CH₃OHDrag to rotate
3D ball-and-stick model · CH₄OCOH
Industrial chemicals

Methanol

IMPCA reference spec, ≥ 99.85 %

CAS 67-56-1HS 2905.11
Product family
Chemicals
Forms
Standard grade
Packaging
200 L drums1,000 L IBCISO tank
Request TDS / MSDS

What is methanol?

Methanol, also called methyl alcohol, CH₃OH (CAS 67-56-1), is the simplest alcohol: a clear, colourless, volatile and flammable liquid that mixes fully with water. It is one of the world’s largest-volume basic chemicals.

Chemical-grade methanol is traded to the IMPCA reference specification at ≥ 99.85 wt % purity and ≤ 0.10 wt % water. It is toxic: swallowing small amounts can cause blindness or death.

Where is methanol used?

Methanol is a feedstock for formaldehyde, acetic acid, MTBE, olefins and solvents in refining and petrochemicals. In oil and gas it prevents gas hydrates in wells and pipelines, it is the alcohol used to make biodiesel, and in wastewater treatment it is a carbon source for denitrification.

How is methanol produced?

Methanol is made from synthesis gas (CO, CO₂ and H₂).

  • Syngas is produced by steam reforming of natural gas or, mainly in China, by coal gasification.
  • It reacts over a copper–zinc oxide catalyst at about 200–300 °C and 50–100 bar to form crude methanol.
  • Crude methanol is distilled to remove water, ethanol, acetone and other by-products to IMPCA quality.
  • Each cargo or batch is tested to IMPCA methods; bulk cargoes are usually certified by an independent inspector.

Methanol grades

The table compares the grades; each is then explained with its typical uses.

IMPCA referenceGrade AATechnical
Purity≥ 99.85 wt %≥ 99.85 wt %≥ 99 wt %
Water≤ 0.10 wt %≤ 0.10 wt %≤ 0.5 wt %
Ethanol≤ 50 mg/kg≤ 10 mg/kgnot specified
Best forFormaldehyde, acetic acid, MTBE, biodieselPharma, high-purity synthesisHydrate inhibition, denitrification, solvent

IMPCA reference grade

The global trade standard for chemical-grade methanol, set by the International Methanol Producers and Consumers Association.

Typical uses
  • Formaldehyde and urea-formaldehyde resins
  • Acetic acid and MTBE
  • Biodiesel transesterification
  • Methylamines and methyl esters

Grade AA

US Federal O-M-232 Grade AA, with tighter limits on ethanol and acetone, for the most sensitive uses.

Typical uses
  • Pharmaceutical synthesis
  • Fine chemicals and laboratory use
  • Electronics cleaning

Technical grade

Lower-purity methanol where trace impurities do not matter.

Typical uses
  • Gas-hydrate inhibition in wells and pipelines
  • Carbon source for wastewater denitrification
  • Antifreeze and general solvent

Typical analysis (IMPCA)

ParameterIMPCA limit
Purity (dry basis)≥ 99.85 wt %
Water≤ 0.100 wt %
Acetone≤ 30 mg/kg
Ethanol≤ 50 mg/kg
Permanganate time (15 °C)≥ 60 min
Colour (Pt-Co)≤ 5
Acidity (as acetic acid)≤ 30 mg/kg
Density (20 °C)0.791–0.793 g/cm³
Distillation range≤ 1.0 °C, including 64.6 ± 0.1 °C
Chloride / sulphur / iron≤ 0.5 / ≤ 0.5 / ≤ 0.1 mg/kg

Check the current IMPCA edition for the full list and test methods. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue
Molar mass32.04 g/mol
Boiling point64.7 °C
Melting point−97.6 °C
Flash point (closed cup)about 11 °C
Autoignition temperatureabout 464 °C
Explosive limits in airabout 6–36 vol %
Vapour pressure (20 °C)about 12.9 kPa
SolubilityMiscible with water and most organic solvents

Chemical properties

See PubChem for full data and toxicology.

