What is sodium hypochlorite?
Sodium hypochlorite (NaOCl), CAS 7681-52-9, is a pale yellow-green alkaline solution that releases active chlorine. Industrial grades contain 10–15 % available chlorine; household bleach is a diluted form.
It is the most widely used liquid chlorine disinfectant, because it is easier and safer to handle than chlorine gas. Its main limitation is stability: strength falls over time, especially when warm.
Where is sodium hypochlorite used?
Sodium hypochlorite disinfects drinking water, wastewater and swimming pools in water treatment, sanitises equipment in food and FMCG plants, and bleaches textiles and pulp. It is also used in cooling-water biocide programmes and for oxidising cyanide in mining effluents.
How is sodium hypochlorite produced?
Chlorine gas is absorbed into cooled, dilute caustic soda: Cl₂ + 2 NaOH → NaOCl + NaCl + H₂O. Most hypochlorite is made at or near chlor-alkali plants.
- Temperature is kept low during reaction to limit chlorate formation.
- A little excess caustic soda is left to keep pH high and the product stable.
- Low-strength hypochlorite (under 1 %) can also be made on site by electrolysis of brine.
Sodium hypochlorite grades
The table compares the grades; each is then explained with its typical uses.
| Industrial 12.5–15 % | Drinking-water grade | Low-strength 5–10 % | |
|---|---|---|---|
| Available chlorine | 125–150 g/L | 125–150 g/L | 50–100 g/L |
| Chlorate and bromate | Not specified | Low, to EN 901 | Low |
| Stability | Lower (more concentrated) | Controlled, fresh lots | Higher |
| Best for | Bleaching, cooling water, industry | Potable-water disinfection | Pools, sanitation, retail bleach |
Industrial grade 12.5–15 %
The most concentrated and economical form per kilogram of chlorine. It is dosed from tanks by pumps.
- Textile and pulp bleaching
- Cooling-tower biocide
- Wastewater disinfection
- Cyanide and odour oxidation
Drinking-water grade (EN 901)
Produced and shipped fresh, with low chlorate, bromate and heavy metals, for water intended for human consumption.
- Municipal drinking water
- Bottled-water and beverage plants
- Water tanks and networks
Low-strength 5–10 %
More stable and easier to handle, for smaller users and for diluting to retail bleach.
- Swimming pools
- Food-plant sanitation and CIP
- Hospitals and cleaning services
- Household bleach production
Typical analysis
| Parameter | Industrial 15 % | Drinking-water grade |
|---|---|---|
| Available chlorine | ≥ 150 g/L at dispatch | ≥ 125 g/L at dispatch |
| Free NaOH | 0.3–1.0 % | 0.3–1.0 % |
| Na₂CO₃ | ≤ 1.0 % | ≤ 0.5 % |
| Fe | ≤ 1 mg/L | ≤ 0.5 mg/L |
| Density at 20 °C | about 1.21–1.25 g/cm³ | about 1.20–1.23 g/cm³ |
| pH | 11–13 | 11–13 |
Strength is measured at dispatch and falls over time. Drinking-water grades are supplied to EN 901. The binding specification is in our offer and the CoA for each lot.
Physical properties
| Property | Value (12–15 % solution) |
|---|---|
| Appearance | Clear, pale yellow-green liquid |
| Odour | Chlorine-like |
| Density at 20 °C | about 1.20–1.25 g/cm³ |
| Freezing point | about −20 to −25 °C |
| Solubility | Miscible with water |
| pH | 11–13 |
Chemical properties
Hypochlorite is a strong oxidiser. Full data is on PubChem.
- Decomposes with heat, light and traces of nickel, copper or iron, forming chlorate and oxygen.
- Mixed with acids it releases toxic chlorine gas; with ammonia it forms chloramines.
- Its disinfecting power is highest at pH 6–7.5, where hypochlorous acid dominates.
- Corrosive to skin, eyes and most metals; very toxic to aquatic life.
Sodium hypochlorite uses
Drinking-water disinfection
It kills bacteria and viruses and keeps a chlorine residual in the network, typically 0.2–0.5 mg/L at the tap.
Wastewater and pools
It disinfects effluent before discharge and keeps pool water safe, together with pH control.
Food and beverage sanitation
Diluted solutions sanitise surfaces, equipment and CIP systems, and wash fruit and vegetables.
Bleaching
It bleaches cotton, textiles and pulp and is the base of household bleach.
Industrial oxidation
It controls biofouling in cooling water and destroys cyanide and sulphide in effluents.
Main sodium hypochlorite supplier countries
Because it loses strength over time, sodium hypochlorite is produced close to users in almost every industrial country, usually by chlor-alkali producers. International trade is mainly regional, by road.
Sodium hypochlorite in Turkey
Turkey produces sodium hypochlorite at chlor-alkali plants and at regional producers, and it is widely used by municipal water utilities, pools and the food industry. Fresh product can reach neighbouring countries by road within days.
Mercafons supplies 12.5–15 % hypochlorite and drinking-water grade from Turkey in jerrycans, IBCs and tankers, timed to keep strength at delivery.
Sodium hypochlorite price per ton
The sodium hypochlorite price depends on strength, grade, packaging and transport distance. Compare offers per kilogram of available chlorine delivered. Request a quote.
Sodium hypochlorite packaging
All packages have vented caps, because the product slowly releases oxygen, and carry the class 8 and environmental labels.



Shipment
Sodium hypochlorite solution ships as UN 1791, hypochlorite solution, class 8, packing group III, marked as environmentally hazardous. Keep transit short and cool; avoid long storage in hot containers. See logistics. HS code: 2828.90.
Storage and safety
Storage
Store in a cool, dark, ventilated place in HDPE, FRP or lined tanks. Use within weeks: warm storage can halve strength within a few months.
Incompatibilities
Never mix with acids, ammonia or organic materials, and keep away from metals that speed decomposition.
Safety
Corrosive and very toxic to aquatic life. Wear goggles or face shield, gloves and protective clothing; rinse spills with plenty of water.
Sodium hypochlorite FAQ
How long does sodium hypochlorite keep its strength?
Stored cool and dark, a 15 % solution keeps most of its strength for a few weeks; heat and sunlight speed up loss. Order in quantities you use within about a month.
What does "available chlorine" mean?
It expresses oxidising power as equivalent chlorine, usually in g/L. A 150 g/L solution is often called 15 %.
How much hypochlorite is needed for drinking water?
Usually 1–3 mg/L of chlorine, adjusted to keep a residual in the network. Our engineers can help.
Hypochlorite or calcium hypochlorite?
Calcium hypochlorite is a 65–70 % solid that keeps longer and suits remote sites; sodium hypochlorite is easier to dose.
Why must it never be mixed with acid?
Acids release chlorine gas, which is toxic. Keep separate storage and dosing for acids and hypochlorite.
Sodium hypochlorite documents: MSDS, TDS and CoA by grade
The SDS depends on concentration band; drinking-water grade adds certification. See technical documents.
Industrial 12.5–15 %
Concentrated solution.
Drinking-water grade
Fresh lots with low by-products.
Low-strength 5–10 %
Sanitation and pool grade.
Last reviewed: November 2026














