GilFormulation
Formulated product: composition on the TDS
Industrial chemicals

Gilsonite

Natural asphaltite, drilling grade

CAS 12002-43-6HS 2714.90
Product family
Chemicals
Forms
PowderLumps (crude ore)
Packaging
25 kg bags1–1.5 t big bags
Request TDS / MSDS

What is gilsonite?

Gilsonite, also called natural asphalt, uintaite or asphaltite (CAS 12002-43-6), is a hard, shiny black hydrocarbon resin found in veins underground. It is rich in asphaltenes, softens when heated and dissolves in aromatic solvents and oils.

Grades are defined mainly by softening point and ash content. In drilling, the softening point is matched to well temperature, so the particles deform and seal micro-fractures in shale.

Where is gilsonite used?

Gilsonite is used in drilling fluids and oil-well cement, in road asphalt and roofing, in printing inks, paints and coatings, and in foundry sand. It is also used in some carbon and battery materials.

How is gilsonite produced?

Gilsonite occurs in near-vertical veins, a few centimetres to several metres wide. It is mined underground or from shallow pits.

  • Ore is selected at the face; the purest veins give low-ash grades.
  • Lumps are crushed, screened and milled, usually to 100 or 200 mesh.
  • Each lot is tested for softening point, ash, moisture and solubility, then bagged.

Gilsonite grades

The table compares typical grade families; each is then explained with its typical uses.

Drilling gradeAsphalt / road gradeInk and coatings grade
Softening point160–220 °C, matched to wellabout 160–200 °Cabout 160–180 °C
AshLow to mediumMedium allowedVery low
Form100–200 mesh powderPowder or granulesFine powder
Best forSealing, fluid loss, cementAsphalt modificationInks, paints, varnish

Drilling and cementing grade

Powder with a softening point chosen for bottom-hole temperature. It plugs pores and micro-fractures, reduces fluid loss in oil-based mud and lightens cement.

Typical uses
  • Wellbore sealing in shale
  • Fluid-loss control in oil-based mud
  • Lost-circulation and cement additive
  • HPHT filter-cake improvement

Asphalt and road grade

Added to bitumen, gilsonite raises stiffness and resistance to rutting in hot climates.

Typical uses
  • Road asphalt modifier
  • Roofing and waterproofing
  • Asphalt emulsions

Ink, coatings and foundry grade

Low-ash, low-softening grades that dissolve cleanly in oils and solvents.

Typical uses
  • Printing inks and toners
  • Black paints and varnishes
  • Foundry sand additive

Typical analysis

ParameterTypical range (by grade)
Softening point (ring and ball)160–220 °C
Ash content≤ 1 % to ≤ 15 %
Moisture≤ 1 %
Solubility in toluene≥ 80–99 %
Volatile matterabout 60–80 %
Specific gravity1.03–1.10
Particle size100 or 200 mesh, or lumps

Ash, sulphur and solubility vary by origin. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue
AppearanceShiny black lumps; dark brown powder
Specific gravity1.03–1.10
Softening point160–220 °C, by grade
Bulk density (powder)about 0.6–0.7 t/m³
SolubilitySoluble in aromatic solvents and oils; insoluble in water
Flash pointabove about 290 °C

Chemical properties

Gilsonite is a natural hydrocarbon with a high asphaltene content and some nitrogen and sulphur.

  • Chemically stable and inert in water-based and oil-based muds.
  • Softens and becomes plastic near its softening point, which is why it seals.
  • Compatible with bitumen, oils and many resins.
  • Combustible; fine powder can form explosive dust clouds.

Gilsonite uses

Wellbore sealing

Deformable particles bridge micro-fractures in shale and reduce pressure transmission, helping wellbore stability.

Fluid-loss control

In oil-based mud, gilsonite improves the filter cake and lowers HPHT filtrate.

Cementing

As a lightweight, low-permeability additive, it lowers slurry density and helps cure losses.

Road asphalt

It hardens bitumen and improves resistance to rutting and heat.

Inks and coatings

It gives deep black colour, gloss and hardness in inks and paints.

Main gilsonite supplier countries

The original gilsonite deposits are in the Uinta Basin of Utah, United States, known for low-ash grades. Iran is another large producer, and smaller deposits are mined elsewhere in Asia and Latin America.

Gilsonite in Turkey

Turkey has asphaltite deposits in the southeast, around Şırnak and Silopi, used mainly as solid fuel and in power generation. Drilling and industrial gilsonite traded in the region is mostly imported and milled to grade.

Mercafons supplies drilling, asphalt and coatings grades from approved sources, with softening point, ash and mesh size confirmed on the CoA.

Gilsonite price per ton

The gilsonite price depends mainly on ash content, softening point and mesh: low-ash grades cost more. Request a quote with grade, quantity and destination.

Gilsonite packaging

Bags are palletised and marked with product, grade, lot number and net weight.

25 kg bags – Gilsonite packaging | Mercafons
25 kg bagsWoven PP or multiwall paper bags with liner; 40–50 bags per pallet.
1–1.5 t big bags – Gilsonite packaging | Mercafons
1–1.5 t big bags1 t FIBC for asphalt plants and mud plants.

Shipment

Gilsonite is generally not regulated as a dangerous good for transport. A 20 ft container usually takes about 18–22 t of powder. Keep it away from heat during transit. See logistics. HS code: 2714.90.

Storage and safety

Storage

Store in a cool, dry, ventilated area away from heat and ignition sources. Avoid long storage in hot sun, which can make powder cake.

Safety

Gilsonite dust is combustible. Control dust, ground equipment, avoid sparks, and wear a dust mask, goggles and gloves.

Gilsonite FAQ

How do I choose the softening point for drilling?

Choose a softening point close to the bottom-hole temperature, so the particles soften enough to seal. Our engineers can help.

What is the difference between gilsonite and bitumen?

Gilsonite is a natural, hard resin with a high softening point; bitumen is a soft refinery product. Gilsonite is used to modify bitumen.

Why does ash content matter?

Ash is mineral matter. Low ash gives better solubility and purity for inks and coatings; drilling grades tolerate more.

Is gilsonite used in water-based mud?

Yes, often as a sulfonated or dispersible form, but its main use is in oil-based mud.

Is gilsonite hazardous?

It is not classified as toxic, but fine dust is combustible and can explode in air.

Gilsonite documents: MSDS, TDS and CoA by grade

All grades are the same natural material and share one SDS. TDS and CoA are issued per grade; see technical documents.

Last reviewed: November 2026