H₂O₂Drag to rotate
3D ball-and-stick modelHO
Industrial chemicals

Hydrogen Peroxide

35 % and 50 %; technical and food grade

CAS 7722-84-1HS 2847.00
Product family
Chemicals
Forms
35 %50 %
Packaging
20–30 L jerrycans200 L drums1,000 L IBC
Request TDS / MSDS

What is hydrogen peroxide?

Hydrogen peroxide, H₂O₂ (CAS 7722-84-1), is a clear, colourless liquid oxidant that breaks down into water and oxygen, leaving no salts or chlorinated by-products. That makes it one of the cleanest industrial oxidants.

It is supplied as stabilised aqueous solutions, most often 35 % and 50 % by weight, in technical, food/aseptic and drinking-water grades.

Where is hydrogen peroxide used?

Hydrogen peroxide is used in water and wastewater treatment for odour, sulphide and COD control and advanced oxidation, in food and beverage aseptic packaging and disinfection, in pulp, paper and textile bleaching, in mining for cyanide destruction, and in chemical synthesis.

How is hydrogen peroxide produced?

Almost all hydrogen peroxide is made by the anthraquinone (AO) process.

  • An alkyl-anthraquinone dissolved in organic solvent is hydrogenated over a catalyst.
  • The hydrogenated solution is oxidised with air, which forms H₂O₂ and regenerates the anthraquinone.
  • H₂O₂ is extracted with water, purified and concentrated by distillation, then stabilised.
  • Each lot is tested for concentration, free acid, non-volatile residue and stability.

Hydrogen peroxide grades

The table compares the grades; each is then explained with its typical uses.

Technical 35 %Technical 50 %Food / asepticDrinking water
H₂O₂35 %50 %35 % (also 50 %)35–50 %
StabiliserStandardStandardLow residue, food-compliantPer EN 902
TransportUN 2014, 5.1 (8)UN 2014, 5.1 (8)UN 2014, 5.1 (8)UN 2014, 5.1 (8)
Best forEffluent, bleaching, small sitesLarge plants, synthesisAseptic packaging, foodDrinking-water oxidation

Technical hydrogen peroxide 35 %

Easier and safer to handle on smaller sites; the most common grade for water treatment.

Typical uses
  • Wastewater odour and sulphide control
  • Textile bleaching
  • Cyanide destruction in tailings
  • Cooling-water biofouling control

Technical hydrogen peroxide 50 %

Less water to ship and store per tonne of active H₂O₂; requires stricter handling.

Typical uses
  • Pulp and paper bleaching
  • Chemical synthesis and epoxidation
  • Large Fenton and AOP plants

Food and aseptic grade

Low non-volatile residue and food-compliant stabilisers for direct and indirect food contact.

Typical uses
  • Aseptic sterilisation of cartons and PET bottles
  • Food-plant and CIP disinfection
  • Whey and starch processing

Drinking-water grade

Certified for treatment of water intended for human consumption.

Typical uses
  • Advanced oxidation with UV or ozone
  • Iron and manganese oxidation
  • Taste and odour control

Typical analysis

Parameter35 %50 %
H₂O₂35.0–36.0 %49.5–51.0 %
Active oxygenabout 16.5 %about 23.5 %
Free acid (as H₂SO₄)≤ 0.04 %≤ 0.04 %
Non-volatile residue≤ 0.08 % (food grade lower)≤ 0.08 % (food grade lower)
Stability (16 h, 96 °C)≥ 97 %≥ 97 %
AppearanceClear, colourless liquidClear, colourless liquid

Drinking-water grades are supplied to EN 902. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

Property35 %50 %
Density (20 °C)about 1.13 g/cm³about 1.20 g/cm³
Freezing pointabout −33 °Cabout −52 °C
Boiling pointabout 108 °Cabout 114 °C
pH (as supplied)about 1.5–4about 1–3
MiscibilityFully miscible with waterFully miscible with water

Chemical properties

Hydrogen peroxide is a strong oxidant. See PubChem for full data.

