IPADrag to rotate
3D ball-and-stick model · C₃H₈OCOH
Industrial chemicals

Isopropyl Alcohol (IPA)

Technical and industry grades

CAS 67-63-0HS 2905.12
Product family
Chemicals
Forms
Standard grade
Packaging
200 L drums1,000 L IBCISO tank
Request TDS / MSDS

What is isopropyl alcohol?

Isopropyl alcohol (IPA, isopropanol, 2-propanol, C₃H₈O, CAS 67-63-0) is a clear, volatile alcohol that mixes fully with water. Industrial and pharmaceutical grades contain 99.5–99.9 % IPA.

It is a fast-drying solvent, cleaner and disinfectant. Diluted to about 70 %, it is one of the most widely used skin and surface antiseptics.

Where is IPA used?

IPA serves printing, cleaning, pharma and personal-care producers. It is blended with ethyl acetate in flexo inks, competes with ethanol in disinfectants, and is thickened with carbomer for sanitiser gels.

How is IPA produced?

IPA is made from propylene or acetone and purified by distillation.

  • Direct hydration: propylene reacts with water over an acid catalyst.
  • Indirect hydration: propylene is absorbed in sulphuric acid and the ester is hydrolysed.
  • Acetone route: surplus acetone is hydrogenated to IPA.
  • The crude alcohol is distilled and dried beyond the water azeotrope; each lot is tested by GC.

IPA grades

The table compares the common grades; each is then explained with its typical uses.

IndustrialUSP / EPElectronic
IPA (GC)≥ 99.8 %≥ 99.8 %≥ 99.9 %
Water≤ 0.1 %≤ 0.1 %≤ 0.02–0.05 %
Key limitColour, acidityPharmacopoeia testsMetals, particles
Best forInks, cleaning, coatingsPharma, cosmetics, antisepticsSemiconductor and PCB cleaning

Industrial grade

General solvent for inks, thinners and cleaning.

Typical uses
  • Flexo inks and press wash
  • Offset fountain solutions
  • Coatings and thinners

USP / EP grade

Pharmacopoeia grade made and handled for regulated uses.

Typical uses
  • Antiseptics and hand rubs
  • Pharma extraction and coating
  • Cosmetics and perfumes

Electronic grade

Ultra-pure IPA with very low metals and particles.

Typical uses
  • Wafer and display cleaning
  • PCB and component cleaning
  • Optics

Typical analysis (industrial grade)

ParameterTypical value
IPA (GC)≥ 99.8 %
Water≤ 0.1 %
Density at 20 °C0.785–0.786 g/cm³
Colour (Pt-Co)≤ 10
Acidity (as acetic acid)≤ 20 mg/kg
Non-volatile residue≤ 20 mg/kg

The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue
Molar mass60.10 g/mol
Density at 20 °Cabout 0.785 g/cm³
Boiling pointabout 82 °C
Flash point (closed cup)about 12 °C
Explosive limits in airabout 2.0–12.7 %
SolubilityMiscible with water, ethanol and most solvents

Chemical properties

See PubChem for full data.

  • It dissolves oils, resins and many inks, and evaporates without residue.
  • At about 60–80 % in water it denatures proteins and kills most bacteria and enveloped viruses.
  • It absorbs water from air and forms an azeotrope with about 12 % water, so dry grades must be kept sealed.
  • It is highly flammable (H225) and causes eye irritation and drowsiness (H319, H336); it ships as UN 1219, Class 3, PG II.

IPA applications

Printing

Dampening additive in offset fountain solutions and co-solvent in flexo inks.

Cleaning

Electronics, optics, press and surface cleaning that leaves no residue.

Disinfection

Hand rubs, wipes and surface disinfectants at about 70–75 %.

Pharma, cosmetics and industry

Extraction, tablet coating, toners and perfumes, thinners and chemical synthesis.

Main IPA supplier countries

IPA is produced mainly in the United States, Western Europe, South Korea, Japan, China, Singapore and India.

IPA in Turkey

Turkey’s printing, cleaning, pharma and cosmetics industries use IPA, which is mostly imported.

Mercafons supplies industrial, USP/EP and electronic-grade IPA to Turkey and the region in drums, IBCs and ISO tanks, with documents for each lot.

IPA price

The IPA price follows propylene and acetone costs, grade, packaging and freight. Request a quote.

IPA packaging

Packaging is UN-approved, sealed and marked with UN number, lot and dates.

200 L drums – Isopropyl Alcohol (IPA) packaging | Mercafons
200 L drums160 kg steel drums.
1,000 L IBC – Isopropyl Alcohol (IPA) packaging | Mercafons
1,000 L IBCAbout 780 kg UN-approved IBCs.
ISO tank – Isopropyl Alcohol (IPA) packaging | Mercafons
ISO tankISO tanks of about 17–19 t.Photo: Gerd Fahrenhorst, CC BY 4.0, via Wikimedia Commons (brands blurred)

Shipment

IPA ships as UN 1219, Class 3, PG II. A 20 ft container holds about 12.8 t in 80 drums or about 15.6 t in IBCs. See logistics. HS code: 2905.12.

Storage and safety

Storage

Store tightly closed in a ventilated flammables area, away from heat, oxidisers and moisture. Shelf life is typically 2 years; do not distil old stock to dryness.

Safety

Keep away from ignition sources and earth all equipment. Use ventilation, goggles and gloves; vapours cause drowsiness.

IPA FAQ

Why is 70 % IPA a better disinfectant than 99 %?

Water helps denature microbial proteins and slows evaporation, giving longer contact time.

What is the difference between IPA and ethanol?

Both disinfect and dissolve; IPA evaporates a little slower and is not used in food or drinks.

Why is IPA used in offset fountain solutions?

It lowers surface tension and spreads water evenly on the plate; many printers now use less to cut VOC emissions.

Is rubbing alcohol the same as IPA?

Rubbing alcohol is usually about 70 % IPA in water.

Do you supply electronic-grade IPA?

Yes, ultra-pure grades with metal and particle specifications are available on request.

IPA documents: MSDS, TDS and CoA by grade

Each grade has its own specification. See technical documents.

Last reviewed: November 2026