PMDIDrag to rotate
4,4′-MDI, main componentOCNH
Industrial chemicals

Polymeric MDI (PMDI)

NCO 30.5–32 %

CAS 9016-87-9HS 3909.31
Product family
Chemicals
Forms
Standard grade
Packaging
200 L drums1,000 L IBCISO tank
Request TDS / MSDS

What is polymeric MDI?

Polymeric MDI (PMDI), also called crude MDI or polymethylene polyphenyl isocyanate (CAS 9016-87-9), is a dark brown liquid isocyanate. It is a mixture of 4,4′-MDI with higher oligomers, giving an average functionality of about 2.7.

PMDI reacts with polyols to form polyurethane and polyisocyanurate. Standard grades contain 30.5–32 % NCO groups, the reactive part of the molecule.

Where is polymeric MDI used?

PMDI is used mainly for rigid polyurethane and PIR insulation foam in sandwich panels, refrigerators, pipe insulation and spray foam. It is also a formaldehyde-free binder for wood panels, a component of coatings, adhesives, sealants and elastomers (CASE), and a foundry binder. It is supplied with our polyether polyols to refining and petrochemical and manufacturing customers.

How is PMDI produced?

PMDI is made in large integrated isocyanate plants.

  • Aniline and formaldehyde are condensed with an acid catalyst to methylene dianiline (MDA) and its oligomers.
  • MDA is reacted with phosgene to the corresponding isocyanates, releasing hydrogen chloride.
  • Part of the 4,4′-MDI is distilled off as pure MDI; the remaining oligomer mixture is polymeric MDI.
  • Each lot is tested for NCO content, viscosity, acidity and hydrolysable chloride.

PMDI grades

The table compares the main grades; each is then explained with its typical uses.

Standard PMDILow viscosityHigh viscosityModified MDI
NCO content30.5–32 %about 31–32.5 %about 30–31 %about 23–29 %
Viscosity (25 °C)about 150–250 mPa·sabout 40–100 mPa·sabout 500–700 mPa·sper product
Functionalityabout 2.7about 2.4–2.6about 2.9–3.0about 2.0–2.3
Best forPanels, appliances, pipe foamSpray foam, wood bindersPIR boards, high-strength foamCASE, elastomers, flexible foam

Standard PMDI

The general-purpose grade for rigid polyurethane foam systems.

Typical uses
  • Continuous and discontinuous sandwich panels
  • Refrigerator and freezer insulation
  • Pre-insulated pipes
  • Cold-store panels

Low-viscosity PMDI

Flows and mixes easily at lower temperatures.

Typical uses
  • Spray polyurethane foam
  • OSB and particleboard binders
  • Foundry core binders

High-viscosity, high-functionality PMDI

Higher crosslinking for strength, fire performance and dimensional stability.

Typical uses
  • PIR insulation boards
  • Fire-rated panels
  • Structural rigid foam

Modified MDI and prepolymers

MDI variants with lower functionality and controlled reactivity.

Typical uses
  • Coatings, adhesives and sealants
  • Cast and microcellular elastomers
  • MDI-based flexible and integral-skin foam

Typical analysis (standard PMDI)

ParameterTypical value
AppearanceDark brown liquid
NCO content30.5–32.0 %
Viscosity (25 °C)150–250 mPa·s
Acidity (as HCl)≤ 0.03 %
Hydrolysable chloride≤ 0.2 %
Density (25 °C)about 1.23 g/cm³

The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue
FormDark brown, viscous liquid
Flash pointabove about 200 °C
Vapour pressure (25 °C)very low (below 0.001 kPa)
Storage temperatureabout 15–35 °C
Water reactivityReacts with water, releasing CO₂
SolubilityReacts with water; soluble in dry solvents

Chemical properties

See PubChem for MDI data.

  • NCO groups react with polyols to urethanes and, with catalysts, with themselves to isocyanurates (PIR).
  • With water it forms CO₂ and insoluble ureas; moisture in a closed drum can build pressure.
  • Prolonged storage above about 40–50 °C forms dimers and raises viscosity.
  • Harmful if inhaled (H332), may cause allergy or asthma on inhalation (H334), skin sensitiser (H317), suspected of causing cancer (H351) and may damage the lungs on repeated exposure (H373).

PMDI applications

Insulation panels

PMDI and polyol systems foam between steel skins in continuous lines to make roof, wall and cold-store sandwich panels.

Appliances

Rigid foam insulates refrigerators, freezers and water heaters.

Construction

PIR boards, spray foam and pipe insulation reduce building and district-heating energy loss.

Wood binders

PMDI binds OSB and particleboard without formaldehyde emissions.

CASE and foundry

Modified MDI makes elastomers, adhesives and coatings; PMDI is part of phenolic-urethane foundry binders.

Main PMDI supplier countries

MDI is made in a small number of large plants. China is the largest producer, followed by the United States, Germany, the Netherlands, Belgium, Hungary, South Korea, Japan and Saudi Arabia.

MDI in Turkey

Turkey has no MDI production and imports PMDI for its large sandwich-panel, appliance, insulation and construction industries.

Mercafons supplies standard and special PMDI grades through its Istanbul office, together with matching polyols, in drums, IBCs and ISO tanks with CoA for each lot.

PMDI price per ton

The PMDI price follows global isocyanate supply, benzene and energy costs, plant outages and freight. Request a quote with grade, volume and destination.

PMDI packaging

Packaging is dry, nitrogen-padded and marked with product, lot number and hazard labels.

200 L drums – Polymeric MDI (PMDI) packaging | Mercafons
200 L drums250 kg steel drums, nitrogen-padded.
1,000 L IBC – Polymeric MDI (PMDI) packaging | Mercafons
1,000 L IBC1,000 L IBCs, about 1,230 kg.
ISO tank – Polymeric MDI (PMDI) packaging | Mercafons
ISO tankISO tanks, about 20–24 t, for regular users.Photo: Gerd Fahrenhorst, CC BY 4.0, via Wikimedia Commons (brands blurred)

Shipment

PMDI is normally not regulated as a dangerous good for transport. Keep it dry and between about 15 and 35 °C; avoid freezing and heat in transit. A 20 ft container holds about 20 t in drums or IBCs. See logistics. HS code: 3909.31.

Storage and safety

Storage

Store tightly closed under dry nitrogen or dry air at about 15–35 °C, away from water, amines and alcohols. Never reseal a drum that may contain water. Use within about 6–12 months.

Safety

Use with good ventilation or extraction, chemical goggles and nitrile or butyl gloves; use respiratory protection when spraying or heating. In the EU, industrial users must complete diisocyanate training under REACH.

Polymeric MDI FAQ

What is the difference between PMDI and pure MDI?

Pure MDI is mainly 4,4′-MDI and solid at room temperature; PMDI is a liquid mixture with oligomers and higher functionality.

What does NCO content mean?

It is the weight percent of reactive isocyanate groups and sets the mixing ratio with polyol.

Why must PMDI be kept dry?

Water reacts with it to form CO₂ and solids, which can pressurise containers and spoil the product.

Is PMDI a dangerous good?

It is normally not regulated for transport, but it is a respiratory sensitiser and must be handled carefully.

Can I get PMDI and polyol together?

Yes, we supply matching polyols and can advise on systems.

PMDI documents: MSDS, TDS and CoA by grade

PMDI grades share similar SDS; modified MDI products have their own. See technical documents.

Last reviewed: November 2026