PAADrag to rotate
3D ball-and-stick model · C₂H₄O₃COH
Industrial chemicals

Peracetic Acid

Technical and industry grades

CAS 79-21-0HS 2915.90
Product family
Chemicals
Forms
Standard grade
Packaging
20–30 L jerrycans1,000 L IBC
Request TDS / MSDS

What is peracetic acid?

Peracetic acid (PAA), also called peroxyacetic acid (CAS 79-21-0), is a powerful oxidising disinfectant. It is supplied as an equilibrium solution of peracetic acid, hydrogen peroxide, acetic acid and water, most often with 5 % or 15 % PAA.

It kills bacteria, yeasts, moulds and spores quickly, even at low temperature, and breaks down to acetic acid, water and oxygen. This makes it a common no-rinse sanitiser in food and beverage plants.

Where is peracetic acid used?

PAA is used in dairy, beverage, brewery and food plants as the final CIP sanitising step, after cleaning with caustic soda and nitric acid. It is also used for aseptic packaging, produce wash water and wastewater disinfection.

How is peracetic acid produced?

Peracetic acid is made by reacting acetic acid with hydrogen peroxide.

  • Acetic acid and hydrogen peroxide are mixed with a small amount of acid catalyst.
  • The mixture is held until it reaches equilibrium between peracetic acid, peroxide, acetic acid and water.
  • Stabilisers are added to limit decomposition during storage.
  • Each batch is tested for peracetic acid, hydrogen peroxide and stability.

Peracetic acid grades

The table compares the common grades; each is then explained with its typical uses.

PAA 5 %PAA 15 %
Peracetic acidabout 5 %about 15 %
Hydrogen peroxideabout 20–26 %about 14–23 %
OdourStrong vinegarStrong vinegar, pungent
Best forSurface and CIP sanitisingAseptic, large CIP, wastewater

PAA 5 %

Lower-strength grade, easier to handle and dose for general sanitising.

Typical uses
  • Food-contact surfaces
  • CIP final rinse sanitising
  • Bottle washers

PAA 15 %

Concentrated grade for automated systems and high-demand uses.

Typical uses
  • Aseptic filling sterilant
  • Large CIP systems
  • Wastewater disinfection

Typical analysis (PAA 15 %)

ParameterTypical value
Peracetic acid15 ± 1 %
Hydrogen peroxideabout 14–23 %
Acetic acidabout 16–28 %
Density at 20 °Cabout 1.12–1.15 g/cm³
pHbelow 1
AppearanceClear, colourless liquid

Composition varies by product; the binding specification is the one in our offer and the Certificate of Analysis.

Physical properties

PropertyValue
Molar mass (PAA)76.05 g/mol
AppearanceClear, colourless liquid
OdourPungent, vinegar-like
SolubilityMiscible with water
StabilitySlowly decomposes, releasing oxygen

Chemical properties

See PubChem for full data.

  • A strong oxidiser that destroys cell membranes and enzymes of microorganisms, effective at low temperature.
  • It decomposes to acetic acid, water and oxygen, leaving no harmful residues at use dilution.
  • Metals such as iron and copper, alkalis, reducing agents and heat speed up decomposition.
  • Organic peroxide: heating may cause a fire (H242); causes severe burns (H314); harmful by several routes; very toxic to aquatic life (H400).

Peracetic acid applications

CIP sanitising

Final no-rinse sanitising of tanks, pipelines and fillers at low use concentrations.

Aseptic packaging

Sterilising bottles, caps and cartons on aseptic fillers.

Food processing

Produce wash water, poultry processing water and food-contact surfaces, where permitted.

Water and other uses

Wastewater and cooling-water disinfection, and medical-device disinfection.

Main peracetic acid supplier countries

Peracetic acid is produced in Europe, the United States and China, and by regional producers close to their customers because it is best used fresh.

Peracetic acid in Turkey

Turkey’s dairy, beverage and food industries use PAA as a CIP sanitiser and aseptic sterilant.

Mercafons supplies 5 % and 15 % PAA to Turkey and the region in vented packaging. Users must apply products registered for their intended use under local biocide rules.

Peracetic acid price

The peracetic acid price depends on concentration, hydrogen peroxide and acetic acid costs, packaging and Class 5.2 freight. Request a quote.

Peracetic acid packaging

All packaging is UN-approved for organic peroxides and fitted with vented caps.

20–30 L jerrycans – Peracetic Acid packaging | Mercafons
20–30 L jerrycans20–25 kg vented HDPE jerrycans.
1,000 L IBC – Peracetic Acid packaging | Mercafons
1,000 L IBC1,000 L vented IBCs for large CIP systems.

Shipment

Peracetic acid ships as UN 3109, organic peroxide type F, liquid (peroxyacetic acid, stabilised), Class 5.2, with a corrosive subsidiary hazard. It must travel upright, cool and away from sunlight, combustibles and alkalis. See logistics. HS code: 2915.90.

Storage and safety

Storage

Store upright in original vented containers in a cool, shaded, ventilated area below about 30 °C, away from metals, alkalis and combustibles. Shelf life is typically 12 months.

Safety

Wear chemical goggles, face shield, acid-resistant gloves and protective clothing; use ventilation or respiratory protection against vapour.

Peracetic acid FAQ

Is peracetic acid a no-rinse sanitiser?

At approved use concentrations it is widely used without a final rinse; follow the product label and local rules.

5 % or 15 %?

5 % is easier to handle; 15 % suits automated dosing and high-demand uses.

Why must the containers be vented?

PAA slowly releases oxygen; vents prevent pressure build-up.

Is it a dangerous good?

Yes, it is UN 3109, Class 5.2 organic peroxide, with a corrosive subsidiary hazard.

Does it work in cold water?

Yes, it remains effective at low temperature, unlike many other sanitisers.

Peracetic acid documents: MSDS, TDS and CoA by grade

Each grade has its own SDS and label. See technical documents.

Last reviewed: November 2026