What is an oxygen scavenger?
An oxygen scavenger is a reducing chemical that reacts with dissolved oxygen in water and removes it. Even small amounts of oxygen cause pitting corrosion in boilers, feedwater lines, condensate systems and water-injection pipelines.
The main types are catalysed sodium sulphite, bisulphite solutions, DEHA (diethylhydroxylamine) and carbohydrazide. They are used after mechanical deaeration to remove the last traces of oxygen.
Where are oxygen scavengers used?
Oxygen scavengers are used in steam boilers and condensate systems in refining, power and industry, in closed heating and cooling loops, in seawater and produced-water injection in oil and gas, and in pipeline hydrotest and preservation water.
How are oxygen scavengers produced?
Each scavenger has its own production route; products are then blended and stabilised.
- Sodium sulphite is made from sulphur dioxide and soda ash or caustic soda, then blended with a cobalt catalyst for fast reaction.
- Ammonium bisulphite is made by absorbing sulphur dioxide in ammonia solution.
- DEHA is made by oxidising diethylamine; carbohydrazide by reacting a carbonate ester or urea derivative with hydrazine.
- Each lot is tested for active content, pH, density and appearance.
Oxygen scavenger types
The table compares the main types; each is then explained with its typical uses. The choice depends on pressure, temperature and whether the steam contacts food.
| Catalysed sulphite | Bisulphite solutions | DEHA | Carbohydrazide | |
|---|---|---|---|---|
| Ratio to O₂ (theory) | about 7.9 : 1 (Na₂SO₃) | about 6–6.5 : 1 | about 1.24 : 1 | about 1.4 : 1 |
| Volatile | No (adds solids) | No (adds solids) | Yes | Partly (low solids) |
| Pressure range | Low to medium | Ambient water | Low to high | Medium to high |
| Best for | Low-pressure boilers | Water injection, hydrotest | Boilers and condensate | High-pressure boilers, layup |
Catalysed sodium sulphite
Fast, low-cost scavenger with a cobalt catalyst. It adds dissolved solids, so it suits low- and medium-pressure boilers.
- Fire-tube and low-pressure boilers
- Hot-water and closed loops
- Food plants where sulphite is permitted
Ammonium and sodium bisulphite
Liquid sulphite solutions for cold water, where they react quickly with oxygen.
- Seawater injection
- Pipeline hydrotest and preservation
- Dechlorination with SMBS as dry alternative
DEHA (diethylhydroxylamine)
Volatile scavenger that travels with steam, passivates steel and protects condensate lines.
- Industrial and utility boilers
- Condensate-return protection
- Boiler wet layup
Carbohydrazide
Low-solids hydrazine alternative that also passivates metal surfaces.
- High-pressure boilers
- Power-plant feedwater
- Long-term layup
Typical product properties
| Parameter | Catalysed sulphite | Ammonium bisulphite | DEHA blend | Carbohydrazide |
|---|---|---|---|---|
| Form | Powder or liquid | Liquid, about 60–70 % | Liquid, 15–85 % DEHA | Liquid, about 6.5–15 % |
| pH (as supplied) | about 8–10 (liquid) | about 4.5–5.5 | about 10–11 | about 7–9 |
| Density (20 °C) | per product | about 1.35–1.40 g/cm³ | about 0.9–1.0 g/cm³ | about 1.0–1.05 g/cm³ |
| Feed point | Deaerator storage | Injection line | Deaerator or feedwater | Deaerator or feedwater |
Each product has its own TDS. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Appearance | Clear to pale liquids, or white powder (sulphite) |
| Solubility | Fully soluble or miscible with water |
| Air sensitivity | React with air; keep containers closed |
| Materials | HDPE or stainless steel for storage and dosing |
| Shelf life | about 12 months in closed containers |
Chemical properties
See PubChem for sodium sulphite and the SDS of each product for blends.
- Sulphite: 2 SO₃²⁻ + O₂ → 2 SO₄²⁻; cobalt catalyses the reaction in cold water.
- DEHA and carbohydrazide reduce oxygen and convert red haematite to protective black magnetite.
- Sulphite is limited at high pressure because it can break down to SO₂ and H₂S.
- Bisulphites release SO₂ with acids (EUH031); DEHA blends can be flammable; some products are harmful if swallowed or irritating.
Oxygen scavenger applications
Steam boilers
Dosed into the deaerator storage section, scavengers remove residual oxygen. They work with boiler water treatment programmes that also control scale and pH.
Condensate systems
Volatile DEHA and neutralising amines protect return lines from oxygen and CO₂ attack, together with corrosion inhibitors.
Water injection
Bisulphite removes oxygen from seawater before injection into reservoirs, preventing pipeline and well corrosion.
Hydrotest and layup
Treated water protects new pipelines and idle boilers from corrosion during testing and storage.
Food and beverage plants
Some scavengers and amines are approved for steam in contact with food, for example under US 21 CFR 173.310.
Main oxygen scavenger supplier countries
Sodium sulphite and bisulphites are produced widely, with China a major exporter; DEHA and carbohydrazide come mainly from China, Europe and the United States. Formulated products are made by water-treatment companies worldwide.
Oxygen scavengers in Turkey
Turkey’s refineries, power plants, food plants and industrial boilers use oxygen scavengers, supplied by international and local water-treatment companies.
Mercafons supplies catalysed sulphite, bisulphite, DEHA and carbohydrazide products through its Istanbul office, with CoA for each lot.
Oxygen scavenger price
The oxygen scavenger price depends on chemistry and active content; compare cost per kg of oxygen removed, not price per kg of product. Request a quote with feedwater data.
Oxygen scavenger packaging
Packages carry product name, lot number, net weight and hazard labels where applicable.



Shipment
Classification depends on the product: catalysed sulphite is often not regulated, bisulphite solutions may be UN 2693, Class 8, and DEHA blends may be flammable or corrosive. Check the SDS of the product supplied. See logistics. HS code: 3824.99 for formulated products.
Storage and safety
Storage
Keep containers tightly closed, cool and out of sun, and protect liquids from frost. Store away from acids and oxidisers.
Safety
Wear chemical goggles and gloves. Keep bisulphites away from acids to avoid SO₂ release. Follow the SDS of the product supplied.
Oxygen scavenger FAQ
Which oxygen scavenger is best for my boiler?
Catalysed sulphite suits low-pressure boilers; DEHA or carbohydrazide suit higher pressures and condensate protection. Our engineers can advise.
What can replace hydrazine?
Carbohydrazide and DEHA are common, less hazardous alternatives.
How much sulphite do I need?
About 8 mg sodium sulphite per mg of oxygen in theory, plus a residual of typically 20–40 mg/L in low-pressure boilers.
Why use a scavenger if I have a deaerator?
A deaerator removes most oxygen; the scavenger removes the last traces and covers upsets.
Are oxygen scavengers dangerous goods?
Some are; it depends on chemistry and concentration.
Oxygen scavenger documents: MSDS, TDS and CoA by type
Each scavenger type has its own SDS and TDS because the chemistry differs. See technical documents.
Catalysed sulphite and bisulphite
Non-volatile scavengers.
DEHA and carbohydrazide
Volatile and low-solids scavengers.
Last reviewed: November 2026














