AODrag to rotate
Example: AO 168 phosphiteCOPH
Industrial chemicals

Antioxidants & Polymer Stabilisers

Phenolic, phosphite, HALS, blends

HS 3812.39
Product family
Chemicals
Forms
Standard grade
Packaging
25 kg bagsCartons200 L drums
Request TDS / MSDS

What are antioxidants and polymer stabilisers?

Antioxidants and polymer stabilisers are additives that protect plastics, rubbers, oils and adhesives from oxidation, heat and UV light. Without them, polymers yellow, become brittle and lose strength during processing and use.

The main families are phenolic primary antioxidants, phosphite secondary antioxidants, HALS light stabilisers and UV absorbers, often supplied as ready-made blends. They are added at low levels, typically 0.05–0.5 %.

Where are antioxidants used?

Stabilisers are used by polymer producers in refining and petrochemicals, by masterbatch and compound makers, and by converters of packaging film, pipes, fibres and moulded parts for FMCG and industry. They also protect rubber, adhesives, lubricants and fuels.

How are antioxidants produced?

Most stabilisers are made from hindered phenols and phosphorus chemicals.

  • Phenol is alkylated with isobutylene to hindered phenols such as 2,6- and 2,4-di-tert-butylphenol.
  • Phenolic antioxidants such as AO-1010 and AO-1076 are built from these by addition and transesterification.
  • Phosphites such as AO-168 are made from 2,4-di-tert-butylphenol and phosphorus trichloride; HALS from tetramethylpiperidine.
  • Products are crystallised, dried and supplied as powder, granules or dust-free pastilles, and tested for assay, melting range and volatiles.

Antioxidant and stabiliser types

The table compares the main types; each is then explained with its typical uses.

Phenolic primaryPhosphite secondaryHALS and UV absorbersBlends
ExamplesAO-1010, AO-1076, BHTAO-168, TNPPHALS 770, 944, 622; benzotriazoles, benzophenonesAO-1010/168 1:1 and 1:2; AO-1076/168
FunctionTraps free radicals; long-term heatDecomposes hydroperoxides; processingProtects against UV lightCombined processing and long-term
Typical doseabout 0.05–0.3 %about 0.05–0.2 %about 0.1–1 %about 0.1–0.4 %
Best forPP, PE, ABS, adhesivesExtrusion and mouldingOutdoor film, fibres, partsPP and PE production

Phenolic primary antioxidants

Hindered phenols that stop radical chain reactions and give long-term heat stability.

Typical uses
  • Polypropylene and polyethylene
  • Hot-melt adhesives and elastomers
  • Lubricants and fuels (BHT)

Phosphite secondary antioxidants

Protect the melt during processing and work in synergy with phenolics. See also liquid TNPP.

Typical uses
  • Film and sheet extrusion
  • Injection moulding
  • Colour protection

HALS and UV absorbers

Hindered-amine light stabilisers and UV absorbers protect against sunlight.

Typical uses
  • Agricultural and greenhouse film
  • Outdoor furniture and fibres
  • Automotive parts and coatings

Ready-made blends

Pre-mixed phenolic and phosphite combinations for easy dosing.

Typical uses
  • Polyolefin reactor powder stabilisation
  • Masterbatch and compounding
  • Recycled polymer restabilisation

Typical analysis

ParameterAO-1010AO-168AO-1076
CAS6683-19-831570-04-42082-79-3
AppearanceWhite powder or granulesWhite powder or granulesWhite powder or granules
Assay≥ 98 %≥ 99 %≥ 98 %
Melting rangeabout 110–125 °Cabout 183–187 °Cabout 50–55 °C
Volatiles≤ 0.5 %≤ 0.3 %≤ 0.5 %
Ash≤ 0.1 %≤ 0.1 %≤ 0.1 %

Each grade has its own TDS. The binding specification is the one in our offer and in the Certificate of Analysis for each lot.

