What is nitric acid?
Nitric acid, HNO₃ (CAS 7697-37-2), is a strong mineral acid and oxidiser. It is supplied as aqueous solutions, most often 53 %, 60 % or 68 %.
In food and beverage plants it is the classic acid CIP step that removes milkstone, beerstone and mineral scale, and it passivates stainless steel. It is also a major industrial chemical for fertilisers, metal treatment and synthesis.
Where is nitric acid used?
In dairy, brewery and beverage plants nitric acid follows the alkaline caustic soda step in CIP, often alternating with phosphoric acid and sanitising with peracetic acid. It is supplied only to industrial users.
How is nitric acid produced?
Nitric acid is made from ammonia by the Ostwald process.
- Ammonia is oxidised with air over a platinum–rhodium catalyst to nitric oxide.
- Nitric oxide is further oxidised to nitrogen dioxide.
- Nitrogen dioxide is absorbed in water to give nitric acid of about 55–68 %.
- The acid is bleached of dissolved NOx and tested for strength, iron, chloride and residue.
Nitric acid grades
The table compares the common strengths; each is then explained with its typical uses.
| 53 % | 60 % | 68 % | |
|---|---|---|---|
| HNO₃ | about 53 % | about 58–60 % | about 65–68 % |
| Transport class | Class 8 | Class 8 | Class 8, oxidising |
| Handling | Easiest | Balanced | Strongest, fumes more |
| Best for | CIP blends | CIP, passivation | Industry, synthesis |
53 %
Lower strength for formulated CIP and cleaning products.
- Acid CIP detergents
- Dairy cleaning
- Descaling
60 %
A common strength for direct CIP dosing and metal treatment.
- CIP acid step
- Stainless-steel passivation
- Pickling
68 %
Near-azeotropic, highest standard strength.
- Chemical synthesis
- Fertiliser and nitrate production
- Etching
Typical analysis (60 %)
| Parameter | Typical value |
|---|---|
| HNO₃ | 59–61 % |
| Dissolved NO₂ | ≤ 0.1 % |
| Iron | ≤ 5 mg/kg |
| Chloride | ≤ 5 mg/kg |
| Residue on evaporation | ≤ 50 mg/kg |
| Appearance | Colourless to pale yellow |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Molar mass | 63.01 g/mol |
| Density (60 %) | about 1.37 g/cm³ |
| Density (68 %) | about 1.41 g/cm³ |
| Boiling point (68 % azeotrope) | about 121 °C |
| Odour | Sharp, acrid |
Chemical properties
See PubChem for full data.
- A strong acid and oxidiser that dissolves calcium phosphate and protein deposits and passivates stainless steel.
- It reacts with many metals, organic materials and reducing agents, releasing toxic nitrogen oxides.
- Light and heat slowly decompose it, turning it yellow.
- Corrosive to metals and causes severe burns (H290, H314); concentrated grades may intensify fire (H272) and fumes are toxic if inhaled.
Nitric acid applications
CIP cleaning
Dilute acid step, typically about 0.5–1.5 % at elevated temperature, after alkaline cleaning.
Passivation
Restores the passive layer on stainless-steel tanks, pipes and heat exchangers.
Metal treatment
Pickling, brightening and etching of metals.
Chemical industry
Production of nitrates, fertilisers and other chemicals.
Main nitric acid supplier countries
Nitric acid is produced in many countries, usually alongside ammonia and fertiliser plants, including Europe, China, the United States and Turkey.
Nitric acid in Turkey
Turkey produces nitric acid at fertiliser complexes and uses it in dairy and beverage CIP, metal finishing and chemicals.
Mercafons supplies 53–68 % nitric acid to industrial users in Turkey and the region, with end-use information and dangerous-goods documents. In many countries it is a reportable explosives precursor.
Nitric acid price
The nitric acid price follows ammonia and gas costs and depends on strength, packaging and Class 8 freight. Request a quote.
Nitric acid packaging
All packaging is UN-approved and nitric-acid resistant.


Shipment
Nitric acid ships as UN 2031, nitric acid, Class 8, packing group II; strengths of 65 % and above also carry an oxidising subsidiary hazard. Segregate it from alkalis, organics and flammables. See logistics. HS code: 2808.00.
Storage and safety
Storage
Store in a ventilated, bunded acid store, in stainless steel or HDPE, away from organics, metals, bases and sunlight.
Safety
Wear acid-resistant gloves, goggles, face shield and apron, with ventilation or respiratory protection against fumes.
Nitric acid FAQ
Which strength for CIP?
Usually 53 % or 60 %, diluted on site to about 0.5–1.5 %.
Why is nitric acid used after caustic in CIP?
Caustic removes fat and protein; nitric acid removes mineral deposits and passivates the steel.
Why has my nitric acid turned yellow?
Light or heat decompose it into nitrogen dioxide; store it cool and dark.
Is nitric acid a dangerous good?
Yes, it is UN 2031, Class 8.
Who can buy nitric acid?
Industrial users; we ask for end-use information as required by precursor rules.
Nitric acid documents: MSDS, TDS and CoA by strength
Each strength has its own SDS and specification. See technical documents.
53–60 %
CIP and passivation.
Last reviewed: November 2026