  • Oxidises to formaldehyde, which is the basis of most methanol demand.
  • Reacts with carbon monoxide to acetic acid and with isobutylene to MTBE.
  • Burns with an almost invisible pale-blue flame.
  • Toxic by ingestion, skin contact and inhalation; it damages the optic nerve and central nervous system (H301, H311, H331, H370) and is highly flammable (H225).

Methanol applications

Formaldehyde and resins

About a quarter of world demand goes to formaldehyde for urea-, phenol- and melamine-formaldehyde resins used in wood panels and adhesives.

Acetic acid, MTBE and olefins

Methanol carbonylation gives acetic acid; with isobutylene it gives the fuel additive MTBE; methanol-to-olefins (MTO) plants make ethylene and propylene.

Gas-hydrate inhibition

Injected into wells and pipelines, methanol lowers the hydrate-formation temperature and prevents blockages. Our corrosion inhibitors are often dosed alongside.

Biodiesel

It reacts with vegetable oils over a caustic soda or methoxide catalyst to form methyl esters and glycerine.

Wastewater denitrification

Dosed at about 2.5–3 kg per kg of nitrate-nitrogen, it feeds bacteria that convert nitrate to nitrogen gas.

Main methanol supplier countries

China is the largest producer and consumer, mostly from coal. Major exporters include Trinidad and Tobago, Saudi Arabia, Oman, the United States, Malaysia, New Zealand and Egypt. Mercafons supplies only from origins that comply with applicable sanctions.

Methanol in Turkey

Turkey relies mainly on imported methanol. Its large wood-panel industry is a major consumer through formaldehyde resins, along with biodiesel, chemicals and solvents.

Mercafons supplies IMPCA-grade methanol to Turkey and the region in drums, IBCs and ISO tanks, with CoA and independent inspection on request.

Methanol price per ton

The methanol price follows regional benchmark contract and spot prices, natural-gas and coal costs, freight and dangerous-goods handling. Request a quote with volume, pack and destination.

Methanol packaging

All packaging is UN-approved for Class 3 liquids and marked with hazard labels.

200 L drums – Methanol packaging | Mercafons
200 L drums200 L steel drums, about 160 kg net.
1,000 L IBC – Methanol packaging | Mercafons
1,000 L IBC1,000 L UN IBCs, about 790 kg net.
ISO tank – Methanol packaging | Mercafons
ISO tank20–25 m³ ISO tanks, about 16–20 t, for regular users.Photo: Gerd Fahrenhorst, CC BY 4.0, via Wikimedia Commons (brands blurred)

Shipment

Methanol is UN 1230, Class 3 (subsidiary 6.1), packing group II. It must be kept away from oxidisers and ignition sources and is not allowed in flexitanks. A 20 ft container holds about 12–16 t in drums or IBCs. See logistics. HS code: 2905.11.

Storage and safety

Storage

Store in earthed carbon- or stainless-steel tanks with nitrogen blanket or floating roof, in a bunded, ventilated area. Avoid aluminium, zinc and galvanised parts and keep water out.

Safety

Use spark-free equipment and earthing. Wear chemical goggles, nitrile or butyl gloves and respiratory protection where vapours occur. Fight fires with alcohol-resistant foam; the flame may be invisible in daylight.

Methanol FAQ

What is the IMPCA specification?

The trade reference for chemical-grade methanol: ≥ 99.85 % purity, ≤ 0.10 % water and limits on acetone, ethanol and other impurities.

What is the difference between methanol and ethanol?

Methanol (CH₃OH) is toxic and made from syngas; ethanol (C₂H₅OH) is made by fermentation or from ethylene and can be food grade.

Why is methanol used in gas pipelines?

It lowers the temperature at which gas hydrates form, preventing ice-like blockages.

Can methanol be shipped in flexitanks?

No. It is a flammable, toxic dangerous good and travels in drums, IBCs, ISO tanks or tankers.

How long can methanol be stored?

Indefinitely in clean, sealed tanks; the main risk is water uptake and contamination.

Methanol documents: MSDS, TDS and CoA by grade

All grades share one SDS for methanol; the specification and CoA differ by grade. See technical documents.

Last reviewed: November 2026