Physical properties

PropertyValue
FormsPowder, granules, dust-free pastilles, liquids
SolubilityInsoluble in water; soluble in many organic solvents
DustFine powders can form combustible dust clouds
Storage temperatureBelow about 30 °C for low-melting grades
Shelf lifeabout 24 months in closed packaging

Chemical properties

See PubChem for AO-1010 data.

  • Phenolic antioxidants donate a hydrogen atom to peroxy radicals and form stable radicals.
  • Phosphites reduce hydroperoxides to alcohols and protect the phenolic during processing.
  • HALS trap radicals formed by UV light and regenerate, giving long-term protection.
  • Most grades have low hazard; some, such as BHT and certain HALS, are classified for eye damage or aquatic toxicity.

Antioxidant applications

Polyolefin production

Producers add phenolic and phosphite blends to PP and PE powder before pelletising.

Packaging and film

Stabilisers keep film clear and strong; many grades are listed for food contact under EU Regulation 10/2011 and US 21 CFR 178.2010, with migration limits.

Pipes, fibres and outdoor parts

Long-term heat stabilisers protect pipes; HALS and UV absorbers protect fibres, agricultural film and outdoor products.

Rubber and adhesives

Antioxidants prevent hardening and cracking of rubber and hot-melt adhesives.

Recycling

Restabilising recycled polymers with blends restores processing stability.

Main antioxidant supplier countries

China is the largest producer of polymer antioxidants by volume. Other major producers are in Europe, the United States, South Korea, Taiwan, Japan and India.

Antioxidants in Turkey

Turkey’s large plastics, packaging, pipe, masterbatch and rubber industries import antioxidants and stabilisers.

Mercafons supplies phenolic, phosphite, HALS, UV-absorber and blend grades through its Istanbul office, with food-contact statements on request and CoA for each lot.

Antioxidant price per ton

The antioxidant price depends on type, purity, form and volume; blends and HALS cost more than standard phenolics. Request a quote.

Antioxidant packaging

Packages carry product name, grade, lot number and net weight.

25 kg bags – Antioxidants & Polymer Stabilisers packaging | Mercafons
25 kg bags20–25 kg PE-lined bags on pallets.
Cartons – Antioxidants & Polymer Stabilisers packaging | Mercafons
Cartons20–25 kg cartons with inner PE liner.
200 L drums – Antioxidants & Polymer Stabilisers packaging | Mercafons
200 L drumsFibre or steel drums for liquids and small lots.

Shipment

Most antioxidants are not dangerous goods; some are classified as environmentally hazardous (Class 9). Keep cool and dry, especially low-melting grades in hot climates. A 20 ft container holds about 12–16 t. See logistics. HS code: 3812.39.

Storage and safety

Storage

Store in closed packaging in a cool, dry place away from oxidisers and ignition sources; keep low-melting grades below about 30 °C to avoid caking.

Safety

Avoid dust: use extraction, earthing and a dust mask. Wear goggles and gloves. Follow the SDS of each grade.

Antioxidant FAQ

What is the difference between primary and secondary antioxidants?

Primary (phenolic) antioxidants trap radicals; secondary (phosphite) antioxidants destroy hydroperoxides. They work best together.

What is a 1010/168 blend?

A pre-mixed blend of AO-1010 and AO-168, usually 1:1 or 1:2, widely used for polyolefins.

Are these antioxidants approved for food contact?

Many grades are listed under EU 10/2011 and US FDA rules with limits; we provide statements on request.

When do I need HALS?

When the product is exposed to sunlight, such as agricultural film or outdoor parts.

How much antioxidant should I add?

Usually 0.05–0.5 %, depending on polymer, process and service life. Our engineers can advise.

Antioxidant documents: MSDS, TDS and CoA by type

Each stabiliser is a different substance with its own SDS, TDS and CoA; food-contact statements are available for listed grades. See technical documents.

Last reviewed: November 2026