NaOHDrag to rotate
3D ball-and-stick modelHNaO
Industrial chemicals

Sodium Hydroxide (Caustic Soda)

Flakes / pearls ≥ 98 %, liquid 48–50 %

CAS 1310-73-2HS 2815.11
Product family
Chemicals
Forms
FlakesPearls / prillsLiquid 48–50 %
Packaging
25 kg bags1–1.5 t big bags1,000 L IBCISO tank
Request TDS / MSDS

What is caustic soda?

Caustic soda is the common name for sodium hydroxide (NaOH), CAS 1310-73-2, EC 215-185-5. It is a strong, low-cost alkali and one of the most produced chemicals in the world.

It comes in three forms: solid caustic soda flakes and caustic soda pearls (98.5–99 % NaOH), and liquid caustic soda 48–50 %, also called caustic lye. The chemistry is the same, but handling, freight cost and safety documents differ, so each form is explained below.

Where is caustic soda used?

Caustic soda neutralises acids, raises pH and dissolves fats and proteins. The largest users are alumina refineries, pulp and paper mills, soap and detergent makers, textile mills and chemical plants. It is also a standard chemical in water treatment, oil refining, mining, drilling fluids and CIP cleaning in food and FMCG plants.

As a rule, large continuous users buy liquid, while smaller, remote or batch users buy flakes or pearls.

How is caustic soda produced?

Almost all sodium hydroxide is made by the chlor-alkali process: electrolysis of purified brine, which gives chlorine, hydrogen and caustic soda together, about 1.1 t of NaOH per tonne of chlorine. Modern membrane cells give a pure solution of about 32 %; older diaphragm cells give a weaker, saltier one.

  • Liquid 48–50 %: the cell liquor is concentrated in multi-effect evaporators.
  • Flakes: evaporation continues to a water-free melt above 318 °C, which is cooled on a rotating drum and broken into flakes.
  • Pearls: the same melt is sprayed at the top of a prilling tower; the droplets solidify into spheres as they fall.

Caustic soda grades and forms

Two choices define the product: the form (flakes, pearls or liquid) and the grade (purity, mainly salt, chlorate, iron and heavy metals). The table compares the forms; each is then explained with its typical uses.

FlakesPearlsLiquid 48–50 %
NaOH≥ 98.5 %≥ 99 %48–50.5 %
ShapeFlakes, about 0.5–1.5 mm thickSpheres, about 0.5–1.5 mmClear solution
HandlingDissolves fast; some dustFree-flowing; low dustNo dissolving; pumped
FreightPay for NaOH onlyPay for NaOH onlyHalf the weight is water
Site needsDry store, dissolving tankDry store, feederTanks, pumps, heating in winter

Caustic soda flakes 98.5–99 %

The most traded solid form and usually the cheapest per tonne of NaOH far from the producer. Dissolves fast but can dust and cake.

Typical uses
  • Soap and detergent plants
  • Textile scouring and mercerising
  • Drilling-mud pH at the rig
  • Effluent neutralisation at small plants
  • Batch chemical synthesis

Caustic soda pearls 99 %

Round prills that pour like sand, with less dust and caking than flakes; ideal for feeders and powder blending.

Typical uses
  • Automatic dosing systems
  • Powder detergents and drain cleaners
  • Biodiesel (sodium methoxide)
  • Laboratory and fine chemicals
  • Retail cleaning products

Liquid caustic soda 48–50 %

Ready to use, with no dust or dissolving heat; cheapest for large users near a producer or port. Freight includes the water, and it crystallises below about 12 °C.

Typical uses
  • Alumina refineries
  • Pulp and paper mills
  • Refinery caustic washing
  • Municipal water pH control
  • Demineralisation and CIP systems

Food grade (E524) and membrane grade

Any form can be food grade, meeting E524 criteria of EU Regulation 231/2012 and FCC. Membrane grade has very low salt for chloride-sensitive processes.

Typical uses
  • Dairy and brewery CIP
  • Fruit and vegetable peeling
  • Olive curing and bakery
  • Pharmaceutical intermediates

Typical analysis by form

ParameterFlakesPearlsLiquid 50 %Food grade (solid)
NaOH≥ 98.5 %≥ 99.0 %48.0–50.5 %≥ 99.0 %
Na₂CO₃≤ 0.5 %≤ 0.4 %≤ 0.1 %≤ 0.4 %
NaCl≤ 0.05 %≤ 0.03 %≤ 0.01 %≤ 0.03 %
Fe₂O₃≤ 0.005 %≤ 0.005 %≤ 0.0008 %≤ 0.002 %
NaClO₃≤ 0.005 %≤ 0.005 %≤ 0.001 %≤ 0.002 %
Pb / Hg———≤ 0.5 / ≤ 0.1 mg/kg

Typical values are a guide. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyFlakes / pearlsLiquid 50 %
AppearanceWhite, odourless solidClear, colourless liquid
Density2.13 g/cm³about 1.52 g/cm³ at 20 °C
Bulk densityabout 0.9–1.2 t/m³—
Melting / crystallisationmelts at 318 °Ccrystallises below about 12 °C
Solubilityabout 1,100 g/L at 20 °C, strongly exothermicmixes with water, releases heat
pH (1 % solution)about 13.4about 13.4

Chemical properties

A strong base that dissociates fully in water; full data on PubChem.