  • Decomposes to water and oxygen with heat release: 2 H₂O₂ → 2 H₂O + O₂. Iron, copper, manganese, dirt and alkalis speed this up.
  • With iron(II) it forms hydroxyl radicals (Fenton reaction); with UV or ozone it drives advanced oxidation.
  • Oxidises sulphide, cyanide, sulphite, phenols and many organics.
  • 35 % causes serious eye damage; 50 % is also corrosive to skin and an oxidiser that can ignite combustible materials.

Hydrogen peroxide applications

Wastewater and odour control

H₂O₂ oxidises hydrogen sulphide in sewers and plants, typically at about 1.5–3 parts per part of sulphide, and reduces COD; it can replace or supplement hypochlorite without forming chlorinated by-products.

Advanced oxidation (AOP) and Fenton

Combined with UV, ozone or iron(II), it destroys pesticides, pharmaceuticals and other persistent organics in drinking water and industrial effluent.

Aseptic packaging and food

Heated 35 % peroxide sterilises cartons, cups and PET bottles before filling; residues are limited by food-contact rules.

Pulp, paper and textiles

It bleaches pulp, recycled fibre, cotton and wool without chlorine.

Mining

It destroys cyanide in tailings and process water after sodium cyanide leaching.

Main hydrogen peroxide supplier countries

China is the largest producer of hydrogen peroxide. Other major producing countries include the United States, Germany, Belgium, South Korea and Thailand.

Hydrogen peroxide in Turkey

Turkey has domestic hydrogen peroxide capacity and also imports for textiles, pulp and paper, food and beverage, water treatment and mining.

Mercafons supplies 35 % and 50 % technical, food/aseptic and drinking-water grades through its Istanbul office, in vented UN-approved packaging with CoA for each lot.

Hydrogen peroxide price per ton

The hydrogen peroxide price depends on concentration, grade, packaging and dangerous-goods freight; compare price per tonne of 100 % H₂O₂. Request a quote.

Hydrogen peroxide packaging

All containers are UN-approved with vented caps so oxygen from slow decomposition can escape.

20–30 L jerrycans – Hydrogen Peroxide packaging | Mercafons
20–30 L jerrycans30–35 kg vented HDPE jerrycans.
200 L drums – Hydrogen Peroxide packaging | Mercafons
200 L drums200–250 kg vented HDPE drums.
1,000 L IBC – Hydrogen Peroxide packaging | Mercafons
1,000 L IBC1,000 L vented IBC totes, about 1,100–1,200 kg.

Shipment

Hydrogen peroxide 20–60 % is UN 2014, Class 5.1 (oxidiser) with subsidiary Class 8, packing group II. It must be segregated from flammables, organics and reducing agents and kept upright and shaded. A 20 ft container holds about 18–20 t in IBCs. See logistics. HS code: 2847.00.

Storage and safety

Storage

Store in the original vented containers or passivated stainless-steel, aluminium or HDPE tanks, cool and out of sun, away from combustibles, metals and alkalis. Never return unused product to the container. Shelf life is about 12 months.

Safety

Wear a face shield, goggles, PVC or nitrile gloves and protective clothing. Spills on wood, paper or cloth can ignite when dry; dilute spills with plenty of water.

Hydrogen peroxide FAQ

35 % or 50 % hydrogen peroxide: which should I buy?

50 % saves freight and storage per active tonne; 35 % is easier and safer to handle on smaller sites.

Why do hydrogen peroxide containers have vented caps?

H₂O₂ slowly releases oxygen; vents stop pressure build-up and container damage.

Is hydrogen peroxide safe for drinking water?

Yes, EN 902 grades are used at controlled doses, and residual peroxide is removed or broken down before supply.

Can hydrogen peroxide replace chlorine?

For oxidation and odour control often yes; for a lasting disinfectant residual in distribution, chlorine is still needed.

How do I dilute hydrogen peroxide?

Add peroxide to clean, demineralised water in clean equipment, never the reverse, and avoid contamination with metals.

Hydrogen peroxide documents: MSDS, TDS and CoA by grade

35 % and 50 % have separate SDS because their hazard classification differs; food and drinking-water grades add certificates. See technical documents.

Last reviewed: November 2026