C₇H₈Drag to rotate
3D ball-and-stick model · C₇H₈CH
Industrial chemicals

Toluene

≥ 99.5 %

CAS 108-88-3HS 2902.30
Product family
Chemicals
Forms
Standard grade
Packaging
200 L drums1,000 L IBCISO tank
Request TDS / MSDS

What is toluene?

Toluene (toluol, methylbenzene, C₇H₈, CAS 108-88-3) is a clear, colourless, highly flammable aromatic hydrocarbon with a sweet, pungent odour. It is one of the most widely used industrial solvents.

It is supplied as industrial (solvent) grade ≥ 99.5 % and as higher-purity nitration grade for chemical synthesis such as TDI.

Where is toluene used?

Toluene is used as a solvent in paints, coatings, printing inks, adhesives and rubber, as a feedstock for benzene, xylenes, TDI and benzoic acid in refining and petrochemicals, as an octane component in gasoline, and as an extraction and reaction solvent in pharmaceuticals.

How is toluene produced?

Toluene comes from the same aromatics streams as benzene and xylenes.

  • Naphtha is catalytically reformed, or pyrolysis gasoline from steam crackers is hydrotreated.
  • Aromatics are extracted with a solvent such as sulfolane and separated by distillation into benzene, toluene and xylenes.
  • Nitration grade is further purified to remove sulphur compounds and non-aromatics.
  • Each lot is tested for purity by GC, benzene, non-aromatics, colour, density and sulphur.

Toluene grades

The table compares the grades; each is then explained with its typical uses.

Industrial (solvent)Nitration gradeCommercial / blending
Purity≥ 99.5 %typically ≥ 99.8 %≥ 98 %
ReferenceASTM D362ASTM D841Producer specification
Sulphur≤ 2 mg/kg≤ 1 mg/kgper specification
Best forPaints, inks, adhesivesTDI, benzoic acid, pharmaGasoline blending, fuel uses

Industrial (solvent) toluene

The standard grade for formulators, with fast evaporation and strong solvency.

Typical uses
  • Paints, lacquers and coatings
  • Gravure and flexographic inks
  • Contact adhesives and rubber solutions
  • Cleaning and degreasing

Nitration-grade toluene

Highest purity with very low sulphur and non-aromatics, needed for nitration and sensitive syntheses.

Typical uses
  • Toluene diisocyanate (TDI) via dinitrotoluene
  • Benzoic acid and benzyl chloride
  • Pharmaceutical synthesis

Commercial / blending toluene

Lower-purity toluene where a high-octane aromatic is wanted rather than a pure solvent.

Typical uses
  • Gasoline octane blending
  • Fuel and thinner blends
  • Feed to toluene disproportionation

Typical analysis (industrial grade)

ParameterTypical value
Purity (GC)≥ 99.5 %
Benzene≤ 0.1 %
Non-aromatics≤ 0.3 %
Colour (Pt-Co)≤ 10
Density (20 °C)0.865–0.870 g/cm³
Distillation range≤ 1 °C, including 110.6 °C
Sulphur≤ 2 mg/kg
Water≤ 300 mg/kg

The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue
Molar mass92.14 g/mol
Boiling point110.6 °C
Melting point−95 °C
Flash point (closed cup)about 4 °C
Autoignition temperatureabout 480 °C
Explosive limits in airabout 1.1–7.1 vol %
Vapour pressure (20 °C)about 2.9 kPa
Solubility in waterabout 0.5 g/L

Chemical properties

See PubChem for full data and toxicology.

  • A strong solvent for resins, oils, fats, rubber and many polymers; it evaporates faster than xylene.
  • Nitrates to dinitrotoluene (for TDI), oxidises to benzoic acid and can be converted to benzene and xylenes.
  • A static accumulator: earthing and bonding are essential when pumping.
  • Highly flammable (H225), may be fatal if swallowed and aspirated (H304), irritating to skin (H315), may cause drowsiness (H336), suspected of damaging the unborn child (H361d) and may damage organs on repeated exposure (H373).

Toluene applications

Paints, coatings and inks

Toluene dissolves nitrocellulose, alkyd, chlorinated rubber and other binders and gives fast drying, especially in gravure and flexographic printing inks.

Adhesives and rubber

It is a solvent for contact adhesives and rubber solutions. In the EU it may not be used at 0.1 % or more in adhesives and spray paints sold to the general public.

TDI and chemicals

Nitration-grade toluene is converted to TDI, which with polyether polyols makes flexible polyurethane foam; it is also the route to benzoic acid.

Petrochemicals and fuels

Toluene is converted to benzene and xylenes and is blended into gasoline for its high octane.

Pharmaceuticals

It is a reaction and extraction solvent in many active-ingredient syntheses.

Main toluene supplier countries

Toluene is produced wherever there are refinery aromatics or steam crackers. Large producers and exporters include South Korea, China, the United States, Japan, India, Saudi Arabia and Singapore.

Toluene in Turkey

Turkey produces some toluene domestically and imports solvent and nitration grades for paints, inks, adhesives and chemicals.

Mercafons supplies industrial and nitration-grade toluene through its Istanbul office, in drums, IBCs and ISO tanks with CoA for each lot.

Toluene price per ton

The toluene price follows aromatics benchmarks, crude oil and gasoline blending demand, plus packaging and dangerous-goods freight. Request a quote.

Toluene packaging

All packaging is UN-approved for Class 3 liquids and marked with hazard labels.

200 L drums – Toluene packaging | Mercafons
200 L drums200 L steel drums, about 170–175 kg net.
1,000 L IBC – Toluene packaging | Mercafons
1,000 L IBC1,000 L UN IBCs, about 865 kg net.
ISO tank – Toluene packaging | Mercafons
ISO tankISO tanks, about 20 t, for regular users.Photo: Gerd Fahrenhorst, CC BY 4.0, via Wikimedia Commons (brands blurred)

Shipment

Toluene is UN 1294, Class 3, packing group II. Keep it away from oxidisers and ignition sources; flexitanks are not allowed. A 20 ft container holds about 14–17 t in drums or IBCs. See logistics. HS code: 2902.30.

Storage and safety

Storage

Store in earthed carbon-steel tanks with nitrogen blanket or floating roof, or in closed drums, in a cool, bunded, ventilated area. Limit pumping speed and bond all equipment to control static.

Safety

Use spark-free tools, chemical goggles, Viton or PVA gloves and respiratory protection in poor ventilation. Pregnant workers should avoid exposure. Do not induce vomiting if swallowed.

Toluene FAQ

What is the difference between toluene and xylene?

Toluene evaporates faster and has a lower flash point (about 4 °C) than xylene (about 25 °C).

What is nitration-grade toluene?

A high-purity, low-sulphur grade used for nitration to dinitrotoluene and TDI and other sensitive syntheses.

Is toluene restricted in consumer products?

In the EU, adhesives and spray paints for the general public may not contain 0.1 % or more toluene.

Is toluene a dangerous good?

Yes, UN 1294, Class 3 flammable liquid, packing group II.

Can toluene be shipped in flexitanks?

No. It travels in drums, IBCs, ISO tanks or tankers.

Toluene documents: MSDS, TDS and CoA by grade

All grades share one SDS for toluene; specifications and CoA differ by grade. See technical documents.

Last reviewed: November 2026