BaSO₄Drag to rotate
3D ball-and-stick modelBaOS
Industrial chemicals

Barite (API 13A)

API 13A / ISO 13500 drilling grade

CAS 7727-43-7HS 2511.10
Product family
Chemicals
Forms
PowderLumps (crude ore)
Packaging
25 kg bags50 kg bags1–1.5 t big bagsBulk vessel
Request TDS / MSDS

What is barite?

Barite (also spelled baryte) is the natural mineral form of barium sulfate (BaSO₄), CAS 7727-43-7. It is heavy, soft and chemically inert, with a specific gravity of about 4.2–4.5. Ground to a fine powder, barite powder is the standard weighting material in drilling fluids, and around 90% of the barite sold worldwide is used by the oil and gas industry.

Because barite is practically insoluble in water and acids, it adds density without reacting with the polymers, clays and salts in a mud system. That makes drilling grade barite the first choice for controlling formation pressure.

Where is barite used?

Most barite goes into water-based and oil-based drilling muds and completion fluids in oil and gas drilling. Smaller volumes are used in heavyweight cement slurries, paints and coatings, plastics and rubber, brake linings, radiation-shielding concrete and as a raw material for barium chemicals.

How is barite produced?

Barite ore is mined in open pits or underground. Run-of-mine ore is crushed and upgraded by hand sorting, jigging, gravity separation or flotation to remove quartz, iron oxides and other gangue minerals. The concentrate is dried and ground in roller or ball mills to the particle size required by API 13A, then tested for density, particle size and soluble calcium before packing.

Barite grades

The table compares the grades; each is then explained with its typical uses.

API 13A 4.20API 13A 4.10LumpsIndustrial filler
Density≥ 4.20 g/cm³≥ 4.10 g/cm³4.1–4.2 (by contract)≥ 4.2 typical
FormPowder < 75 µmPowder < 75 µmCrude oreFine, high-white powder
Best forDeep, HPHT, narrow-margin wellsMost onshore and offshore wellsGrinding plantsPaints, plastics, brakes

API 13A barite 4.20 SG

The classic drilling grade with a minimum density of 4.20 g/cm³. It gives the lowest solids loading for high mud weights and is preferred for deep, high-pressure and narrow-margin wells.

Typical uses
  • Deep and HPHT wells
  • Narrow pressure windows
  • Kill-mud stock on rigs

API 13A barite 4.10 SG

Introduced by API in 2010 as high-grade ore became scarce. It meets every other API 13A limit and is the economical choice for most wells; slightly more solids are needed for the same mud weight. Read our guide: choosing between 4.20 and 4.10 SG.

Typical uses
  • Routine drilling programmes
  • Spud and intermediate sections
  • Cost-sensitive campaigns

Barite lumps (crude ore)

Unground ore of 4.2 or 4.1 SG for grinding plants, shipped in bulk. Density, BaSO₄ content and impurities are agreed per contract.

Typical uses
  • Grinding plants near the rig
  • Large bulk contracts

Industrial / filler grade

Finely ground, high-whiteness barite for paints, plastics, rubber and friction materials, available on request with a whiteness and fineness specification.

Typical uses
  • Paints and coatings
  • Plastics and rubber
  • Brake pads and friction materials
  • Radiation-shielding concrete

Typical analysis of drilling grade barite

ParameterAPI 13A requirementTypical (4.20 grade)
Density≥ 4.20 g/cm³ (≥ 4.10 for 4.1 grade)4.20–4.25 g/cm³
Water-soluble alkaline-earth metals (as Ca)≤ 250 mg/kg< 200 mg/kg
Residue > 75 µm≤ 3.0 %1.5–2.5 %
Particles < 6 µm≤ 30 %15–25 %
BaSO₄ content—≥ 90 %
Moisture—≤ 1.0 %
Mercury / cadmium—≤ 1 / ≤ 3 mg/kg on request

Typical values are indicative. The binding specification is the one in our offer and on the Certificate of Analysis for each lot. Requirements are from API Specification 13A.

Physical properties

PropertyValue
AppearanceWhite, grey or beige powder; lumps from white to brown
Specific gravity4.1–4.5 (pure BaSO₄ about 4.5)
Mohs hardness3–3.5 (soft, low abrasion)
Crystal systemOrthorhombic
Melting pointAbout 1,580 °C (decomposes above)
Solubility in waterPractically insoluble (about 2.5 mg/L at 25 °C)
Bulk density (powder)About 1.9–2.3 t/m³

Chemical properties

Barium sulfate is one of the most stable inorganic compounds. Its low solubility is what makes barite safe and predictable in drilling fluids.

