What are polymer processing aids?
Polymer processing aids (PPAs) are additive masterbatches that make plastics easier to extrude. The classic type contains about 2–5 % fluoropolymer in a polyethylene carrier and is added at low levels to the main resin.
They eliminate melt fracture (sharkskin), reduce die build-up and lower extrusion pressure. Related additive masterbatches add slip, antiblock, antistatic or desiccant effects.
Where are processing aids used?
They are used by film, pipe and moulding converters running polyethylene and polypropylene, especially tough mLLDPE film and filled film with calcium carbonate masterbatch. Antistatic masterbatches are often based on glycerol monostearate.
How are processing aids produced?
Processing aids are made by compounding.
- The active additive, such as a fluoropolymer, a fluorine-free polymer or a slip agent, is selected for the target resin.
- It is dispersed at a controlled level, often with synergists, in a carrier such as LLDPE or PP.
- The blend is compounded in a twin-screw extruder and pelletised.
- Each lot is tested for active content, MFI, dispersion and moisture.
Processing-aid grades
The table compares the main types; each is then explained with its typical uses.
| Fluoropolymer PPA | PFAS-free PPA | Additive masterbatch | |
|---|---|---|---|
| Active | Fluoroelastomer, about 2–5 % | Fluorine-free polymer additive | Slip, antiblock, antistatic, desiccant |
| Main effect | Removes melt fracture, die build-up | Same, without fluorine | Film handling, static, moisture |
| Typical dosage | about 0.5–2 % masterbatch | about 1–3 % masterbatch | about 1–5 % masterbatch |
| Best for | LLDPE and mLLDPE film, pipe | Markets restricting PFAS | Packaging film, recycled resin |
Fluoropolymer PPA
The established, highly efficient processing aid for polyolefin extrusion.
- Blown and cast film
- Pipe and cable
- Blow moulding
PFAS-free PPA
Fluorine-free alternatives for brands and markets that restrict PFAS.
- Food-packaging film
- Hygiene film
- Export to restricting markets
Slip, antiblock, antistatic and desiccant
Masterbatches that solve film-handling and moisture problems.
- Easy-opening bags and liners
- Antistatic packaging
- Drying recycled or filled resin
Typical data (fluoropolymer PPA masterbatch)
| Parameter | Typical value |
|---|---|
| Active fluoropolymer | about 2–5 % |
| Carrier | LLDPE, MFI about 1–2 g/10 min |
| Start-up dosage | about 1–2 % masterbatch |
| Maintenance dosage | about 0.3–1 % masterbatch |
| Active level in product | about 100–600 mg/kg |
| Moisture | ≤ 0.1 % |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Form | Natural or white pellets of about 3–4 mm |
| Density | about 0.92–0.95 g/cm³ for PPA grades |
| Bulk density | about 0.5–0.6 t/m³ |
| Processing temperature | As for the base resin |
| Compatibility | PE and PP, by carrier |
How processing aids work
- The fluoropolymer migrates to the die wall and forms a thin, low-energy coating, so the melt slips instead of sticking and tearing.
- Abrasive fillers and antiblocks such as talc, silica or CaCO₃ can scrub this coating away, so filled film needs a higher dose.
- Some regions are restricting PFAS, including fluoropolymer processing aids, which is driving demand for PFAS-free grades.
- The products are not dangerous goods; avoid overheating fluoropolymer grades above about 400 °C.
Processing-aid applications
Blown and cast film
Removes sharkskin in LLDPE and mLLDPE film and allows higher output.
Pipe, cable and profiles
Reduces die drool and pressure and gives smoother surfaces.
Fibres and blow moulding
Fewer breaks in monofilament and better surfaces on bottles.
Film handling and recycling
Slip, antiblock, antistatic and desiccant masterbatches for packaging and recycled resin.
Main processing-aid supplier countries
Processing aids and additive masterbatches come mainly from the United States, Western Europe, China, India, South Korea and Turkey.
Processing aids in Turkey
Turkey has a large masterbatch industry; fluoropolymer and other active ingredients are mostly imported.
Mercafons supplies fluoropolymer and PFAS-free PPAs and additive masterbatches to Turkey and the region in 25 kg bags, with documents for each lot.
Processing-aid price
The processing-aid price depends on the active chemistry, active content, carrier and order size. Request a quote.
Processing-aid packaging
Packaging is sealed, moisture-proof and marked with grade, lot and production date.

Shipment
Processing aids are not dangerous goods and are often shipped with other polymers as part loads. A full 20 ft container holds about 16–18 t. See logistics. The HS code depends on composition and is confirmed per grade.
Storage and safety
Storage
Store sealed, dry and below about 40 °C. Shelf life is typically 12–24 months.
Safety
Low hazard. Ventilate extrusion areas and avoid overheating, as decomposing fluoropolymer can release corrosive fumes.
Processing-aid FAQ
What is melt fracture?
A rough, sharkskin surface on film or pipe caused by the melt sticking and slipping at the die exit.
How much PPA should I add?
Usually 1–2 % masterbatch at start-up to condition the die, then about 0.3–1 % to maintain it.
Why does the PPA stop working when I add filler?
Abrasive fillers and antiblocks remove the die coating; increase the PPA dose or use a filler-resistant grade.
Do you offer PFAS-free processing aids?
Yes, fluorine-free grades are available for markets and brands that restrict PFAS.
Can processing aids help with recycled resin?
Yes; PPAs reduce die build-up and desiccant masterbatch removes moisture that causes bubbles.
Processing-aid documents: MSDS, TDS and CoA by grade
Each grade has its own specification. See technical documents.
PPA masterbatches
Fluoropolymer and PFAS-free.
Additive masterbatches
Slip, antiblock, antistatic, desiccant.
Last reviewed: November 2026














