What is calcium carbonate masterbatch?
Calcium carbonate filler masterbatch is a pelletised concentrate of about 70–80 % fine, surface-coated calcium carbonate (CaCO₃, CAS 471-34-1) in a polyethylene or polypropylene carrier, with dispersing agents.
Plastic converters add it to their resin to lower material cost, increase stiffness and opacity, improve printability and often raise output, because filled melts cool faster.
Where is filler masterbatch used?
It is used by packaging converters that process polyethylene film and polypropylene raffia, cups and sheet. It is often run together with processing aids for smoother extrusion.
How is filler masterbatch produced?
Filler masterbatch is made from high-purity marble or limestone.
- White marble or limestone is ground to a fine powder, typically about 2 µm median with a controlled top cut.
- The powder is coated with stearic acid so that it disperses in the non-polar polymer.
- It is compounded with the carrier resin and additives in a twin-screw extruder or internal mixer.
- The melt is pelletised and dried; each lot is tested for CaCO₃ content, moisture, MFI and dispersion.
Filler masterbatch grades
The table compares the common grades; each is then explained with its typical uses.
| PE film grade | PP raffia / moulding | Universal / high-load | |
|---|---|---|---|
| CaCO₃ content | about 75–80 % | about 70–80 % | about 80–85 % |
| Carrier | LLDPE / LDPE | PP homopolymer | PE or compatible blend |
| Typical dosage | 5–30 % | 10–30 % | 10–40 % |
| Best for | Bags and film | Woven sacks, cups, sheet | Pipes, profiles, injection |
PE film grade
Fine, low-moisture grade for thin blown film without holes.
- Shopping and T-shirt bags
- Garbage and mulch film
- Shrink and industrial film
PP raffia and moulding grade
PP-carrier grade that keeps tape strength and stiffness.
- Woven sacks and big bags
- Thermoformed cups and trays
- Nonwovens
Universal and high-load grades
Highly filled grades for rigid, thick-walled products.
- Pipes and profiles
- Injection-moulded goods
- Sheet and compounds
Typical analysis (PE film grade)
| Parameter | Typical value |
|---|---|
| CaCO₃ content (ash) | 75–80 % |
| CaCO₃ particle size, median | about 1.5–2.5 µm |
| CaCO₃ top cut | about 8–10 µm |
| Moisture | ≤ 0.10 % |
| MFI (190 °C / 5 kg) | about 2–8 g/10 min |
| Density | about 1.8–2.0 g/cm³ |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Form | White pellets of about 3–4 mm |
| Density | about 1.8–2.0 g/cm³ |
| Bulk density | about 1.1–1.3 t/m³ |
| CaCO₃ whiteness | about 95 % or higher |
| Processing temperature | As for the base resin |
Chemical properties
See PubChem for data on calcium carbonate.
- Calcium carbonate is inert in polyolefins and stable well above processing temperatures.
- The stearic-acid coating makes the filler hydrophobic and improves dispersion.
- Moisture or coarse particles cause holes, bubbles and die build-up in thin film, so moisture and top cut are tightly controlled.
- It is not hazardous and not a dangerous good; it reacts only with acids.
Filler masterbatch applications
Blown film
Carrier, garbage, mulch and industrial film, with cost savings and better printability.
Raffia and woven sacks
Tapes for sacks and big bags, where it reduces fibrillation and cost.
Thermoforming and injection
Cups, trays, buckets and caps with higher stiffness and shorter cycles.
Pipes and profiles
Drainage pipes, profiles and sheet with lower resin content.
Main filler masterbatch supplier countries
Large exporters of filler masterbatch include Vietnam, Turkey, India, China, Egypt and Malaysia, all close to high-quality marble or limestone.
Filler masterbatch in Turkey
Turkey has large white-marble resources and a strong filler-masterbatch industry serving its film, raffia and pipe converters.
Mercafons supplies PE and PP filler masterbatch to Turkey and the region in 25 kg bags and big bags, with documents for each lot.
Filler masterbatch price
The filler masterbatch price depends on CaCO₃ fineness, carrier resin, loading, packaging and freight. Request a quote.
Filler masterbatch packaging
Packaging is moisture-proof and marked with grade, lot and production date.


Shipment
Filler masterbatch is not a dangerous good. Its high density lets a 20 ft container carry about 25–27 t. Keep dry. See logistics. HS code: 3824.99; classification can vary with composition.
Storage and safety
Storage
Keep sealed, dry and out of sunlight. Shelf life is typically 12 months; if moisture is picked up, dry at about 70–80 °C for 2–3 hours before use.
Safety
Low hazard. Spilled pellets make floors slippery; molten polymer causes burns.
Filler masterbatch FAQ
How much filler masterbatch can I add?
Typically 5–30 % in film and 10–30 % in raffia; the limit depends on thickness and required strength.
Why do I get holes or bubbles in my film?
Usually from moisture or coarse particles; use a fine, dry grade and keep bags sealed.
Should I choose a PE or PP carrier?
Use a PE carrier for PE film and a PP carrier for PP raffia, cups and sheet.
Does filler reduce product strength?
High loadings reduce elongation and tear strength somewhat, but increase stiffness.
Do you have food-contact grades?
Yes, grades with compliant carriers and calcium carbonate are available with declarations.
Filler masterbatch documents: MSDS, TDS and CoA by grade
Each grade has its own specification. See technical documents.
PE film grades
75–80 % CaCO₃.
PP and universal grades
Raffia, moulding, pipe.
Last reviewed: November 2026














