What is carboxymethyl cellulose (CMC)?
Carboxymethyl cellulose (CMC), usually sold as sodium CMC (CAS 9004-32-4), is a water-soluble polymer made from natural cellulose. It dissolves in hot or cold water to give a clear, viscous solution.
Two numbers define every CMC grade: the degree of substitution (DS), which controls solubility and salt tolerance, and the viscosity, which comes from the chain length. A third, purity, separates technical grades from refined food and pharmaceutical grades.
Where is CMC used?
CMC thickens, stabilises, binds and controls water loss. It is used in drilling fluids, food and personal care, detergents, paper coating, textile sizing and printing, ceramic glazes, mineral flotation in mining and battery electrode binders.
How is CMC produced?
Cellulose from wood pulp or cotton linters is treated with sodium hydroxide to make alkali cellulose, then etherified with sodium monochloroacetate in an alcohol slurry. This attaches carboxymethyl groups to the cellulose chain.
- Technical CMC keeps the by-products, sodium chloride and sodium glycolate, so its purity is about 55–75 %.
- Refined CMC is washed with aqueous alcohol to remove salts, reaching ≥ 98–99.5 % purity for food, pharmaceutical and battery use.
- The product is dried, milled and sieved to powder or granules, and blended to the target viscosity.
CMC grades
The table compares the main grade families; each is then explained with its typical uses.
| Drilling LV / HV | Industrial | Food (E466) | |
|---|---|---|---|
| Purity | Technical or semi-refined | 55–99 % by use | ≥ 99.5 % |
| Viscosity | LV: low · HV: high | Low to very high | Low to very high |
| Standard | API 13A (CMC-LVT / HVT) | Customer spec | EU 231/2012, FCC |
| Best for | Fluid-loss control, viscosity | Detergent, paper, textile, ceramics | Food, beverages, pharma |
Drilling grades: CMC-LV and CMC-HV
CMC-LV reduces filtrate with little increase in viscosity, so it suits heavy muds. CMC-HV adds viscosity and fluid-loss control in low-solids muds. Both work best in fresh or low-salt water below about 120 °C.
- Fluid-loss control in water-based mud
- Viscosity in low-solids and spud mud
- Workover and completion fluids
- Water-well drilling
Industrial grades
Technical CMC tailored to each process by DS, viscosity and purity.
- Anti-redeposition in detergents
- Paper coating and surface sizing
- Textile sizing and printing paste
- Ceramic glaze and body binder
- Flotation depressant for talc and gangue
Food and pharmaceutical grade (E466)
Refined CMC with ≥ 99.5 % purity and food-additive limits, in low to very high viscosity types.
- Ice cream and dairy desserts
- Beverages, sauces and bakery
- Toothpaste and personal care
- Tablet binder and pharmaceuticals
Typical analysis
| Parameter | CMC-LV (drilling) | CMC-HV (drilling) | Food grade |
|---|---|---|---|
| Degree of substitution | ≥ 0.8 | ≥ 0.8 | 0.6–0.95 |
| Purity (dry basis) | ≥ 65 % | ≥ 65 % | ≥ 99.5 % |
| 600 r/min reading (API test) | ≤ 90 (fresh water) | ≥ 30 (fresh, 40 g/L and saturated salt) | — |
| API filtrate | ≤ 10.0 mL | ≤ 10.0 mL | — |
| Moisture | ≤ 10 % | ≤ 10 % | ≤ 8 % |
| pH (1 % solution) | 6.5–9.0 | 6.5–9.0 | 6.0–8.5 |
Drilling limits follow API Specification 13A. The binding values are the ones in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Appearance | White to off-white powder or granules |
| Odour | Odourless |
| Bulk density | about 0.4–0.8 t/m³ |
| Solubility | Soluble in hot and cold water; insoluble in most organic solvents |
| Viscosity (2 % solution) | from about 10 to over 10,000 mPa·s, by grade |
Chemical properties
CMC is an anionic polyelectrolyte: each carboxymethyl group carries a negative charge in water.
- Higher DS gives better solubility and tolerance to salt and calcium.
- Viscosity falls in salt water and at high temperature; in drilling it is used below about 120 °C.
- Stable at pH 4–10; precipitates with aluminium, iron and other polyvalent ions.
- Biodegradable; mud systems may need a biocide against bacterial attack.
CMC uses
Drilling fluids
CMC forms a thin, tight filter cake and adds viscosity. In salty or hot wells, polyanionic cellulose (PAC) or xanthan gum is often preferred.
Food
As E466 it thickens and stabilises ice cream, sauces and drinks and prevents ice and sugar crystals.
Detergents
It keeps removed soil from settling back on fabric during washing.
Paper and textiles
It improves coating flow, surface strength and printing sharpness, and sizes yarn before weaving.
Ceramics and mining
It binds tile bodies and glazes, and depresses talc and gangue minerals in flotation.
Main CMC supplier countries
China is the largest producer and exporter of CMC. Finland, the Netherlands, Germany, the United States, Japan and India are also important producers, especially of refined grades.
CMC in Turkey
CMC is widely used in Turkey’s detergent, food, textile and ceramics industries, and Istanbul is a regional trading hub that holds stock of technical, drilling and food grades for the Middle East and Central Asia.
Mercafons supplies drilling CMC-LV/HV tested to API 13A, industrial grades matched to your process, and food-grade E466, with samples for lab trials.
CMC price per ton
The CMC price depends mostly on purity and viscosity: refined food grades cost several times more than technical grades. Request a quote with grade, viscosity, quantity and destination.
CMC packaging
Bags are palletised and shrink-wrapped, and marked with product, grade, lot number and net weight.

Shipment
CMC is not a dangerous good. Because of its low bulk density, a 20 ft container usually takes about 14–18 t on pallets. See logistics. HS code: 3912.31.
Storage and safety
Storage
Store in a cool, dry place in closed bags. CMC absorbs moisture and forms lumps; shelf life is usually 2–3 years.
Safety
CMC is not classified as hazardous. Fine dust can form explosive mixtures in air, so avoid dust clouds and ignition sources. Spills are very slippery when wet.
CMC FAQ
What is the difference between CMC-LV and CMC-HV?
Both control fluid loss. LV adds little viscosity and suits weighted muds; HV adds viscosity and suits low-solids muds.
What is the difference between CMC and PAC?
PAC is a higher-DS, purer cellulose ether with better salt and temperature tolerance. See PAC-LV / PAC-HV.
Is CMC safe in food?
Yes. Food-grade CMC is approved as E466 and used widely in dairy, bakery and beverages.
How do I dissolve CMC without lumps?
Add it slowly into strong agitation or pre-mix with sugar, salt or glycol. Our engineers can advise on mixing equipment.
What does degree of substitution mean?
It is the average number of carboxymethyl groups per glucose unit, usually 0.6–1.2. Higher DS improves salt tolerance.
CMC documents: MSDS, TDS and CoA by grade
Technical and refined CMC differ in composition, so each family has its own SDS. TDS and CoA are issued per grade; see technical documents.
Drilling grades (CMC-LV / CMC-HV)
Tested to API 13A.
Industrial grades
Matched to each process.
Food and pharmaceutical (E466)
Refined grade with its own documents.
Last reviewed: November 2026














