Na₂SiO₃Drag to rotate
3D ball-and-stick modelNaOSi
Industrial chemicals

Sodium Silicate

Technical and industry grades

CAS 1344-09-8HS 2839.19
Product family
Chemicals
Forms
Liquid solutionSolidPowder
Packaging
25 kg bags1,000 L IBC
Request TDS / MSDS

What is sodium silicate?

Sodium silicate (water glass, CAS 1344-09-8) is a family of compounds of silica (SiO₂) and sodium oxide (Na₂O). It is sold mainly as a clear, viscous liquid and as sodium metasilicate granules (CAS 6834-92-0).

Grades are defined by the weight ratio SiO₂ : Na₂O. Neutral grades of about 3.2–3.4 are used as binders and in pulp, while alkaline grades and metasilicate are strong detergent builders.

Where is sodium silicate used?

Major users are detergent producers, who combine it with LABSA, STPP and sodium sulfate. It is also a flotation depressant in mining, a shale inhibitor in drilling fluids and a binder in paper, foundry and construction.

How is sodium silicate produced?

Sodium silicate is made by two main routes.

  • Furnace route: silica sand and soda ash are melted at about 1,300–1,400 °C to form glass lumps.
  • The lumps are dissolved in water with steam under pressure, then filtered to a clear liquid.
  • Hydrothermal route: sand reacts directly with caustic soda in an autoclave, mainly for alkaline grades.
  • Metasilicate is crystallised from silicate and caustic soda; each lot is tested for SiO₂, Na₂O and density.

Sodium silicate grades

The table compares the common grades; each is then explained with its typical uses.

Neutral liquidAlkaline liquidMetasilicate pentahydrate
SiO₂ : Na₂O weight ratio3.2–3.42.0–2.5about 1.0 (molar)
Solidsabout 35–38 %about 42–48 %Crystalline, about 42 % water
FormViscous liquidViscous liquidWhite granules
Best forBinders, pulp, flotationDetergents, cleanersIndustrial and dishwasher detergents

Neutral liquid (ratio 3.3)

The most common grade, with high silica and moderate alkalinity.

Typical uses
  • Cardboard and tube adhesives
  • Pulp bleaching and de-inking
  • Flotation and water treatment

Alkaline liquid (ratio 2.0–2.5)

Higher Na₂O for alkalinity and detergency.

Typical uses
  • Spray-dried detergents
  • Metal cleaners
  • Silicate drilling muds

Sodium metasilicate

Free-flowing granules with strong alkalinity and buffering.

Typical uses
  • Dishwasher detergents
  • Industrial cleaners
  • Textile scouring

Typical analysis (neutral liquid, ratio 3.3)

ParameterTypical value
SiO₂26.5–29.0 %
Na₂O8.0–8.8 %
Weight ratio SiO₂ : Na₂O3.2–3.4
Total solids35–38 %
Density at 20 °C1.37–1.40 g/cm³
Water-insoluble matter≤ 0.2 %

The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue
Appearance (liquid)Clear to slightly hazy, viscous
Viscosity (neutral liquid, 20 °C)about 100–400 mPa·s
pH (liquid)about 11–12.5
Metasilicate bulk densityabout 0.9–1.0 g/cm³
SolubilityLiquid miscible with water; metasilicate readily soluble

Chemical properties

See PubChem for full data.

  • Acids and carbon dioxide from air precipitate silica gel, which is why open containers form a skin.
  • It buffers alkalinity, softens water by binding calcium and magnesium, and leaves a protective film on metals and glazes.
  • On drying or with hardeners such as CO₂ or esters it sets into a hard, heat-resistant binder.
  • Neutral liquids are skin and eye irritants and usually not dangerous goods; metasilicate is corrosive (H314) and ships as UN 3253, Class 8, PG III.

Sodium silicate applications

Detergents

Builder, alkalinity source and corrosion inhibitor in powders and dishwasher detergents.

Pulp and paper

Stabiliser in peroxide bleaching, de-inking aid and adhesive for corrugated board and tubes.

Mining and drilling

Depressant and dispersant in flotation; shale inhibitor in silicate-based drilling muds.

Construction and foundry

Concrete hardener, soil stabiliser, acid-resistant cements and CO₂-hardened foundry cores.

Main sodium silicate supplier countries

Liquid silicate is expensive to ship far, so it is produced in most industrial countries; large producers include China, India, Western Europe, the United States and Turkey.

Sodium silicate in Turkey

Turkey has domestic sodium silicate production serving its detergent, paper, construction and ceramics industries.

Mercafons supplies liquid sodium silicate and metasilicate to Turkey and the region in IBCs and bags, with documents for each lot.

Sodium silicate price

The sodium silicate price depends on soda ash and energy costs, ratio, concentration, packaging and freight. Request a quote.

Sodium silicate packaging

Packaging is sealed against air and marked with grade, lot and dates. Regional bulk deliveries by road tanker are possible.

25 kg bags – Sodium Silicate packaging | Mercafons
25 kg bags25 kg PE-lined bags for metasilicate and powder grades.
1,000 L IBC – Sodium Silicate packaging | Mercafons
1,000 L IBCAbout 1,350–1,400 kg IBCs for liquid grades.

Shipment

Neutral liquid silicate is normally not a dangerous good; metasilicate ships as UN 3253, Class 8. A 20 ft container holds about 20–24 t in IBCs or about 25 t in bags. See logistics. HS code: 2839.19 (metasilicate 2839.11).

Storage and safety

Storage

Keep liquid tightly closed in steel or plastic, protected from frost; avoid aluminium and galvanised metal. Keep metasilicate dry. Shelf life is typically 12 months.

Safety

Alkaline: wear goggles and gloves. Wash spills away with water before they dry, as they become slippery and then hard.

Sodium silicate FAQ

What does the ratio mean?

It is the weight ratio of SiO₂ to Na₂O; a higher ratio means more silica and lower alkalinity.

Should I choose neutral or alkaline silicate?

Neutral ratio 3.2–3.4 suits binders, pulp and flotation; alkaline grades and metasilicate suit detergents and cleaners.

Why has my silicate formed a skin or gel?

It reacted with CO₂ from air or was mixed with acid; keep containers closed.

What is the difference between metasilicate and liquid silicate?

Metasilicate is a crystalline, more alkaline solid that dissolves quickly; liquid silicate is a solution with higher silica.

Why do detergents contain silicate?

It adds alkalinity, softens water and protects washing machines and dishware from corrosion.

Sodium silicate documents: MSDS, TDS and CoA by grade

Each grade has its own specification. See technical documents.

Last reviewed: November 2026