What is potassium chloride?
Potassium chloride (KCl), CAS 7447-40-7, is a natural salt of potassium. In agriculture it is called muriate of potash (MOP) and it is the world’s main potassium fertiliser. Industry uses purer, white grades.
In drilling, KCl is valued because the potassium ion stops reactive shale from swelling. A few per cent of KCl in the mud keeps the hole stable, and clear KCl brines are used for completion and workover.
Where is potassium chloride used?
About 90 % of world potash goes into fertiliser. Technical KCl is used in oil and gas drilling and well completion, in chemical production (potassium hydroxide and carbonate), in water softeners, as a food salt substitute in FMCG and as a flux in metal refining.
How is potassium chloride produced?
KCl is mined from underground potash beds, mainly sylvinite (KCl with rock salt) and carnallite, or recovered by solution mining and from salt-lake brines.
- Flotation separates KCl from salt in crushed sylvinite. Traces of iron oxide give this product its red or pink colour.
- Hot leaching and crystallisation dissolve the ore and recrystallise pure white KCl with less sodium and insolubles.
- Crystals are dried and screened into fine, standard or granular sizes, or compacted into granules for fertiliser blending.
Potassium chloride grades
Grades differ in purity, colour and particle size. The table compares them; each is then explained with its typical uses.
| White technical | MOP fertiliser | Food / pharma | |
|---|---|---|---|
| KCl | ≥ 98–99 % | ≥ 95 % (60 % K₂O) | ≥ 99 % |
| Colour | White | Red, pink or white | White |
| Size | Fine or standard crystal | Standard or granular | Fine crystal |
| Best for | Drilling, brines, chemicals | Agriculture, blending | Food, pharmaceuticals |
White technical / drilling grade
High-purity crystal with low sodium and insolubles. It dissolves cleanly and gives a clear brine, so it is the grade for drilling fluids and chemical processes.
- KCl-polymer drilling muds
- Completion and workover brines
- Potassium hydroxide production
- Water-softener regeneration
MOP 60 % K₂O (red or white)
Muriate of potash in standard or granular sizes. Red MOP is cheaper; white soluble MOP (≥ 62 % K₂O) is used in fertigation and liquid fertilisers.
- Direct soil application
- NPK blending
- Fertigation (soluble grade)
Food and pharmaceutical grade (E508)
Purified KCl that meets food-additive and pharmacopoeia limits.
- Low-sodium salt blends
- Mineral fortification
- Oral rehydration and infusion products
Typical analysis
| Parameter | White technical | MOP 60 % | Food grade |
|---|---|---|---|
| KCl | ≥ 98.0 % | ≥ 95 % | ≥ 99.0 % |
| K₂O equivalent | ≥ 61.5 % | ≥ 60 % | ≥ 62 % |
| NaCl | ≤ 1.5 % | ≤ 3.5 % | ≤ 0.5 % |
| Water-insoluble matter | ≤ 0.1 % | ≤ 1.0 % | ≤ 0.05 % |
| Moisture | ≤ 0.5 % | ≤ 0.5 % | ≤ 0.5 % |
| Ca + Mg | ≤ 0.1 % | — | ≤ 0.05 % |
Typical values are a guide. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Appearance | White crystals; red or pink for flotation MOP |
| Molar mass | 74.55 g/mol |
| Density | 1.98 g/cm³ |
| Melting point | 770 °C |
| Solubility in water | about 340 g/L at 20 °C |
| Saturated brine density | about 1.16 SG (9.7 ppg) at 20 °C |
| Bulk density | about 1.0–1.2 t/m³ |
Chemical properties
KCl is a neutral, stable salt. A 5 % solution has a pH of about 7. Full data is on PubChem.
- Dissolves readily and fully dissociates into K⁺ and Cl⁻ ions.
- K⁺ fits between clay layers and reduces swelling and dispersion of shale.
- Chloride brines are corrosive to steel; corrosion inhibitors are used in completions.
- Slightly hygroscopic; fine grades can cake in humid storage.
Potassium chloride uses
Shale inhibition in drilling mud
Typically 3–10 % KCl is added to water-based polymer mud with PHPA, PAC and xanthan gum. The potassium ion limits shale swelling and keeps cuttings intact.
Completion and workover brines
Clear KCl brine up to about 1.16 SG controls well pressure without solids that could damage the reservoir.
Fertiliser
MOP is the main source of potassium for crops, used directly or in NPK blends.
Chemical industry
Electrolysis of KCl gives potassium hydroxide, the starting point for potassium carbonate and other salts.
Food and water treatment
Food-grade KCl replaces part of the sodium in salt; technical KCl regenerates water softeners.
Main potassium chloride supplier countries
Canada is the largest producer, followed by Russia, Belarus and China, then Germany, Israel, Jordan, Laos and Chile; see the USGS potash statistics.
Potassium chloride in Turkey
Turkey has no commercial potash mining, so all KCl is imported, mainly for fertiliser and, in smaller amounts, for drilling, food and industry. Istanbul traders hold stock of technical and fertiliser grades for re-export to the region.
Mercafons supplies white technical KCl for drilling and industry, and MOP for agriculture, with the grade confirmed by CoA before shipment.
Potassium chloride price per ton
The potassium chloride price follows the global potash market and depends on grade, colour, particle size and freight. White technical KCl costs more than red MOP. Request a quote with grade, quantity and destination.
Potassium chloride packaging
Bags are palletised, stretch-wrapped and marked with product, grade, lot number and net weight.



Shipment
Potassium chloride is not a dangerous good. A 20 ft container usually takes 25–27 t of bagged KCl, subject to road weight limits; MOP also moves in bulk vessels. See logistics. HS code: 3104.20.
Storage and safety
Storage
Store in a dry, covered area on pallets. Keep bags closed to prevent caking.
Safety
KCl is not classified as hazardous for handling. Dust can irritate eyes; use goggles and a dust mask when emptying bags. It is not for direct use as a medicine without medical control.
Potassium chloride FAQ
How much KCl is used in drilling mud?
Usually 3–10 % by weight, set by shale reactivity tests. Our engineers can help select the concentration.
Is red potash suitable for drilling?
It works, but iron oxide and insolubles add solids and colour. White technical KCl is preferred for clean muds and brines.
What density can a KCl brine reach?
About 1.16 SG (9.7 ppg) at saturation at 20 °C. Heavier brines use other salts such as calcium chloride.
What does 60 % K₂O mean?
It expresses potassium content as K₂O. Pure KCl equals about 63 % K₂O, so 60 % K₂O means about 95 % KCl.
Does KCl need special transport?
No. It is not a dangerous good and ships as general cargo.
Potassium chloride documents: MSDS, TDS and CoA by grade
KCl is not classified as hazardous, so one SDS covers all grades. Each grade has its own TDS or specification; see technical documents.
White technical / drilling grade
Purity and insolubles matter for clear brines.
MOP fertiliser grades
Specified by K₂O content and granulometry.
Food grade (E508)
Additional food-grade documents.
Last reviewed: November 2026














