What is LABSA?
LABSA (linear alkylbenzene sulphonic acid, dodecylbenzene sulphonic acid, CAS 27176-87-0 and 85536-14-7) is a brown, viscous liquid with about 96 % active acid. It is the raw material for LAS, the most widely used anionic surfactant in the world.
Detergent makers neutralise LABSA with caustic soda, soda ash or silicate inside their own process. LAS cleans well, foams moderately and is readily biodegradable.
Where is LABSA used?
LABSA is used by household- and industrial-detergent producers. In powders it is combined with STPP, sodium sulfate and sodium silicate; in dishwashing liquids it is paired with SLES.
How is LABSA produced?
LABSA is made from linear alkylbenzene (LAB) in a refinery-based chain.
- n-Paraffins from kerosene are dehydrogenated to linear olefins, which alkylate benzene to give LAB.
- LAB is sulphonated with SO₃ gas in a falling-film reactor.
- The acid is aged to complete the reaction and hydrated with a little water to stabilise it.
- Each lot is tested for active matter, free oil, free sulphuric acid and colour.
LABSA and LAS forms
The table compares the common forms; each is then explained with its typical uses.
| LABSA 96 % | Na-LAS paste | Na-LAS needles / powder | |
|---|---|---|---|
| Active matter | ≥ 96 % | about 60–70 % | about 80–90 % |
| Form | Brown acid liquid | Neutral paste | Dry solid |
| Handling | Corrosive acid | Non-corrosive | Dusty powder |
| Best for | Plants that neutralise | Liquid products | Dry blending |
LABSA 96 %
The standard acid form, neutralised on site.
- Spray-dried powders
- Dishwashing liquids
- All-purpose cleaners
Na-LAS paste
Pre-neutralised sodium salt for plants without a neutraliser.
- Liquid detergents
- Hand dishwashing
- Car-wash products
Na-LAS needles
Dry sodium LAS for powder blending without a spray tower.
- Dry-mix detergents
- Tablets
- Toilet cleaners
Typical analysis (LABSA 96 %)
| Parameter | Typical value |
|---|---|
| Active matter | ≥ 96 % |
| Free oil (unsulphonated) | ≤ 1.5 % |
| Free sulphuric acid | ≤ 1.5 % |
| Water | ≤ 1.0 % |
| Colour (5 % active, Klett) | ≤ 50 |
| Average molecular weight | about 318–322 |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Appearance | Brown, viscous liquid |
| Density at 20 °C | about 1.06 g/cm³ |
| Viscosity at 20 °C | about 1,000–2,000 mPa·s |
| Flash point | above 150 °C |
| Solubility | Dispersible in water; forms LAS on neutralisation |
Chemical properties
See PubChem for full data.
- It is a strong acid: about 0.13 kg of 100 % sodium hydroxide neutralises 1 kg of LABSA 96 %, with strong heat release.
- Neutralisation must be controlled to a slightly alkaline pH to avoid free acid in the finished product.
- The colour slowly darkens during storage, especially when warm.
- It is corrosive to skin and eyes and harmful if swallowed; it ships as UN 2586, Class 8, PG III.
LABSA applications
Laundry powders
Main surfactant in spray-dried and agglomerated washing powders.
Dishwashing liquids
Grease-cutting surfactant, usually with SLES for mildness and foam.
Cleaners
All-purpose, floor, toilet and industrial cleaners, including acid cleaners.
Industry
Emulsifiers for agrochemicals, textile auxiliaries and emulsion polymerisation.
Main LABSA supplier countries
LABSA is produced worldwide; large LAB and LABSA exporters include China, India, Saudi Arabia, Qatar, Spain and Brazil.
LABSA in Turkey
Turkey’s large detergent industry uses LABSA from local sulphonation plants and imports.
Mercafons supplies LABSA 96 % to Turkey and the region in drums, IBCs and ISO tanks, with documents for each lot.
LABSA price
The LABSA price follows benzene, kerosene-paraffin and sulphur costs, packaging and freight. Request a quote.
LABSA packaging
Packaging is acid-resistant, sealed and marked with UN number, lot and dates.



Shipment
LABSA ships as UN 2586, alkylsulphonic acids, liquid, Class 8, PG III. A 20 ft container holds about 17 t in drums or about 21 t in IBCs. See logistics. HS code: 3402.31.
Storage and safety
Storage
Store closed in stainless steel or HDPE at about 15–40 °C; avoid carbon steel and aluminium. It thickens in the cold. Shelf life is typically 12 months.
Safety
Wear acid-resistant gloves, goggles and a face shield. Rinse splashes with plenty of water and neutralise spills with soda ash.
LABSA FAQ
How much caustic soda do I need to neutralise LABSA?
About 0.13 kg of 100 % NaOH per kg of LABSA 96 %; check the final pH, as free sulphuric acid also takes caustic.
What is free oil?
Unsulphonated alkylbenzene; it does not clean and should be low, typically below 1.5 %.
Why has my LABSA become darker?
The colour darkens slowly with time and heat; it has little effect on detergent performance.
Is LAS biodegradable?
Yes, linear alkylbenzene sulphonate is readily biodegradable under aerobic conditions.
What is the difference between LABSA and SLES?
LABSA is an acid neutralised to LAS, mainly for laundry and dishwashing; SLES is milder and used in personal care.
LABSA documents: MSDS, TDS and CoA
Each form has its own specification. See technical documents.
LABSA 96 %
Acid form.
Na-LAS paste and needles
Neutralised forms.
Last reviewed: November 2026














