What is STPP?
STPP (sodium tripolyphosphate, Na₅P₃O₁₀, CAS 7758-29-4, food additive E451) is a white powder or granule with 94 % or more STPP in technical grade.
It is a strong sequestrant and dispersant: it binds calcium and magnesium, keeps dirt and clay particles apart and buffers pH. This makes it a classic detergent builder and a key additive in ceramics and food.
Where is STPP used?
STPP serves detergent and food producers, ceramic-tile plants and water treatment. In powders it is used with LABSA, sodium sulfate and sodium silicate; it is made from phosphoric acid and also thins clay-based drilling muds.
How is STPP produced?
STPP is made from phosphoric acid in three main steps.
- Purified phosphoric acid is neutralised with soda ash or caustic soda to an Na : P ratio of 5 : 3.
- The orthophosphate solution is spray-dried to a powder.
- The powder is calcined at about 300–550 °C, which condenses it to tripolyphosphate; higher temperatures give more Phase I.
- It is milled or granulated to the required density; each lot is tested for assay, P₂O₅, iron and whiteness.
STPP grades
The table compares the common grades; each is then explained with its typical uses.
| Technical, light | Technical, dense | Food grade (E451) | |
|---|---|---|---|
| Na₅P₃O₁₀ | ≥ 94 % | ≥ 94 % | ≥ 85–94 % |
| Bulk density | about 0.35–0.50 g/cm³ | about 0.80–1.00 g/cm³ | Powder or granular |
| Key limits | Whiteness, Fe | Whiteness, Fe | As, Pb, F, heavy metals |
| Best for | Spray-dried powders | Dry-mix, ceramics | Meat, seafood, dairy |
Technical, light density
Fluffy powder suited to slurry and spray-drying.
- Spray-dried laundry powders
- Industrial cleaners
- Paint dispersion
Technical, dense / granular
Dense, low-dust grade that blends without segregation.
- Dry-mix and dishwasher powders
- Ceramic tile bodies and glazes
- Water treatment
Food grade E451
High-purity grade with strict limits on arsenic, lead and fluoride.
- Meat and poultry brines
- Seafood and surimi
- Processed cheese
Typical analysis (technical grade 94 %)
| Parameter | Typical value |
|---|---|
| Na₅P₃O₁₀ | ≥ 94 % |
| P₂O₅ | ≥ 57.0 % |
| Iron (Fe) | ≤ 70 mg/kg |
| Water-insoluble matter | ≤ 0.10 % |
| Whiteness | ≥ 90 % |
| pH (1 % solution) | 9.2–10.0 |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Molar mass | 367.86 g/mol |
| Density | about 2.5 g/cm³ |
| Melting point | about 620 °C |
| Solubility in water | about 14–20 g/100 mL at 25 °C |
| Appearance | White powder or granules |
Chemical properties
See PubChem for full data.
- It forms soluble complexes with calcium and magnesium, softening water and preventing scale.
- It disperses clay and soil particles, which is why it lowers the viscosity of ceramic slips and drilling muds.
- Phase I hydrates faster and gives more heat when dissolved; Phase II dissolves more smoothly in slurries.
- In water it slowly hydrolyses to pyro- and orthophosphate, faster when hot or acidic. It is not a dangerous good.
STPP applications
Detergents
Builder in laundry powders, dishwasher detergents and industrial cleaners, where phosphates are allowed.
Ceramics
Deflocculant for tile bodies, slips and glazes, cutting water and drying energy.
Food
E451 for moisture retention in meat, poultry and seafood, and as an emulsifying salt in cheese.
Water and industry
Sequestrant in water treatment, dispersant in paints and thinner in drilling muds.
Main STPP supplier countries
China dominates world STPP output; other producers include India, Vietnam, Indonesia and several European countries.
STPP in Turkey
Turkey’s detergent, ceramic-tile and food industries use STPP, which is mainly imported.
Mercafons supplies technical and food-grade STPP to Turkey and the region in bags and big bags, with documents for each lot.
STPP price
The STPP price depends on phosphate rock, phosphoric acid, energy, grade, packaging and freight. Request a quote.
STPP packaging
Packaging is moisture-protected and marked with grade, lot and dates.


Shipment
STPP is not a dangerous good. A 20 ft container holds about 25 t of dense grade; light grades fill the volume first and load less. Keep dry. See logistics. HS code: 2835.31.
Storage and safety
Storage
Store dry and covered on pallets, as it absorbs moisture and cakes. Shelf life is typically 2 years.
Safety
Low hazard; dust can irritate eyes. Wear goggles and a dust mask when handling.
STPP FAQ
What is the difference between Phase I and Phase II?
They are two crystal forms; Phase I dissolves and hydrates faster, Phase II gives smoother slurries. We supply to your required Phase I range.
Light or dense STPP?
Light density suits spray-drying towers; dense or granular grades suit dry-mix powders and ceramics.
What is the difference between food and technical grade?
Food grade meets E451 and FCC limits on arsenic, lead, fluoride and heavy metals; technical grade is for industry.
Are phosphates banned in detergents?
The EU restricts them in consumer laundry and dishwasher detergents; many other markets and industrial uses still allow them.
Why is STPP used in ceramic tiles?
Small additions thin the clay slip, so less water is needed and drying costs fall.
STPP documents: MSDS, TDS and CoA by grade
Each grade has its own specification. See technical documents.
Technical grade
≥ 94 %, light or dense.
Food grade E451
Meat, seafood, dairy.
Last reviewed: November 2026














