What is polyethylene?
Polyethylene (PE, CAS 9002-88-4) is the world’s most widely used plastic. It is a thermoplastic made by polymerising ethylene and is supplied as granules (pellets) in three main families: LDPE, LLDPE and HDPE.
Each family is offered in many grades defined by density and melt flow index (MFI), from soft, clear film to stiff bottles, caps and pressure pipes.
Where is polyethylene used?
Most polyethylene goes to packaging producers for film, bottles and closures. Converters often add calcium carbonate masterbatch and processing aids, and laminate PE film with polyurethane adhesives.
How is polyethylene produced?
Polyethylene is made from ethylene, produced by cracking ethane or naphtha.
- LDPE is made by free-radical polymerisation at very high pressure, about 1,000–3,000 bar, in tubular or autoclave reactors.
- LLDPE and HDPE are made at low pressure with Ziegler–Natta, chromium or metallocene catalysts in gas-phase, slurry or solution reactors.
- Comonomers such as butene, hexene or octene control density and toughness.
- The polymer is pelletised with antioxidants and, for film, slip and antiblock; each lot is tested for MFI and density.
Polyethylene grades
The table compares the three families; each is then explained with its typical uses.
| LDPE | LLDPE | HDPE | |
|---|---|---|---|
| Density | 0.915–0.935 g/cm³ | 0.915–0.940 g/cm³ | 0.941–0.965 g/cm³ |
| Key property | Clarity, easy processing | Toughness, puncture resistance | Stiffness, chemical resistance |
| Melting point | about 105–115 °C | about 120–125 °C | about 128–136 °C |
| Best for | Shrink and lamination film | Stretch and heavy-duty film | Bottles, caps, pipes |
LDPE
Branched, soft and clear; often blended with LLDPE in blown film.
- Shrink film
- Lamination and carrier film
- Extrusion coating
LLDPE and mLLDPE
Linear chains with comonomer; metallocene grades give the best toughness and sealing.
- Stretch and cling film
- FFS heavy-duty sacks
- Food packaging film
HDPE
Highly crystalline, stiff and resistant to chemicals.
- Blow-moulded bottles and jerrycans
- Injection caps and crates
- PE100 water and gas pipes
Typical grade data (LLDPE C4 film grade)
| Parameter | Typical value |
|---|---|
| MFI (190 °C / 2.16 kg) | about 1.0 g/10 min |
| Density | about 0.918 g/cm³ |
| Tensile strength at break (film) | about 35–45 MPa |
| Elongation at break (film) | above 600 % |
| Dart impact (25 µm film) | about 80–120 g |
| Additives | Antioxidant; slip and antiblock as specified |
Values differ by grade; the binding data are those in the producer TDS and the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Form | Granules of about 3–5 mm |
| Density | 0.91–0.97 g/cm³ |
| Bulk density of granules | about 0.5–0.6 t/m³ |
| Water absorption | below 0.01 % |
| Processing temperature | about 160–260 °C, by process |
Chemical properties
See PubChem for general data.
- As a saturated hydrocarbon it resists water, acids, alkalis, salts and most solvents at room temperature.
- It is degraded by UV light and heat, so outdoor and pipe grades contain stabilisers or carbon black.
- Its non-polar surface must be corona- or flame-treated before printing or laminating.
- It is not hazardous and not a dangerous good; it is combustible and fully recyclable (resin codes 2 and 4).
Polyethylene applications
Flexible packaging
Shrink, stretch, carrier, lamination and food film, and FFS sacks.
Rigid packaging
HDPE bottles for detergents, milk and chemicals, jerrycans and drums.
Closures and moulding
Caps, closures, crates, buckets and household goods.
Pipes and cables
PE100 pressure pipes for water and gas, irrigation and cable insulation.
Main polyethylene supplier countries
Major polyethylene exporters include Saudi Arabia, the UAE, Qatar, the United States, South Korea, Singapore and Western Europe.
Polyethylene in Turkey
Turkey is one of the largest polyethylene importers in the region; domestic production covers only a small share of its packaging, pipe and moulding demand.
Mercafons supplies LDPE, LLDPE and HDPE grades to Turkey and the region in 25 kg bags and big bags, with documents for each lot.
Polyethylene price
The polyethylene price follows ethylene and crude-oil costs, grade, origin and freight. Request a quote.
Polyethylene packaging
Bags are UV-protected, palletised and marked with grade, lot and production date.


Shipment
Polyethylene is not a dangerous good. A 40 ft container holds about 24–27 t and a 20 ft about 16–18 t of granules. See logistics. HS code: 3901 (3901.10 LDPE, 3901.20 HDPE, 3901.40 LLDPE).
Storage and safety
Storage
Store dry, covered and out of direct sunlight, below about 50 °C. Use film grades with slip additive within about 12 months.
Safety
Spilled pellets make floors slippery; molten polymer causes burns. Earth equipment, as fines can cause static and dust explosions.
Polyethylene FAQ
What is the difference between LDPE, LLDPE and HDPE?
LDPE is soft and clear, LLDPE is tougher and more puncture-resistant, and HDPE is stiff and chemical-resistant.
What does MFI mean?
Melt flow index shows how easily the melt flows; low MFI suits film and pipe, high MFI suits injection moulding.
What is mLLDPE?
LLDPE made with metallocene catalysts; it gives tougher, clearer film with better sealing.
Are your grades approved for food contact?
Most packaging grades comply with EU 10/2011 and FDA rules; declarations are supplied per grade.
Can you supply butene, hexene and octene LLDPE?
Yes; hexene and octene grades are tougher, butene grades are more economical.
Polyethylene documents: MSDS, TDS and CoA by grade
Each grade has its own data sheet. See technical documents.
Film grades
LDPE, LLDPE, mLLDPE.
Moulding and pipe grades
HDPE, PE100.
Last reviewed: November 2026