  • Neutralises acids with strong heat release, forming salt and water.
  • Absorbs water and CO₂ from air, slowly forming sodium carbonate.
  • Saponifies fats and oils; hydrolyses proteins.
  • Attacks aluminium, zinc and tin, releasing flammable hydrogen.
  • Corrosive to skin and eyes (GHS: H314, H290).

Caustic soda uses

Alumina production

In the Bayer process, hot liquid caustic dissolves alumina from bauxite.

Pulp and paper

Kraft pulping, bleaching and de-inking use liquid caustic to break down lignin.

Soap, detergents and textiles

NaOH turns oils into soap and is used for cotton mercerising, mostly as flakes or pearls.

Water treatment

It raises pH, neutralises acidic effluent and regenerates anion resins, alongside sulfuric acid and hydrochloric acid.

Refining, drilling and CIP

Refineries remove H₂S with caustic, rigs use flakes for mud pH, and food plants use 1–2 % solutions for CIP.

Main caustic soda supplier countries

China is by far the largest producer, followed by the United States, the European Union (led by Germany, Belgium and the Netherlands), Japan, India, South Korea, Taiwan and Saudi Arabia. See Euro Chlor for European data.

Caustic soda in Turkey

Turkey produces chlor-alkali and also imports flakes and liquid, making Istanbul a practical hub. From Turkey, flakes travel by road to Iraq, the Caucasus and Central Asia, and by sea to the Middle East and North Africa.

Mercafons supplies all three forms from Turkey and can combine them with other chemicals in one shipment.

Caustic soda price per ton

The caustic soda price follows chlorine demand, energy cost, origin and form. Liquid is quoted per dry metric tonne (100 % NaOH); flakes and pearls per tonne of product. To compare, divide the liquid price per tonne of solution by its concentration. Request a quote with form, grade, quantity and destination.

Caustic soda packaging by form

Every package carries the class 8 label, UN number, lot number and net weight.

25 kg bags – Sodium Hydroxide (Caustic Soda) packaging | Mercafons
25 kg bagsFlakes and pearls: woven PP bags with PE liner; 40 bags per pallet.
1–1.5 t big bags – Sodium Hydroxide (Caustic Soda) packaging | Mercafons
1–1.5 t big bagsFlakes and pearls: lined 1,000 kg FIBC for bag-discharge stations.
1,000 L IBC – Sodium Hydroxide (Caustic Soda) packaging | Mercafons
1,000 L IBCLiquid 48–50 %: 1,000 L IBC, about 1,500 kg net.
ISO tank – Sodium Hydroxide (Caustic Soda) packaging | Mercafons
ISO tankLiquid 48–50 %: heated ISO tank, about 20–24 t.Photo: Gerd Fahrenhorst, CC BY 4.0, via Wikimedia Commons (brands blurred)

Shipment by form

Both ship under IMDG, ADR and RID with a dangerous-goods declaration. See logistics and our Incoterms guide.

Flakes / pearlsLiquid 48–50 %
UN numberUN 1823, sodium hydroxide, solidUN 1824, sodium hydroxide solution
Class / packing group8 / II8 / II
HS code2815.112815.12
20 ft containerabout 25–27 t in bagsIBCs, weight-limited, or one ISO tank
Winterno special measuresheated ISO tank or insulated storage

Storage and safety

Flakes and pearls

Keep bags closed, dry and off the floor, away from acids, aluminium and zinc; open bags absorb moisture and cake.

Liquid caustic soda

Carbon-steel tanks at moderate temperature, stainless or lined when hot; keep above 15 °C and bund the tank area.

Safety for all forms

Wear a face shield, alkali-resistant gloves and protective clothing. Add caustic slowly to water, never the reverse. For eye contact, rinse for 15 minutes and get medical help.

Caustic soda FAQ

Which form of caustic soda should I buy?

Liquid suits large users with tanks near a port or producer. Flakes suit most other industrial users and remote sites. Pearls suit automatic dosing and blending. Our engineers can compare landed cost per tonne of NaOH.

What is the difference between flakes and pearls?

Both are the same NaOH. Pearls flow freely and make less dust; flakes are cheaper and dissolve quickly.

Do flakes, pearls and liquid have different MSDS?

Yes. Flakes and pearls share one SDS for solid NaOH (UN 1823); liquid has its own (UN 1824), as its physical hazards and transport entry differ.

How do I dilute caustic soda safely?

Add it slowly to cold, stirred water in a heat-resistant vessel; never add water to solid caustic.

What is the shelf life of caustic soda?

Solids keep 2–3 years or more in closed bags; liquid keeps well in closed tanks above 15 °C.

Caustic soda documents: MSDS, TDS and CoA by form

An SDS must match the product as delivered, so documents are issued per form and grade; see technical documents.

Last reviewed: November 2026