What is propylene glycol?
Propylene glycol (mono propylene glycol, MPG, 1,2-propanediol, C₃H₈O₂, CAS 57-55-6) is a clear, colourless, almost odourless liquid that mixes fully with water. The pharmaceutical grade reaches ≥ 99.8 % purity, meets USP and EP and is approved as food additive E1520.
It is a humectant, solvent and carrier with low toxicity, so it is used in creams, medicines and flavours. Industrial grade goes into resins, antifreeze and heat-transfer fluids.
Where is propylene glycol used?
The USP/EP grade serves personal-care, pharma and food producers, often alongside glycerin and sorbitol. It also dissolves fragrances and actives that do not dissolve in water, and helps emulsifiers such as polysorbate 80 disperse.
How is propylene glycol produced?
Most propylene glycol is made from propylene oxide; a smaller share is bio-based.
- Propylene oxide is hydrated with excess water at high temperature and pressure.
- The mixture of mono-, di- and tripropylene glycol is dried and separated by vacuum distillation.
- Bio-based MPG is made by hydrogenolysis of refined glycerin over a catalyst.
- Each lot is tested for assay, water, colour, acidity and ethylene and diethylene glycol.
Propylene glycol grades
The table compares the common grades; each is then explained with its typical uses.
| USP/EP | Industrial | Bio-based | |
|---|---|---|---|
| MPG assay | ≥ 99.8 % | ≥ 99.5 % | ≥ 99.5–99.8 % |
| Water | ≤ 0.2 % | ≤ 0.2 % | ≤ 0.2 % |
| Standards | USP, EP, E1520 | Producer spec | USP/EP or industrial |
| Best for | Cosmetics, pharma, food | Resins, antifreeze | Bio-content claims |
USP/EP grade
High-purity grade produced and handled under pharmaceutical and food controls.
- Creams and deodorants
- Oral and topical medicines
- Flavour and colour carriers
Industrial grade
High purity for technical uses without pharmacopoeia certification.
- Unsaturated polyester resins
- Antifreeze and de-icing
- Heat-transfer fluids
Bio-based MPG
Chemically identical MPG made from renewable glycerin.
- Natural-positioned cosmetics
- Food and pharma, where certified
- Lower-carbon formulations
Typical analysis (USP/EP grade)
| Parameter | Typical value |
|---|---|
| MPG assay | ≥ 99.8 % |
| Water | ≤ 0.2 % |
| Colour (APHA) | ≤ 10 |
| Specific gravity at 25 °C | 1.035–1.037 |
| Ethylene glycol / diethylene glycol | ≤ 0.10 % each |
| Residue on ignition | ≤ 0.007 % |
The binding specification is the one in our offer and in the Certificate of Analysis for each lot.
Physical properties
| Property | Value |
|---|---|
| Molar mass | 76.09 g/mol |
| Density at 20 °C | about 1.036 g/cm³ |
| Boiling point | about 188 °C |
| Freezing point | below −50 °C (forms a glass) |
| Flash point (closed cup) | about 99 °C |
| Solubility | Miscible with water, ethanol and acetone |
Chemical properties
See PubChem for full data.
- Two hydroxyl groups make it hygroscopic and a good solvent for both polar and many non-polar substances.
- It lowers the freezing point of water strongly, which is why it is used in antifreeze and heat-transfer fluids.
- It reacts with acids and anhydrides to form esters, the basis of polyester resins and propylene glycol esters.
- It is stable and of low toxicity, is not classified as hazardous and is not a dangerous good for transport.
Propylene glycol applications
Personal care
Humectant and solvent in creams, lotions, deodorant sticks, shampoos and wipes.
Pharmaceuticals
Solvent and co-solvent in oral solutions, topical products and some injectables.
Food and flavours
Carrier for flavours and colours and humectant in bakery products (E1520).
Industry
Unsaturated polyester resins, aircraft de-icing, antifreeze and food-safe heat-transfer fluids.
Main propylene glycol supplier countries
Propylene glycol is produced mainly in the United States, Western Europe, China, South Korea, Thailand and Singapore; India and the United States also make bio-based MPG.
Propylene glycol in Turkey
Turkey’s cosmetics, flavour, pharma and composite-resin industries use propylene glycol, which is mostly imported.
Mercafons supplies USP/EP and industrial MPG to Turkey and the region in drums, IBCs and ISO tanks, with documents for each lot.
Propylene glycol price
The propylene glycol price follows propylene and propylene oxide costs, grade, packaging and freight. Request a quote.
Propylene glycol packaging
Packaging is clean, sealed and marked with grade, lot and dates.



Shipment
Propylene glycol is not a dangerous good. A 20 ft container holds about 17 t in drums or about 20 t in IBCs. Food and pharma grades are shipped in dedicated, cleaned tanks. See logistics. HS code: 2905.32.
Storage and safety
Storage
Store closed, as it absorbs moisture, in stainless steel, aluminium or HDPE; a nitrogen blanket protects bulk USP grade. Shelf life is typically 2 years.
Safety
Low hazard. Avoid mist inhalation and keep away from strong oxidisers; clean spills promptly.
Propylene glycol FAQ
Is propylene glycol the same as ethylene glycol?
No. Ethylene glycol is toxic; propylene glycol has low toxicity and is approved for food, cosmetics and medicines.
What is the difference between USP and industrial grade?
USP/EP grade is made and tested under pharmacopoeia and food rules; industrial grade suits technical uses only.
What do MPG and DPG mean?
MPG is mono propylene glycol; DPG is dipropylene glycol, a by-product used mainly in fragrances.
Is bio-based propylene glycol different?
No, it is the same molecule, made from renewable glycerin instead of propylene oxide.
Is your propylene glycol kosher and halal?
Kosher and halal certificates are available for USP/EP grades on request.
Propylene glycol documents: MSDS, TDS and CoA by grade
Each grade has its own specification. See technical documents.
USP/EP grade
≥ 99.8 %, E1520.
Industrial grade
Technical uses.
Last reviewed: November 2026














