine number, hardness, ash, moisture and size.
Activated carbon grades and forms
The table compares the main forms and raw materials; each is then explained with its typical uses.
| Powder (PAC) | Coal GAC | Coconut GAC | Pellet | |
|---|---|---|---|---|
| Size | about 90 % < 45 µm | 8×30, 12×40 mesh | 6×12, 8×30, 12×40 mesh | 1.5–4 mm |
| Iodine number | 800–1,000 mg/g | 900–1,000 mg/g | 1,000–1,100 mg/g | 800–1,100 mg/g |
| Hardness | — | ≥ 90 % | ≥ 97 % | ≥ 95 % |
| Best for | Seasonal taste and odour, batch use | Drinking-water filters | Gold CIP/CIL, dechlorination | Air and gas phase |
Powdered activated carbon (PAC)
Fine powder dosed as a slurry and removed with the sludge. Flexible for seasonal or emergency use.
- Taste, odour and algal toxins in drinking water
- Sugar, glucose and edible-oil decolourisation
- Batch purification of chemicals and pharmaceuticals
Coal-based GAC
Wide pore range and good value for fixed filter beds; can be thermally reactivated.
- Drinking-water filters and post-filtration
- Removal of pesticides and organic micropollutants
- Industrial and groundwater remediation
Coconut-shell GAC
Mostly fine micropores, high hardness and low ash; the standard for gold recovery and dechlorination.
- Gold adsorption in CIP and CIL
- RO pre-treatment and dechlorination
- Point-of-use and beverage water filters
Extruded pellets and impregnated grades
Cylindrical pellets give low pressure drop; impregnated grades target specific gases.
- Odour control at treatment plants
- Solvent recovery and gas cleaning
- Hydrogen sulphide removal
Typical analysis
| Parameter | Coconut GAC | Coal GAC | PAC |
|---|---|---|---|
| Iodine number | ≥ 1,000 mg/g | ≥ 900 mg/g | ≥ 800 mg/g |
| Hardness (ball-pan) | ≥ 97 % | ≥ 90 % | — |
| Ash | ≤ 3 % | ≤ 12 % | ≤ 10 % |
| Moisture (as packed) | ≤ 5 % | ≤ 5 % | ≤ 10 % |
| Apparent density | about 0.46–0.52 g/cm³ | about 0.42–0.50 g/cm³ | about 0.30–0.50 g/cm³ |
| pH (water extract) | about 8–10 | about 7–10 | about 5–10 |
Drinking-water grades are supplied to EN 12915-1 (GAC) or EN 12903 (PAC) and AWWA B604/B600. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Appearance | Black granules, pellets or powder |
| BET surface area | about 900–1,200 m²/g |
| Pore structure | Coconut: micropores; coal: micro and meso; wood: meso and macro |
| Solubility | Insoluble in water and solvents |
| Ignition | Combustible; ignition temperature above about 400 °C |
| Typical filter contact time | about 10–20 min empty-bed contact time |
Chemical properties
Activated carbon is mostly elemental carbon with surface oxygen groups. See PubChem for carbon data.
- Adsorbs non-polar and large organic molecules best; small, polar and inorganic ions are poorly removed.
- Reduces free chlorine and chloramine at its surface, which is why GAC dechlorinates water.
- Adsorbs gold and silver cyanide complexes; gold is later stripped by hot caustic-cyanide elution.
- Spent carbon can be thermally reactivated at about 650–900 °C and reused.
Activated carbon applications
Drinking water
GAC filters and PAC doses of about 5–50 mg/L remove taste, odour, pesticides and algal toxins. Powdered carbon is dosed together with coagulants such as polyaluminium chloride.
Dechlorination and RO pre-treatment
Coconut GAC removes chlorine before RO membranes as an alternative or back-up to SMBS.
Gold recovery (CIP/CIL)
Hard coconut-shell carbon, usually 6×12 or 6×16 mesh, adsorbs gold from sodium cyanide leach pulp; low attrition limits gold losses in fines.
Sugar, food and chemicals
Wood and coal grades decolourise sugar, glucose, glycerine and edible oils.
Air and gas
Pellets control odour and recover solvents.
Main activated carbon supplier countries
China is the largest producer, mainly of coal-based carbon. Coconut-shell carbon comes mostly from India, Sri Lanka, the Philippines and Indonesia, and the United States and Europe produce coal and wood grades.
Activated carbon in Turkey
Turkey imports most of its activated carbon for drinking water, RO plants, food, beverages and its growing gold-mining sector.
Mercafons supplies coconut, coal and wood grades through its Istanbul office, with CoA for each lot and drinking-water certificates on request.
Activated carbon price per ton
The activated carbon price depends on raw material, iodine number, hardness, mesh size and certification; coconut grades for gold cost more than coal grades. Request a quote.
Activated carbon packaging
Packages are marked with product, grade, mesh size, lot number and net weight.


Shipment
Steam-activated carbon is normally not regulated for transport (special provision 646); some chemically activated or very fine grades may be UN 1362, Class 4.2. Because of its low density, a 20 ft container holds about 10–14 t. See logistics. HS code: 3802.10.
Storage and safety
Storage
Keep sealed and dry, away from solvents, fuels and oxidisers, because carbon adsorbs vapours from the air. Store away from ignition sources.
Safety
Dust is combustible and irritates eyes and lungs. Wet carbon removes oxygen from enclosed spaces: test the air before entering filters or vessels. Wear a dust mask and goggles.
Activated carbon FAQ
What is the difference between PAC and GAC?
PAC is a fine powder dosed into water and removed with sludge; GAC is granular and used in fixed filter beds that can be reactivated.
Why is coconut-shell carbon used for gold?
It is very hard, so it resists attrition in agitated tanks, and its micropores adsorb gold-cyanide strongly.
What does the iodine number mean?
It measures adsorption of iodine in mg/g and indicates micropore volume; higher numbers mean more adsorption capacity for small molecules.
How often should GAC be replaced?
It depends on load and target; drinking-water filters often run months to years, and breakthrough is monitored.
Can activated carbon remove salts or hardness?
No. It removes organics and chlorine; salts need RO or ion exchange.
Activated carbon documents: MSDS, TDS and CoA by form
GAC and PAC have separate SDS and TDS because dust and fire properties differ; drinking-water grades add certificates. See technical documents.
Granular activated carbon (GAC)
Coconut and coal grades.
Powdered activated carbon (PAC)
Water and decolourisation grades.
Drinking-water grades
GAC and PAC.
Last reviewed: November 2026











