PACFormulation
Formulated product: composition on the TDS
Industrial chemicals

Poly Aluminium Chloride (PAC)

Powder 28–31 % Al₂O₃ / liquid 10–18 %

CAS 1327-41-9HS 2827.32
Product family
Chemicals
Forms
PowderLiquid solution
Packaging
25 kg bags1–1.5 t big bags1,000 L IBC
Request TDS / MSDS

What is poly aluminium chloride (PAC)?

Poly aluminium chloride (PAC) is an inorganic polymer coagulant with the general formula [Al₂(OH)ₙCl₆₋ₙ]ₘ and CAS number 1327-41-9. It is sold as a yellow or white PAC powder with 28–31 % Al₂O₃ and as a liquid PAC with 10–18 % Al₂O₃.

Unlike alum, PAC is partly "pre-neutralised": its aluminium is already linked into charged polymer chains. As a result, it forms floc faster, works over a wider pH and temperature range, uses up less alkalinity and produces less sludge. That is why PAC for water treatment has replaced alum in many plants.

Where is PAC used?

PAC is used mainly in water and wastewater treatment: drinking water, industrial process water, effluent, swimming pools and pre-treatment before membranes. It is also used in paper mills, textile dye houses, refinery oily-water systems in refining, and utility water systems in food and FMCG plants.

How is PAC produced?

PAC is made by reacting an aluminium source, usually aluminium hydroxide or, for lower grades, bauxite or aluminium dross, with hydrochloric acid. The aluminium chloride solution is then partly neutralised with an alkali so that aluminium ions polymerise. The degree of neutralisation is called basicity. The solution is settled and filtered, and sold as liquid PAC.

For powder, the liquid is dried. Spray drying gives a fine, pale yellow or white powder with very low insolubles and is used for drinking water. Drum drying is cheaper and gives a darker yellow to brown product with more insolubles, used for wastewater.

PAC grades

Grades differ in Al₂O₃ content, basicity, drying method and impurity limits. The table compares them; each is then explained with its typical uses.

White PACYellow spray-driedDrum-driedLiquid PAC
Al₂O₃≥ 30 %28–31 %26–28 %10–18 %
Insolubles≤ 0.1 %≤ 0.5 %≤ 1.5 %≤ 0.1 %
Best forDrinking water, food, paperDrinking and industrial waterWastewaterPlants near the producer

White PAC (drinking water)

High-purity, spray-dried PAC from aluminium hydroxide with ≥ 30 % Al₂O₃ and very low iron. It is used where low residual colour and strict heavy-metal limits matter, such as drinking water, food utilities and paper.

Typical uses
  • Drinking water
  • Food and beverage utilities
  • Paper and white water

Yellow PAC powder 28–31 %

The most common grade. Spray-dried yellow PAC suits both drinking water and industrial water and offers the best balance of price and performance.

Typical uses
  • Municipal drinking water
  • Industrial process water
  • Swimming pools
  • RO pre-treatment

Drum-dried PAC 26–28 %

A lower-cost, darker grade with more insolubles. It suits industrial and municipal wastewater, where purity limits are less strict.

Typical uses
  • Municipal wastewater
  • Industrial effluent
  • Sludge conditioning

Liquid PAC 10–18 %

Ready to dose with no dissolving. It is economical close to the producer; for long distances, powder is usually cheaper per kilogram of Al₂O₃. High-basicity grades and aluminium chlorohydrate (ACH) are available on request.

Typical uses
  • Large plants with dosing tanks
  • Regional water utilities
  • Continuous dosing without dissolving

Typical analysis of PAC powder

ParameterYellow spray-driedWhite (drinking water)
Al₂O₃29–31 %≥ 30 %
Basicity70–85 %40–90 % (as specified)
Water-insoluble matter≤ 0.5 %≤ 0.1 %
pH (1 % solution)3.5–5.03.5–5.0
Fe≤ 1.0 %≤ 0.02 %
As / Pb≤ 2 / ≤ 10 mg/kg≤ 2 / ≤ 10 mg/kg
Cd / Hg / Cr⁶⁺≤ 2 / ≤ 0.1 / ≤ 5 mg/kg≤ 2 / ≤ 0.1 / ≤ 5 mg/kg

Typical values are a guide. The binding specification is the one in our offer and in the Certificate of Analysis for each lot. Drinking-water grades are offered against EN 883 or the national standard you name.

Physical properties

PropertyValue
AppearanceYellow, pale yellow or white powder; amber liquid
Bulk density (powder)about 0.6–0.9 g/cm³
Density (liquid, 20 °C)about 1.20–1.35 g/cm³
Solubilityfully soluble in water
pH (1 % solution)3.5–5.0
Hygroscopicitypowder absorbs moisture and cakes if left open

Chemical properties

PAC contains polynuclear aluminium species, mainly the Al₁₃ ion, which carry a high positive charge. They neutralise negatively charged colloids and form dense floc.

