EVADrag to rotate
Copolymer segmentCOH
Industrial chemicals

EVA (Ethylene Vinyl Acetate)

Technical and industry grades

CAS 24937-78-8HS 3901.30
Product family
Chemicals
Forms
Standard grade
Packaging
25 kg bags
Request TDS / MSDS

What is EVA?

EVA (ethylene vinyl acetate, poly(ethylene-co-vinyl acetate), CAS 24937-78-8) is a copolymer of ethylene and vinyl acetate (VA). It is supplied as granules with VA contents from about 2 % to 33 %.

More VA makes EVA softer, clearer, more flexible and more adhesive. Grades are therefore named by VA content and melt flow index (MFI), for example EVA 28/150.

Where is EVA used?

EVA serves packaging and adhesive producers. High-VA grades are the base of hot-melt adhesives, an alternative to water-based adhesives on fast lines; low-VA grades are blended with polyethylene to improve film toughness and sealing.

How is EVA produced?

EVA is made in high-pressure plants similar to those for LDPE.

  • Ethylene and vinyl acetate monomer are copolymerised by free-radical initiators at about 1,000–3,000 bar.
  • Tubular reactors make lower-VA film grades; autoclave reactors make high-VA and high-MFI grades.
  • Unreacted monomers are separated and recycled, and the polymer is pelletised.
  • Tacky high-VA pellets are dusted with an anti-blocking agent; each lot is tested for VA content and MFI.

EVA grades

The table compares grades by VA content; each is then explained with its typical uses.

Low VAMedium VAHigh VA
VA contentabout 2–9 %about 10–20 %about 18–33 %
Melting pointabout 95–105 °Cabout 80–95 °Cabout 60–80 °C
Key propertyToughness, sealingFlexibility, foamingAdhesion, softness, clarity
Best forShrink and lamination filmFoam, cable, stretch filmHot-melts, solar film

Low-VA film grades

Tough, easy-sealing grades often blended with LDPE or LLDPE.

Typical uses
  • Shrink and lamination film
  • Agricultural and greenhouse film
  • Frozen-food bags

Medium-VA grades

Flexible grades for cross-linked foam and compounds.

Typical uses
  • Shoe soles and foam mats
  • Wire and cable compounds
  • Extrusion coating

High-VA grades

Soft, polar grades with high MFI for adhesives and encapsulation.

Typical uses
  • Hot-melt adhesives
  • Solar-module encapsulant film
  • Masterbatch carriers

Typical grade data (hot-melt grade EVA 28/150)

ParameterTypical value
Vinyl acetate content27–29 %
MFI (190 °C / 2.16 kg)about 135–165 g/10 min
Densityabout 0.95 g/cm³
Melting point (DSC)about 65–75 °C
FormPellets with anti-blocking dusting
AdditivesAntioxidant as specified

Values differ by grade; the binding data are those in the producer TDS and the Certificate of Analysis for each lot.

Physical properties

PropertyValue
FormGranules of about 3–5 mm
Densityabout 0.92–0.96 g/cm³, rising with VA
Melting pointabout 60–105 °C, falling with VA
Processing temperatureabout 150–220 °C
AppearanceTranslucent to clear

Chemical properties

See PubChem for general data.

  • Polar acetate groups give adhesion to paper, film and metal, and compatibility with tackifier resins and waxes.
  • EVA stays flexible and tough at low temperature, but its heat resistance falls as VA rises.
  • Above about 230 °C it can release acetic acid, so melt temperatures are kept moderate.
  • It is not hazardous and not a dangerous good; it is combustible.

EVA applications

Hot-melt adhesives

Carton sealing, bookbinding, labelling, woodworking and hygiene products.

Packaging film

Shrink, lamination, frozen-food and agricultural film, alone or blended with PE.

Foam and footwear

Cross-linked foam for shoe soles, sandals, mats and sports goods.

Solar and cable

Encapsulant film for photovoltaic modules and flexible cable compounds.

Main EVA supplier countries

EVA is produced mainly in South Korea, China, Singapore, Japan, Thailand, Saudi Arabia, Western Europe and the United States.

EVA in Turkey

Turkey’s footwear, packaging, adhesive and solar industries use EVA, which is mostly imported.

Mercafons supplies film, foam and hot-melt EVA grades to Turkey and the region in 25 kg bags, with documents for each lot.

EVA price

The EVA price follows ethylene and vinyl acetate costs, VA content, demand from the solar industry and freight. Request a quote.

EVA packaging

Bags are palletised, protected from heat and marked with grade, lot and production date.

25 kg bags – EVA (Ethylene Vinyl Acetate) packaging | Mercafons
25 kg bags25 kg PE or paper-PE bags on shrink-wrapped pallets.

Shipment

EVA is not a dangerous good. A 40 ft container holds about 22–25 t and a 20 ft about 15–17 t. Avoid hot containers for high-VA grades. See logistics. HS code: 3901.30.

Storage and safety

Storage

Store dry and below about 30 °C, out of sunlight; high-VA pellets can stick together in heat, so limit stacking. Use within about 12 months.

Safety

Molten EVA causes burns, and overheating releases acetic-acid fumes. Ventilate melt areas and keep pellets off floors.

EVA FAQ

What does VA content mean?

It is the percentage of vinyl acetate in the copolymer; higher VA means softer, clearer and more adhesive EVA.

Which EVA grade is best for hot-melt adhesives?

Usually 18–28 % VA with MFI of about 150–500, blended with tackifier and wax.

How is EVA different from LDPE?

EVA is more flexible, tougher in the cold and seals and bonds better, but has lower heat resistance.

Why have my EVA pellets stuck together?

High-VA pellets block in heat or under pressure; store them cool and avoid tall stacks.

Do you supply solar-grade EVA?

Yes, high-VA grades for encapsulant film are available on request.

EVA documents: MSDS, TDS and CoA by grade

Each grade has its own data sheet. See technical documents.

Last reviewed: November 2026