What is aluminium sulphate (alum)?
Aluminium sulphate, commonly called alum, is Al₂(SO₄)₃ with water of crystallisation (CAS 10043-01-3). The commercial solid contains 16–17 % Al₂O₃ and is the oldest and most widely used coagulant in water treatment.
It is sold as iron-free and standard (low-iron) grades, in granular, kibbled or powder form, and regionally as liquid alum. Iron content and particle size decide where each grade fits.
Where is aluminium sulphate used?
Most alum is used in drinking-water and wastewater treatment and in paper mills. It is also used in textile dyeing, leather tanning, soil conditioning and some food and FMCG processes.
How is aluminium sulphate produced?
An aluminium source is reacted with sulphuric acid to form a concentrated aluminium sulphate solution.
- Iron-free grade uses pure aluminium hydroxide, so iron stays very low.
- Standard grade uses bauxite or clay, which leaves a little iron.
- The hot solution solidifies into slabs, which are crushed (kibbled), granulated or milled to powder and screened.
Aluminium sulphate grades and forms
The table compares grades and forms; each is then explained with its typical uses.
| Iron-free | Standard (low-iron) | Liquid alum | |
|---|---|---|---|
| Al₂O₃ | ≥ 17 % | 16–17 % | about 8 % |
| Fe₂O₃ | ≤ 0.005 % | ≤ 0.5 % | low |
| Forms | Granular, kibbled, powder | Granular, kibbled | Solution |
| Best for | Drinking water, paper, dyeing | Wastewater, industrial water | Large plants near producer |
Iron-free aluminium sulphate
White product with very low iron, so it adds no colour or stains. It is the grade for paper, textiles and drinking water.
- Drinking-water clarification
- Paper sizing and pH control
- Textile dyeing mordant
- Food and pharmaceutical processing
Standard (low-iron) aluminium sulphate
Lower-cost grade with a little iron, which is harmless or even useful in coagulation.
- Municipal wastewater
- Phosphorus removal
- Industrial and cooling water
- Swimming-pool clarification
Granular, kibbled and powder forms
Granular and kibbled grades flow well in dry feeders and dissolve steadily; powder dissolves fastest for small batch tanks.
- Dry feeders (granular)
- Solution tanks (kibbled)
- Small batch plants (powder)
Typical analysis
| Parameter | Iron-free | Standard |
|---|---|---|
| Al₂O₃ | ≥ 17.0 % | 16.0–17.0 % |
| Fe₂O₃ | ≤ 0.005 % | ≤ 0.5 % |
| Water-insoluble matter | ≤ 0.1 % | ≤ 0.5 % |
| pH (1 % solution) | ≥ 3.0 | ≥ 3.0 |
| As / Pb | ≤ 5 / ≤ 10 mg/kg | ≤ 5 / ≤ 10 mg/kg |
| Particle size (granular) | 0.5–3 mm | 0.5–3 mm |
Drinking-water grades are supplied to EN 878. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Appearance | White (iron-free) or off-white granules, lumps or powder |
| Formula (commercial) | Al₂(SO₄)₃·about 14 H₂O |
| Density | about 1.6–1.7 g/cm³ |
| Bulk density (granular) | about 0.9–1.1 t/m³ |
| Solubility | Readily soluble in water |
| pH (1 % solution) | about 3.0–3.5 |
Chemical properties
Aluminium sulphate is an acidic salt that hydrolyses in water. Full data is on PubChem.
- Forms aluminium hydroxide flocs that trap turbidity and colour.
- Consumes alkalinity: about 0.5 mg/L as CaCO₃ per mg/L of commercial alum.
- Works best at pH about 5.5–7.5.
- Precipitates phosphate as aluminium phosphate.
- Solutions are acidic and corrode carbon steel.
Aluminium sulphate uses
Drinking-water treatment
Alum removes turbidity, colour and organic matter before filtration. Typical doses are 10–60 mg/L, set by jar test.
Wastewater and phosphorus removal
It coagulates suspended solids and binds phosphate, often with anionic polyacrylamide to speed settling.
Paper making
Papermakers’ alum fixes rosin size to fibres and controls pH and retention on the paper machine.
Textiles and leather
It acts as a mordant that fixes dyes and as a tanning aid.
Other uses
Soil acidification for gardening, pool clarification and some concrete and fire-retardant formulations.
Main aluminium sulphate supplier countries
Aluminium sulphate is made in many countries, usually close to where it is used. China and India are large exporters; producers in Europe and the Middle East supply regional markets.
Aluminium sulphate in Turkey
In Turkey, alum is widely used by municipal water utilities, wastewater plants and paper mills, and supply comes from regional producers and imports.
Mercafons supplies iron-free and standard aluminium sulphate in granular and kibbled forms, with drinking-water grades tested for heavy metals.
Aluminium sulphate price per ton
The aluminium sulphate price depends on grade (iron-free costs more), Al₂O₃ content, form and freight. Compare offers per tonne of Al₂O₃. Request a quote.
Aluminium sulphate packaging
Bags are palletised, stretch-wrapped and marked with product, grade, lot number and net weight.



Shipment
Solid aluminium sulphate is not a dangerous good for transport. A 20 ft container usually takes 25–27 t, subject to road weight limits. See logistics. HS code: 2833.22.
Storage and safety
Storage
Store dry and covered; moisture causes caking. Solution tanks should be HDPE, FRP or lined steel.
Safety
Aluminium sulphate can cause serious eye damage (GHS H318). Wear goggles and gloves, avoid dust, and rinse eyes for at least 15 minutes after contact.
Aluminium sulphate FAQ
What is the difference between iron-free and standard alum?
Iron-free alum has almost no iron and is used where colour matters, such as paper and drinking water; standard alum is cheaper for wastewater.
Alum or PAC: which should I use?
Alum is cheaper per tonne. PAC works over a wider pH range, in cold water and with less sludge.
Why does alum lower pH?
It consumes alkalinity when it hydrolyses. In soft water, lime or soda ash may be needed.
Is alum the same as potassium alum?
No. Potassium alum is a double salt used in cosmetics; water-treatment alum is aluminium sulphate.
How should alum be dosed?
As a 5–20 % solution or by dry feeder. Our engineers can help with jar tests and dosing.
Aluminium sulphate documents: MSDS, TDS and CoA by grade
All solid grades are the same substance and share one SDS. TDS and CoA are issued per grade; see technical documents.
Iron-free grade
For paper, textiles and drinking water.
Standard grade
For wastewater and industry.
Last reviewed: November 2026














