What is pectin?
Pectin (CAS 9000-69-5, food additive E440) is a natural plant polysaccharide made mainly of galacturonic acid. It is extracted from citrus peel and apple pomace and is the classic gelling agent for jams and fruit products.
Its behaviour depends on the degree of esterification (DE). High-methoxyl pectin gels with sugar and acid, while low-methoxyl and amidated pectins gel with calcium, even in low-sugar products.
Where is pectin used?
Most pectin goes to jam, fruit-preparation, confectionery and dairy-drink producers. It is often used with citric acid to set pH, and sometimes alongside other hydrocolloids such as carrageenan or guar gum.
How is pectin produced?
Pectin is extracted from fruit by-products.
- Dried citrus peel or apple pomace is extracted with hot, acidified water.
- The extract is filtered and clarified, and pectin is precipitated with alcohol.
- The pectin is washed, dried and milled; for LM grades it is de-esterified, and for LMA grades amidated with ammonia.
- Each batch is standardised with sugar to a fixed gelling strength and tested for DE, gel strength and purity.
Pectin grades
The table compares the main types; each is then explained with its typical uses.
| High-methoxyl (HM) | Low-methoxyl (LM) | Amidated LM (LMA) | |
|---|---|---|---|
| Degree of esterification | above 50 % | below 50 % | below 50 %, amidated |
| Gels with | Sugar ≥ 55 % and low pH | Calcium | Calcium, more tolerant |
| E-number | E440(i) | E440(i) | E440(ii) |
| Typical use | Jams, jellies | Low-sugar spreads | Fruit preparations |
High-methoxyl
Rapid-set and slow-set types for traditional jams, jellies and confectionery.
- Classic jams
- Fruit jellies and gummies
- Acidified milk drinks
Low-methoxyl
Gels with calcium, so sugar content can be reduced.
- Low-sugar jams
- Dairy desserts
- Glazes
Amidated
Gels reliably over a wider calcium range and can re-set after shearing.
- Yoghurt fruit preparations
- Bake-stable fillings
- Low-sugar spreads
Typical analysis (HM rapid set)
| Parameter | Typical value |
|---|---|
| Degree of esterification | about 68–75 % |
| Gel strength | 150 ± 5 °SAG (standardised) |
| Galacturonic acid | ≥ 65 % |
| Loss on drying | ≤ 12 % |
| pH (1 % solution) | about 2.8–3.6 |
| Lead | ≤ 5 mg/kg |
Each grade has its own specification; the binding one is in our offer and the Certificate of Analysis.
Physical properties
| Property | Value |
|---|---|
| Appearance | White to light-brown powder |
| Solubility | Dissolves in hot water; disperse carefully to avoid lumps |
| Odour | Neutral |
| Standardisation | Usually with sucrose or dextrose |
| Particle size | Fine powder |
Chemical properties
- HM pectin forms gels through hydrogen bonding when sugar binds water and acid lowers pH to about 2.8–3.5.
- LM pectin forms gels when calcium bridges free carboxyl groups, the so-called egg-box structure.
- In acidified milk drinks HM pectin coats casein particles and prevents sedimentation.
- It is not classified as hazardous and is not a dangerous good for transport.
Pectin applications
Jams and jellies
Rapid-set HM for jams with fruit pieces; slow-set HM for clear jellies.
Fruit preparations
LMA pectin for fruit preparations in yoghurt, with good pumpability and stable fruit distribution.
Confectionery
Pectin gummies and jellies with a clean bite and good flavour release.
Dairy and beverages
Stabilises drinking yoghurt and acidified milk drinks.
Main pectin supplier countries
Pectin is produced in Europe, Latin America, notably Brazil, Mexico and Argentina, and China, close to citrus and apple processing.
Pectin in Turkey
Turkey’s jam, fruit-preparation, confectionery and dairy industries use pectin, most of it imported.
Mercafons supplies HM, LM and LMA pectin to Turkey and the region, with gel strength and DE confirmed for each lot.
Pectin price
The pectin price depends on type, gel strength, raw-material supply, packaging and freight. Request a quote.
Pectin packaging
Packaging is food-grade and marked with grade, gel strength, lot and dates.


Shipment
Pectin is not a dangerous good. A 20 ft container typically holds about 10–14 t. Keep it dry and away from strong odours. See logistics. HS code: 1302.20.
Storage and safety
Storage
Store closed in a cool, dry place below about 25 °C; heat and humidity slowly reduce gel strength. Shelf life is typically 2 years.
Safety
Low hazard. Avoid dust clouds and use dust masks when handling large quantities.
Pectin FAQ
Which pectin for jam?
Rapid-set HM for jams with sugar above about 60 %; LM or LMA for reduced-sugar jams.
What does 150 °SAG mean?
A standard measure of gelling strength; pectin is standardised with sugar to a fixed value.
Why does my pectin form lumps?
Pectin hydrates quickly; pre-mix it with five times its weight of sugar before adding to liquid.
Citrus or apple pectin?
Both work; citrus pectin is lighter in colour, apple pectin can give a slightly darker shade.
Is amidated pectin allowed in organic products?
Generally not; check the organic regulations that apply.
Pectin documents: MSDS, TDS and CoA by type
Each pectin type has its own specification. See technical documents.
High-methoxyl pectin
E440(i).
LM and amidated pectin
E440(i) and E440(ii).
Last reviewed: November 2026