  • Inert in water, brines, oil and most acids and alkalis at drilling temperatures.
  • Does not react with bentonite, polymers or other mud additives.
  • Natural barite can contain quartz, iron oxides and carbonates; soluble calcium is controlled under API 13A.
  • Reduced to barium sulfide only at very high temperature with carbon, which is how barium chemicals are made.

Applications of barite

Weighting agent for drilling mud

Barite raises mud density so the hydrostatic column balances formation pressure, prevents kicks and keeps the borehole stable. Used with bentonite, PAC and other additives.

Kill mud and well control

Heavy barite muds are pumped to regain control of a well after an influx. Many rigs keep barite on site as a well-control stock.

Cementing and spacers

Barite increases the density of cement slurries and spacers where a heavier slurry is needed.

Paints, plastics and rubber

As an inert, low-oil-absorption filler, finely ground barite improves gloss, density and chemical resistance.

Radiation shielding and heavy concrete

Barite aggregate gives concrete a higher density for X-ray rooms and counterweights.

Main barite supplier countries

According to the USGS Mineral Commodity Summaries 2026, the largest producers are India, China, Morocco, Kazakhstan, Mexico and Iran, followed by Türkiye, Laos and Russia. India has been the leading producer in recent years.

Barite in Turkey

Türkiye has barite reserves estimated by the USGS at about 34 million tonnes and produced around 260,000 tonnes in 2025. Deposits are found mainly in Antalya (Alanya), Kahramanmaraş, Muş, Giresun, Konya and Afyonkarahisar, with grinding plants serving drilling markets in the Middle East, the Caspian region and North Africa.

Mercafons supplies Turkish barite from Istanbul and Indian barite through our office in India, so you can compare origins on landed cost.

Barite price per ton

The barite price depends on SG grade (4.20 costs more than 4.10), packaging, origin and freight to your port. We quote per metric ton on FOB, CFR or DAP terms; request a quote with your grade, quantity and destination.

Barite packaging

All bags are palletised and shrink-wrapped or hooded for export, and marked with product, grade, lot number and net weight.

25 kg bags – Barite (API 13A) packaging | Mercafons
25 kg bagsWoven polypropylene or multiwall paper bags, 40 bags per pallet.
50 kg bags – Barite (API 13A) packaging | Mercafons
50 kg bagsWoven PP bags with inner liner, common for rig sites.
1–1.5 t big bags – Barite (API 13A) packaging | Mercafons
1–1.5 t big bagsFIBC with lifting loops and discharge spout, for bulk mixing plants.
Bulk vessel – Barite (API 13A) packaging | Mercafons
Bulk vesselBarite lumps or powder in bulk vessels for large volumes.Photo: Quintin Soloviev, CC BY 4.0, via Wikimedia Commons

Shipment

Barite is not classified as dangerous goods, so it ships without DG documentation. A 20-ft container usually carries about 25 tonnes of bagged barite, subject to road weight limits at destination. Lumps move by bulk vessel. We ship by sea, road and rail from Türkiye and India; see logistics and Incoterms. HS code: 2511.10.

Storage and safety

  • Store bags off the ground on pallets, covered and dry; wet bags cake and slow down mixing.
  • Barite is not hazardous under GHS, but avoid breathing dust: natural barite can contain crystalline silica. Use dust extraction and P2/N95 masks.
  • Wear safety glasses and gloves when handling large quantities.
  • Shelf life is unlimited when kept dry.

Frequently asked questions about barite

What is the difference between barite 4.2 and 4.1?

Only the minimum density. Both meet the same API 13A limits for particle size and soluble calcium. 4.20 SG gives fewer solids at a given mud weight; 4.10 SG is more economical for most wells.

How much barite is needed to raise mud weight?

A common field formula is: barite (lb/bbl) = 1,470 × (W2 − W1) ÷ (35 − W2), with mud weights in ppg. Our engineers can check the volumes for your system.

Is barite hazardous?

Barite is not classified as hazardous. The main precaution is dust control, because natural ore can contain crystalline silica. Details are in the MSDS.

What is the difference between barite and hematite?

Hematite has a higher specific gravity (about 5.0) and is used for very high mud weights, but it is harder and more abrasive than barite.

What is the minimum order quantity?

Bagged barite usually starts from one 20-ft container; bulk lumps from one vessel parcel. Samples are available for laboratory testing.

Barite documents: MSDS, TDS and CoA

Barite of all grades is the same mineral and shares one SDS. TDS and CoA differ by grade; API 13A results and independent inspection are available. See technical documentation.

Last reviewed: November 2026