PPDrag to rotate
Polymer segmentCH
Industrial chemicals

Polypropylene (PP)

Technical and industry grades

CAS 9003-07-0HS 3902.10
Product family
Chemicals
Forms
PelletsPowder
Packaging
25 kg bags1–1.5 t big bags
Request TDS / MSDS

What is polypropylene?

Polypropylene (PP, CAS 9003-07-0) is a thermoplastic made by polymerising propylene. It is the lightest common plastic, with a density of about 0.90 g/cm³, and combines stiffness with good heat and chemical resistance.

It is supplied as granules in three families: homopolymer, random copolymer and impact copolymer, each in grades defined mainly by melt flow index (MFI).

Where is polypropylene used?

Polypropylene serves packaging producers for BOPP film, caps, cups and woven sacks. BOPP is often printed with inks based on ethyl acetate and laminated with PU adhesives; raffia makers add calcium carbonate masterbatch.

How is polypropylene produced?

Polypropylene is made from propylene, produced by cracking, refinery units or propane dehydrogenation.

  • Propylene is polymerised with Ziegler–Natta or metallocene catalysts in bulk-loop or gas-phase reactors.
  • Random copolymers include about 1–7 % ethylene; impact copolymers add a rubbery ethylene–propylene phase in a second reactor.
  • Peroxide can be added during extrusion to raise MFI and narrow the molecular-weight distribution for fibres and thin-wall parts.
  • The polymer is pelletised with stabilisers and nucleators; each lot is tested for MFI, ash and mechanical properties.

Polypropylene grades

The table compares the three families; each is then explained with its typical uses.

HomopolymerRandom copolymerImpact copolymer
Key propertyStiffness, heat resistanceClarity, flexibilityToughness in the cold
Melting pointabout 160–165 °Cabout 140–150 °Cabout 162–165 °C
MFI range (230 °C / 2.16 kg)about 2–40 g/10 minabout 0.3–30 g/10 minabout 2–70 g/10 min
Best forBOPP, raffia, fibresClear packs, PPR pipeBuckets, crates, freezer packs

Homopolymer

Stiff, high-melting grade for film, tape and fibre.

Typical uses
  • BOPP and cast film
  • Raffia for woven sacks and big bags
  • Nonwovens and fibres

Random copolymer

Clearer and more flexible, with a lower sealing temperature.

Typical uses
  • Clear containers and caps
  • PPR hot- and cold-water pipes
  • Medical and housewares

Impact copolymer

Rubber-modified grade that resists cracking at low temperature.

Typical uses
  • Buckets and paint pails
  • Crates and pallets
  • Thin-wall and freezer packaging

Typical grade data (homopolymer, BOPP film)

ParameterTypical value
MFI (230 °C / 2.16 kg)about 3 g/10 min
Densityabout 0.90–0.91 g/cm³
Tensile strength at yieldabout 33–36 MPa
Flexural modulusabout 1,400–1,600 MPa
Xylene solublesabout 3–4 %
Ash≤ 0.03 %

Values differ by grade; the binding data are those in the producer TDS and the Certificate of Analysis for each lot.

Physical properties

PropertyValue
FormGranules of about 3–5 mm
Densityabout 0.90–0.91 g/cm³
Heat deflection (0.45 MPa)about 85–110 °C
Water absorptionbelow 0.01 %
Processing temperatureabout 200–280 °C

Chemical properties

See PubChem for general data.

  • It resists water, acids, alkalis and most solvents, and withstands hot filling, microwave heating and steam sterilisation.
  • It is more sensitive to oxidation and UV than polyethylene, so grades contain antioxidants and, for outdoor use, UV stabilisers.
  • Homopolymer becomes brittle near 0 °C; impact copolymers are used where cold toughness matters.
  • It is not hazardous and not a dangerous good; it is combustible and recyclable (resin code 5).

Polypropylene applications

Film

BOPP for snacks, labels and tapes, and cast PP for lamination and textiles.

Injection moulding

Caps, closures, thin-wall cups and tubs, houseware and automotive parts.

Raffia and fibres

Woven sacks, big bags, nonwoven hygiene fabrics and carpet yarn.

Pipes and sheet

PPR plumbing pipes, corrugated sheet and thermoformed trays.

Main polypropylene supplier countries

Major polypropylene exporters include Saudi Arabia, the UAE, South Korea, China, India, Singapore, Western Europe and the United States.

Polypropylene in Turkey

Turkey is a large polypropylene importer; domestic output covers only part of the demand from film, raffia, moulding and fibre producers.

Mercafons supplies homopolymer, random and impact copolymer grades to Turkey and the region in 25 kg bags and big bags, with documents for each lot.

Polypropylene price

The polypropylene price follows propylene and crude-oil costs, grade, origin and freight. Request a quote.

Polypropylene packaging

Bags are UV-protected, palletised and marked with grade, lot and production date.

25 kg bags – Polypropylene (PP) packaging | Mercafons
25 kg bags25 kg PE valve or FFS bags on shrink-wrapped pallets.
1–1.5 t big bags – Polypropylene (PP) packaging | Mercafons
1–1.5 t big bagsBig bags of about 1,000–1,250 kg.

Shipment

Polypropylene is not a dangerous good. A 40 ft container holds about 24–27 t and a 20 ft about 16–18 t of granules. See logistics. HS code: 3902.10 (homopolymer), 3902.30 (copolymers).

Storage and safety

Storage

Store dry, covered and out of direct sunlight, below about 50 °C. Use within about 12 months for best processing.

Safety

Spilled pellets make floors slippery; molten polymer causes burns. Earth conveying equipment to prevent static and dust ignition.

Polypropylene FAQ

Homopolymer, random or impact copolymer?

Homopolymer for stiffness and film, random for clarity and pipes, impact copolymer for toughness in the cold.

Which MFI do I need?

About 3 for BOPP and raffia, 10–25 for general injection and fibres, and 40 or more for thin-wall packaging.

What is the difference between PP and PE?

PP is stiffer and more heat-resistant; PE is tougher at low temperature and more flexible.

Is polypropylene microwave-safe?

Food-contact PP grades withstand microwave heating and hot filling; compliance is declared per grade.

Are your grades approved for food contact?

Most packaging grades comply with EU 10/2011 and FDA rules; declarations are supplied per grade.

Polypropylene documents: MSDS, TDS and CoA by grade

Each grade has its own data sheet. See technical documents.

Last reviewed: November 2026