  • Effective at pH 5.0–9.0, wider than alum (about 6.0–7.5), and in cold water.
  • Consumes less alkalinity than alum, so it lowers pH less and needs less lime or caustic.
  • Lower residual aluminium in treated water when dosed correctly.
  • Its solutions are acidic and mildly corrosive to carbon steel.
  • Do not mix with strong alkalis, oxidisers or other coagulants in the same tank.

PAC uses

Drinking-water clarification

PAC removes turbidity, colour and organic matter ahead of sand filters. Typical doses are 5–50 mg/L, set by jar test.

Industrial and municipal wastewater

It removes suspended solids, phosphate, dyes and oil. It is often followed by a flocculant such as anionic polyacrylamide or cationic polyacrylamide for faster settling and better dewatering.

Pre-treatment before RO and filtration

It lowers turbidity and the silt density index (SDI) to protect ultrafiltration and reverse-osmosis membranes.

Paper and textiles

PAC is used for rosin sizing, retention and clarification of white water in paper mills, and for decolouring dye-house effluent.

Oily water and DAF

In refineries and food plants, PAC breaks emulsions in dissolved-air flotation units.

Main PAC supplier countries

China is the largest producer and exporter of poly aluminium chloride, especially spray-dried powder. India, Turkey, the European Union and the United States also produce PAC, mainly liquid grades for their home markets.

PAC in Turkey

Turkey has domestic PAC production, mainly liquid and powder for municipal and industrial water, and also imports powder from China. Istanbul gives fast road access to Iraq, the Caucasus and Central Asia, where demand for drinking-water coagulants is growing.

Mercafons supplies PAC powder and liquid from Turkey, and can combine it with flocculants, caustic soda or ferric chloride in one shipment.

Poly aluminium chloride price per ton

The PAC price depends mainly on Al₂O₃ content, drying method (spray or drum), colour and drinking-water certification. Liquid PAC is often compared on a price per tonne of Al₂O₃. We quote FOB, CFR or DAP; request a quote with grade, quantity and destination.

PAC packaging

Powder is packed in moisture-proof bags with a PE liner. Every package shows the product name, grade, lot number and net weight.

25 kg bags – Poly Aluminium Chloride (PAC) packaging | Mercafons
25 kg bagsWoven PP bags with PE liner; 40 bags per pallet, shrink-wrapped.
1–1.5 t big bags – Poly Aluminium Chloride (PAC) packaging | Mercafons
1–1.5 t big bagsLined 1,000 kg FIBC for plants with bag-discharge stations.
1,000 L IBC – Poly Aluminium Chloride (PAC) packaging | Mercafons
1,000 L IBC1,000 L IBC for liquid PAC, about 1,200–1,300 kg net.

Shipment

PAC powder is usually not regulated as a dangerous good. Some liquid PAC grades are shipped as UN 3264, class 8, packing group III; always check section 14 of the SDS for the exact grade. A 20 ft container takes about 20–25 t of bagged powder. We ship by sea and road from Turkey; see logistics. HS code: 2827.32.

Storage and safety

  • Store powder in closed bags in a dry, covered area; it is hygroscopic and cakes in humid air.
  • Liquid PAC: HDPE, FRP or rubber-lined tanks; avoid carbon steel and aluminium.
  • Shelf life is about 24 months for powder and 6–12 months for liquid, which can slowly hydrolyse.
  • PAC irritates the eyes and skin. Wear goggles, gloves and a dust mask when dissolving powder.
  • Prepare solutions of 5–10 % in clean water and use them within a few days.

Poly aluminium chloride FAQ

What is the difference between PAC and alum?

PAC is pre-polymerised, so it works over a wider pH range, in cold water and at lower doses than alum. It also lowers pH and alkalinity less and produces less sludge.

What is the right PAC dosage?

It depends on the raw water. Most plants dose 5–50 mg/L for drinking water and more for wastewater. Run a jar test; our engineers can help.

Is PAC safe for drinking water?

Yes, when the grade meets EN 883, NSF/ANSI 60 or the national standard, and it is dosed correctly. We supply drinking-water grades with the matching certificates.

What is the difference between yellow and white PAC?

White PAC is made from high-purity aluminium hydroxide and has very low iron. Yellow PAC contains a little iron and is cheaper; both can be spray-dried.

Should PAC be used with a polymer?

Often, yes. PAC coagulates; a polyacrylamide flocculant then builds larger, faster-settling flocs and improves sludge dewatering.

PAC documents: MSDS, TDS and CoA

Powder and liquid PAC have different physical hazards, so each has its own SDS. TDS and CoA are issued per grade; see technical documents.

Last reviewed: November 2026