BWTFormulation
Formulated product: composition on the TDS
Industrial chemicals

Boiler Water Treatment Chemicals

Phosphate, polymer and amine programmes

HS 3824.99
Product family
Chemicals
Forms
Standard grade
Packaging
20–30 L jerrycans200 L drums1,000 L IBC
Request TDS / MSDS

What is boiler water treatment?

Boiler water treatment is the programme of chemicals that keeps a steam boiler free of scale, corrosion and carryover. Even after softening or demineralisation, feedwater carries traces of hardness, silica, oxygen and CO₂ that concentrate as water boils.

A programme usually combines an internal treatment (phosphate, polymer or chelant), an oxygen scavenger, alkalinity control and condensate amines. Products are formulated blends; each has its own SDS.

Where is boiler water treatment used?

Boiler chemicals are used in steam boilers in refineries and petrochemical plants, power plants and heat-recovery steam generators, food and beverage plants in FMCG, hospitals, laundries and any industry that raises steam.

How are boiler chemicals produced?

Boiler chemicals are formulated from well-defined actives.

  • Phosphates (such as trisodium phosphate), caustic soda, polymers (polyacrylates, polymethacrylates) and chelants (EDTA, NTA) are blended in water.
  • Condensate products blend neutralising amines (morpholine, cyclohexylamine, DEAE) or filming amines.
  • Products are formulated for pressure range and feedwater quality, and some are approved for steam that contacts food.
  • Each lot is tested for active content, pH, density and appearance.

Boiler treatment programmes

The table compares the main programmes; each is then explained with its typical uses. The programme is set by boiler pressure, feedwater quality and steam use.

PhosphatePolymer / chelantAll-volatile (AVT)Condensate amines
ChemistrySodium phosphates + causticPolyacrylates, chelantsAmmonia or amines onlyNeutralising or filming amines
Pressure rangeLow to highLow to mediumHigh (demineralised feed)All
Main controlHardness, pHHardness, iron, sludgepH, oxygenCondensate pH and iron
Best forIndustrial boilersClean heat-transfer surfacesUtility and HRSG boilersSteam and return lines

Phosphate programmes

Phosphate reacts with residual calcium to form a soft sludge removed by blowdown, and buffers boiler-water pH.

Typical uses
  • Fire-tube and packaged boilers
  • Industrial water-tube boilers
  • Refinery and chemical-plant steam

Polymer and chelant programmes

Polymers disperse sludge and iron; chelants keep hardness in solution, giving cleaner tubes when fed correctly.

Typical uses
  • Boilers on softened feedwater
  • Plants with iron pick-up from condensate
  • Low-sludge operation

All-volatile treatment (AVT)

Only volatile chemicals are used, so no solids are added; it needs very pure feedwater.

Typical uses
  • High-pressure utility boilers
  • Combined-cycle HRSGs
  • Once-through boilers

Condensate amines

Amines travel with steam and protect return lines from CO₂ and oxygen corrosion.

Typical uses
  • Long condensate return systems
  • Steam-heated process equipment
  • Food plants with approved amines

Typical product properties

ParameterPhosphate / polymer blendCondensate amine
AppearanceClear to slightly hazy liquidClear, colourless to yellow liquid
pH (1 % solution)about 11–13about 10–12
Density (20 °C)about 1.1–1.3 g/cm³about 0.95–1.0 g/cm³
Freezing pointabout −5 to −10 °Cper product
DosingFeedwater or boiler drumSteam header or feedwater

Each product has its own TDS. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Water quality targets

ParameterTypical guide (low-pressure boilers)
Feedwater hardnessas low as possible, typically below 1 mg/L as CaCO₃
Boiler-water pHabout 10.5–11.5
Phosphate residual (phosphate programme)about 20–60 mg/L as PO₄
Oxygen scavenger residualper scavenger type
Condensate pHabout 8.5–9.2

How the chemistry works

Limits depend on boiler pressure and design; follow guidelines such as EN 12952-12, EN 12953-10 and the boiler maker’s instructions.

  • Phosphate precipitates calcium as a soft, non-adherent sludge instead of hard scale.
  • Dispersant polymers keep sludge and iron oxide suspended so blowdown can remove them.
  • Overfeeding chelants or caustic can attack steel, so dosing is controlled by test results.
  • Many products are strongly alkaline (H314); amine products may also be flammable.

Boiler treatment applications

Industrial steam boilers

Phosphate or polymer programmes with an oxygen scavenger and alkalinity control prevent scale and pitting.

Refinery and petrochemical steam

Large steam networks need internal treatment plus condensate amines and corrosion inhibitors for return lines.

Power and HRSG

High-pressure units use AVT or low-level phosphate on demineralised feedwater.

Food and beverage

Products approved for steam in contact with food, for example under US 21 CFR 173.310, are used for direct steam.

Layup

Idle boilers are protected by wet layup with scavenger and alkalinity, or dry layup.

Main boiler chemical supplier countries

Boiler chemicals are formulated by water-treatment companies in the United States, Europe, the Middle East and Asia, usually close to their customers; the raw materials are global commodities.

Boiler water treatment in Turkey

Turkey has a large base of industrial boilers in textiles, food, chemicals and energy, served by international and local water-treatment companies.

Mercafons supplies phosphate, polymer, scavenger and amine products through its Istanbul office, with programme advice and CoA for each lot.

Boiler chemical price

The boiler chemical price is best compared as cost per tonne of steam, which depends on feedwater quality, blowdown and programme. Request a quote with your water analysis.

Boiler chemical packaging

Packages carry product name, lot number, net weight and hazard labels.

20–30 L jerrycans – Boiler Water Treatment Chemicals packaging | Mercafons
20–30 L jerrycans20–30 kg HDPE jerrycans for small boiler houses.
200 L drums – Boiler Water Treatment Chemicals packaging | Mercafons
200 L drums200–250 kg HDPE drums.
1,000 L IBC – Boiler Water Treatment Chemicals packaging | Mercafons
1,000 L IBC1,000 L IBCs for large steam plants.

Shipment

Alkaline blends are often Class 8 corrosives, and some amine products are also flammable; classification is on each SDS. A 20 ft container holds about 18–20 t. See logistics. HS code: 3824.99.

Storage and safety

Storage

Store in closed containers, protected from frost and sun, in a bunded area. Keep acids and alkaline products apart.

Safety

Wear goggles or face shield, alkali-resistant gloves and protective clothing. Provide eyewash near dosing points.

Boiler water treatment FAQ

Which boiler treatment programme do I need?

It depends on boiler pressure, feedwater quality and steam use. Our engineers can recommend one from a water analysis.

Can chemicals replace a water softener?

No. Feedwater must first be softened or demineralised; chemicals handle the remaining traces.

Why is blowdown needed?

It removes concentrated dissolved solids and sludge so they do not cause scale or carryover.

What causes foaming and carryover?

High dissolved solids, oil or organics; correct blowdown and, if needed, an antifoam help.

How is the programme controlled?

By regular tests of hardness, pH, phosphate or polymer, scavenger residual and conductivity.

Boiler chemical documents: MSDS, TDS and CoA by type

Each boiler product has its own SDS and TDS. See technical documents.

Last reviewed: November 2026