What is sodium cyanide?
Sodium cyanide, NaCN (CAS 143-33-9), is a white solid, usually supplied as briquettes, that dissolves in water to form cyanide ions. It is the main lixiviant used to dissolve gold and silver from ores.
Sodium cyanide is highly toxic and a controlled product. Mercafons supplies it only to licensed mining operations with verified end-user documentation, through producers and transporters that follow the International Cyanide Management Code.
Where is sodium cyanide used?
Most sodium cyanide is used in gold and silver mining for leaching. Smaller volumes are used in electroplating and chemical synthesis. Read our guide to cyanide supply for how regulated supply works.
How is sodium cyanide produced?
Sodium cyanide is made in large, highly controlled chemical plants.
- Hydrogen cyanide is produced, mainly by the Andrussow process from methane, ammonia and air, or recovered from acrylonitrile production.
- It is neutralised with sodium hydroxide to give sodium cyanide solution.
- The solution is crystallised, dried and pressed into briquettes, or shipped as liquid.
- Each lot is tested for NaCN content and impurities and packed in sealed, purpose-built packaging.
Sodium cyanide forms
The table compares the forms supplied to mines; each is then explained with its typical uses.
| Solid briquettes | Liquid solution | |
|---|---|---|
| NaCN content | ≥ 98 % | about 30 % (stabilised with caustic) |
| Delivery | Sealed liner bags in wooden boxes or steel drums | Dedicated ISO tanks |
| Handling on site | Dissolved in a closed make-up system | Transferred directly to storage |
| Best for | Remote mines, long routes | Large mines with nearby supply |
Solid briquettes
The most common form for international trade: dense, low-dust briquettes in sealed packaging.
- Gold heap leaching
- Carbon-in-leach (CIL) and carbon-in-pulp (CIP) plants
- Silver leaching
Liquid solution
Delivered in dedicated tanks to mines with a regular supply route and a receiving station.
- Large CIL plants
- Mines near a producer
- Sites designed for liquid receipt
Typical analysis (briquettes)
| Parameter | Typical value |
|---|---|
| Appearance | White briquettes |
| NaCN | ≥ 98 % |
| Sodium hydroxide | ≤ 0.5 % |
| Sodium carbonate | ≤ 0.5 % |
| Moisture | ≤ 0.5 % |
| Insolubles | ≤ 0.05 % |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Molar mass | 49.01 g/mol |
| Melting point | about 564 °C |
| Density | about 1.6 g/cm³ |
| Solubility in water | Highly soluble |
| Odour | Faint bitter-almond odour in moist air |
Chemical properties
See PubChem for full data.
- In aerated, alkaline solution cyanide dissolves gold and silver as stable cyanide complexes.
- At low pH, or in contact with acids, it releases highly toxic hydrogen cyanide gas, so leach solutions are kept strongly alkaline with hydrated lime.
- Cyanide in tailings is destroyed before discharge, for example with hydrogen peroxide or the SO₂/air process using SMBS.
- Fatal if swallowed, in contact with skin or if inhaled (H300, H310, H330); contact with acids liberates very toxic gas (EUH032); very toxic to aquatic life (H410).
Sodium cyanide applications
Gold and silver leaching
Dilute cyanide solutions dissolve gold in heap leach pads or agitated tanks; gold is then recovered on activated carbon or by zinc precipitation.
Cyanide management on site
Mines run closed make-up systems, monitoring, emergency plans and detoxification under the Cyanide Code and local permits.
Other uses
Electroplating and chemical synthesis use smaller quantities under the same strict controls.
Main sodium cyanide supplier countries
Sodium cyanide is produced in a limited number of countries, including China, the United States, Australia, Germany, South Korea and Mexico. Many producers are signatories to the Cyanide Code.
Sodium cyanide in Turkey
Turkey’s gold mines use cyanide under environmental permits and the national regulations that govern its import, transport and use.
Mercafons handles enquiries from licensed mines in Turkey and the region, coordinating Code-certified producers, transport and documentation.
Sodium cyanide enquiries
Supply is case by case and requires company and end-user verification before any offer. Send an enquiry with your mining licence details.
Sodium cyanide packaging
All packaging is UN-approved, sealed and labelled, and follows the producer’s Cyanide Code procedures.


Shipment
Solid sodium cyanide is UN 1689, Class 6.1, packing group I. It moves only with Cyanide Code-certified transporters, security measures and emergency response arrangements, and is kept away from acids and food. See logistics. HS code: 2837.11.
Storage and safety
Storage
Store in a secure, dry, locked and ventilated store with restricted access, separate from acids, oxidisers and food, with inventory control.
Safety
Only trained personnel with the PPE, gas detection and emergency equipment set out in the site plan and the SDS may handle it.
Sodium cyanide FAQ
Who can buy sodium cyanide?
Only licensed industrial users, mainly mines, that pass company and end-user checks.
What is the International Cyanide Management Code?
A voluntary programme for the safe production, transport and use of cyanide in gold mining, with independent audits.
Why is lime used with cyanide?
Lime keeps pH high so cyanide stays in solution and toxic gas is not released.
How is sodium cyanide delivered?
As briquettes in sealed boxes or drums, or as liquid in dedicated tanks, with certified transporters.
How is cyanide destroyed after use?
By detoxification processes such as hydrogen peroxide or SO₂/air before tailings are stored or discharged.
Sodium cyanide documents
Documents are issued to verified customers. See technical documents.
Product documents
Briquettes and solution.
Compliance documents
Required for supply.
Last reviewed: November 2026











